my flash array will only play the first frame
this is the code
stop();
var t:Timer=new Timer(100,0);
t.addEventListener(TimerEvent.TIMER,preloadF);
[Code].....
I want my MovieClip to play from frame 5 to frame 30 and then stop. How can I do this?
View 5 RepliesI have my flash on multiple scenes, and would like to play an animation when clicking on the navigation button before switching to a different scene.
I'm halfway to accomplishing this.
Here is what i used
Code:
_root.gotoAndPlay("changepage1");
_root.onEnterFrame=function(){
if(this._currentframe=="changepage2"){
[Code]....
The above code is on a blank keyframe. Changepage1 is the start of the animation and Changepage2 is the end of the animation.
Upon clicking the navigation button it plays the above scenes.
However it doesn't change scenes to scene "Home2".
i have a movieclip on stage. it has 3 frames but is stopped with "stop():" so it only shows the first frame on mousedown i want it to play frame 2 for a duration of 1 frame then frame 3.
View 3 RepliesI hope I can ask this correctly. I'll paraphrase.
press_mc.onRelease = function(){
mover2_mc.play()};
This is a snippet of some code I'm working on. Currently I have a mc that you press that plays another mc. That mc that reacts has 5 frames, each frame with stop(); on each frame. I do a normal play code because it lets me play through and cycle back to frame 1 after frame 5 (so if I click the mc it eventually cycles back to the first frame and starts the process over again). If I do a nextframe it stops at frame 5, so that's why I use play.
press_mc click on it and it tells mover2_mc to advance a frame and recycles back to frame one to redo the process.Can I tell press_mc to play and skip a frame or to have it play a list of frames that I tell? I can't do a _currentframe +2 because it'll halt at frame 5.
I am coding a simple movie timeline in Flash CS5 actionscript 3.0. I have all my buttons working except for the Play button which I would like to code to say "go to next frame and play". Here is my current actionscript:
fastforwardBtn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);
function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void {
gotoAndStop(4025);
} stop();
gotoStopBtn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void {
[Code] .....
I have 10 buttons on my homepage and I want to play the same movieclip when you click on a button and after that move to a specific frame for each different button.
Someone know an easy to make this without having to create 10 differents movieclips just to change the action at the end of the movieclip?
I am attempting to animate in the timeline, and then "copy motion as as3" so that I can reuse the animation. The problem is that when I take the AS and put it into a class, it only wants to run 1 frame, and does not continue the animation.[code]...
View 2 Replieshow to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
I am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI built a button in one of the movie clips in my project,
when I release this button, it goes to the 41st frame of the main timeline and continue to play until the frame 70 which has got a stop; command. till here everything's just OK. But I want this button to do something more though I don't know whether it's possible or not.
I want this button to go and play the frame number 41 in the main timeline, and then after it stopped at the frame 70 , then jump to frame 73.
I have a small flash site made up of a number of pages all on the one timeline.
The query is this. When i release a button i want the timeline to roll on for x frames (fading components out) before going to the frame that button links to (The beginning of the new page).
I have no idea what AS to use for this.
No matter where in the timeline you are, the button should fade out that area and then skip to a new one.
When you click a button I want my flash to go to the frame label where the movie clip is located, and then play a certain frame of that movie clip.
View 5 RepliesI'm creating an effect in flash mx where lasers follow a guide path and reveal a word beneath. I was setting it up making it drop behind a square where the spark travelled and i used the setmask command to mask it, problem is, the setmask command only works with one instance at a time! Can i group multiple instances with actionscript? Or can i have it dump the squares on a mask layer with actionscript.I was also wondering if i could just make the script play on every frame without copying it to every frame? I tried the on enter frame deal but it didn't work.
View 3 RepliesI need to play forwards/backwards to target frame(or second) on my videoPlayer when I push a button. How would I do this?
Not sure how to tween the seek() property. I have TweenLite, which normally works great! But just not sure how to do it here..
Using MX 2004. I would like to play the entire movie twice, then start playing a third time until frame 30 and stop.
