I am using the Flash Player 10.1 emulator to try to emulate an iPad since the iPad emulator doesn't work. I have a touch event using TOUCH_BEGIN and whenever I click on the object, it gets hit twice instead of just once. Is this just an emulator bug, or is there something wrong with my code that's causing it to hit twice?
[Code]....
I have read that the FLVPlayback component has been optimized for the iPad, but I can't get it to work at all.I had it working, albeit poorly, in CS5.But the same app, published with CD5.5, just shows a flickering FLV icon instead of video.
View 1 RepliesI tried to load the flash using webview, it does not work on emulator but when I tried it on my HTC device it worked.
View 1 RepliesI've created an app in Flash Professional CS5.5 and when I install it on iTunes, I see the icon in the list, and when I sync the iPad, it even comes up on the iPad 'pages' in iTunes, however doesn't show up in the actual iPad.
View 1 RepliesI'm trying to put a mp3 player on my web page and it should work on iPad. So, I learned iPad doesn't support Flash. However, apparently partly it does. I couldn't find the information on this. How is it possible: [URL]. That is a mp3 player working on iPad (when browsing on Safari). However, it uses audiojs.swf (1644 bytes) and without that it doesn't work at all. How can iPad use the swf if Flash is not supported? What is another good free mp3 audio player that works on iPad.
View 2 RepliesWhat if I access video delivered through media streaming server on IPAD client. Does it supports?
View 5 RepliesI usually used as3 in flash to develop game, but I always do for a fixed size of file. But in itunes there are a lot of app work for both ipad - 768x1024 and iphone 640x940 (this size is iphone 4) and even different iphone generation has different size too. So how can i use flash to make one app that can work for all of these devices?
View 1 RepliesI decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code:
var i:Number = 0;
var myInt:Number;
var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
I have a button object that I need to scale to align with the variable width of an array of images.However, when I set the width in code, the button does not actually become that width. Tracing out the width gives me the correct value, but on screen.. it's off.
I've proved it to myself by scaling the same button object manually in the properties pane and visually comparing. Both of the buttons below have a width of 410.
Code:
navigatorDown_btn.width = 410;
navigatorDown_btn.x = (stage.stageWidth/2)-(navigatorDown_btn.width/2);
trace(navigatorDown_btn.width); // output: 410
I have a swf that is pretty complicated, you can interact with the page and go to different keyframes and it stops and/or starts depending on buttons, but I want to put it in a fla or something so I can put other swfs next to it and build it up and put several of them together as one.
I don't care about making it too complicated, I just want one interactive swf to go to the next compiled swf when that movie ends, but when I try importing it or loading it it just runs straight through without stopping or paying any attention to the scripting.
I was ecstatic when I learned that flash cs5 would be able to compile android applications.
However when I followed the steps in
Code:
"gotoandlearn.com/play.php?id=123"
Lee Brimelow's video tutorial. I ran into several problems. This link from the video
[code].....
I am trying to more between frames using the data returned from a node n_EventID in an xml, when the node returns "1408" I want to move to frame 1 but if it returns anything else I want to move to frame 2. The part where the code moves to frame 2 seems to work perfectly but I can't seem to move to frame 1 when "1408" is returned.
xmlResultFinish = new XML();
xmlResultFinish.ignoreWhite = true
xmlResultFinish.onLoad = loadXmlResultFinish;
[code]....
I'm having a problem, where random IE's are not able to display my .swf file. All the IE's are IE8 with the latest flash pluggins and all security's are set at Medium, however some IE's get just a grey box and other's get the full flash file. What's going on? It works fine in Safari and Firefox of course, but why so much difficulty with AS3 Flash9 in IE? here is a link to the site, and it's the big image changer at the bottom of the front page.
[URL]
But my proublem is that I have a flash presentation.The defalt for moving the slide screens back and forth are left and right arrows.It works fine when tested or even the .swf fileBut then the left and right buttons don't respond when I go to fullscreen.