View 1 RepliesYesterday Kglad gave me the following :
nextTX.onRelease = function (){var nextFrameLabelNum:Number = (1+Math.round(thTX._currentframe/27))%10;
thTX.gotoAndPlay("next "+nextFrameLabelNum);
}[code].....
which works great IF I am moving one image at a time.What I have done now is tween 3 slides to move into a visible mask by pressing next, but when I press previous of course the above doesn't work.It just jumps to the previous three with no tween.I would like to maintain the tween but in reverse.I would like the previous just to undo, in reverse, what the next button just did with the tween?Is there anyway to make this happen with as 2.0?
In this bit of code is there anyway to adjust the gotoAndPlay Command to play from frame 114 to frame 200. Are there any commands that will do this. I want it to play from frame 114 to frame 200 when a button is pressed.
[Code]...
I'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys.The user can hold/press "keypress right" to move to the next (key)frame and "keypress left" to move to the previous (key)frame in the .flv files.I have tested embeeding one .flv movie to the stage and it's working fine.But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween keyframes in the same way if the .flv's are loaded dynamiclly? Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
View 1 RepliesI am using swfLoader to load external flash movies in my flex/actionscript code. If the loaded swf was made for the newer flash player versions (I believe 9.0 or more) it loads as a flash.display.MovieClip object which has methods for play/pause and go to frame. However if the loaded swf was made for older flash player (I believe 6.0) then it loads as flash.display.av1movie which doesn't have methods for play/pause. Is there a way I can play / pause the av1movie from my flex code.
View 2 RepliesI have 2 flash files, one with an intro and the second that just has a document class file that plays out a snake game. How could i import that document flash file and make it play out on like frame 100 off my other flash file.
View 1 RepliesI have two embedded flv's in the timeline, one after the other. There are no errors in the video files. When the "playhead" in the exported swf comes to the end of the two combined videoclips, it jumps back to the first frame of the 2nd video clip for a fraction of a second, before playing from the start of the timeline as it is supposed to. I have explicitly done a "gotoandplay(1) in a separate action layer, at the last frame of the "movie", but that's not what happens.
View 0 RepliesI've got an app based on four frames with seperate events on each frame. The app is powered in AS3 and every frame calls stop(); and everything works well but the swf file in flash player has a problem where if the user hits control > play it moves to the next frame.How can I stop this? A simple conditional would prevent it but errors are triggered this way from ongoing functions from a previous frame.
View 3 RepliesI Am wondering if is possible to use one sound channel to play through an array of sounds? Perhaps by using a complete event or other means?
View 1 Repliesim trying to play a frame in an external .swf with a button from my main flash file.
View 5 RepliesI am designing a website with html pages and flash pages. When the user open a flash page (embedded in an html page) i would want to have a preload script. I found a couple of them but they all need to start at the first frame and have a go to and play script after. So my problem is that I already have an important script that make a image follow my mouse and the script needs to be on the first frame to. Is there any way to have both or maybe to have the preloader on a separate file or even change the way my script is written ?
[Code]...
Error #1009 cannot access a property or method of a null object reference.
But the code I use doesnt have anything that is null..
Mol.addEventListener(MouseEvent.MOUSE_DOWN, mouseDownHandler);
function mouseDownHandler(event:MouseEvent):void {
gotoAndStop("Main");
}
This is the code I have reapeted 5 times on multiply frames. (I do have changed the names ect.)
the "Main" is a label on a frame. When I click on 1 button, it works fine. When I click on the button that leads me back to "Main" it works, BUT then it gives the error and I cant do a thing anymore..
What I'm trying to do is play 5 frames all attached with short audio wav files one right after another. I want to be able to press play for each frame.When I insert either of these codes:
Code:
play_btn.addEventListener(MouseEvent.CLICK, playSound);
}
function playSound(event:MouseEvent):void
[code]....
The video goes straight to playing the frame 1 wav sound file I have there, then when I press the button it rushes through the rest of the sound files in the rest of the frames and starts back at frame 1.Am I missing a code that I need to insert into the other frames, or am I using the wrong coding?