View 5 RepliesIs it common for AS3 apps to not work in IE? Is there a way to make them work? I have a movie clip in my library linked to a custom class Main and I have nothing on stage. Just one frame. Everything is built inside that movie clip. I add that movie clip to stage through a document class and everything works perfectly in Firefox and Chrome but when I open it in IE, it's just a blank page.
View 6 Repliesi followed the instructions oh how to make a centered pop up window here :i'm using a mac..nd it works in Safari... but when i try to use explore to open it, the pop up window doesn't come up...why is that.......? did i do something wrong?here is my website:and please click on 'message' to see for yourself.
View 5 Repliesi followed the instructions oh how to make a centered pop up window here : [URL]
i'm using a mac... and it works in Safari... but when i try to use explore to open it, the pop up window doesn't come up..
here is my website: [URL] and please click on 'message' to see for yourself.
I tried to load flash on emulator, it does not loads but when I tried it with my HTC device it worked. I tried it with both gingerbread emulator and froyo emulator.. flash does not works.... while flash pluggin is installed on both emulator.
View 2 Repliesi was generated apk file in flash but iam not abile to run apk file emulator
View 1 RepliesI'm trying to get a webstageview to load a local html file. this code works perfectly on the emulator, but when i run it on my android device (running android 2.3), it does not work. it just creates a blank webstageview that never loads the local html file...the zoom function is intact so i know it's opening the webstageview, but i never see the content.[code]...
View 2 RepliesI just installed all the requirements, JDK, Eclipse JRE and Android SDK. I managed to create something like the touch cat screen miau, but instead of running/testing it in the Android phone, how can I test it in the Eclipse Emulator?
View 1 RepliesIs there a flash player emulator? Ive been trying to find out to help making flash detection scripts and for testing.
View 3 RepliesI was ecstatic when I learned that flash cs5 would be able to compile android applications.[URL]..so i ran into that problem right off the bat. But my seconded problem is I lack an android phone. I can borrow a phone to test with but this won't do for general testing and debugging. I would like to use the emulator but I have no clue as to how to set it up.
View 1 Repliesthis is what i have on the maintimeline:[code]I have 4 moveiclips called: redhex, bluehex, greenhex, and yellowhex.what the above code should do is make a 15x15 grid of hexes (yes i wanted all 4 hex mc's overlapping each other at each space on the grid.).Before i added the lines to dupllicate the blue, green, and yellow hexes also... the redhex movieclip duplicated exactly as it should.But after adding the lines to duplicate the blue, green, and yellow hexes also, in the same locations... Nothing at all showed up when i tested the movie (not even the redhex's)
View 4 RepliesIn the actions of a movie clip,I want to use something like:
PHP Code:
if(Key.isDown(W)){
//do stuff
}
But,it does not take anything else than LEFT,RIGHT and some others.I even tried ASCII:
PHP Code:
if(Key.isDown(100))
{}
It doesn't work.Then how do we use keys like W,A,S,D?
I've made a rounded rectangle with a gradient fill and another rounded rectangle over it with a transparency to create kind of a glossy effect. Both objects are part of a symbol in the library of the FLA file. Then, I activated the checkbox to create a scale-9 grid, and the Export for Actionscript checkbox in order to add this symbol from AS3. Next I made sure that every rounded corner was completely included in the slices on the edges of the grid. Well, no matter what, the object is scaled as a normal graph: the rounded corners appear bigger and deformed.
View 4 Repliesthis is what i have on the maintimeline:
Code:
initialize();
function initialize() {
for (i=1, r=0; r<15; r++, i++) {
for (c=0; c<8; c++) {
[code]...
I have 4 moveiclips called: redhex, bluehex, greenhex, and yellowhex.what the above code should do is make a 15x15 grid of hexes (yes i wanted all 4 hex mc's overlapping each other at each space on the grid.).Before i added the lines to dupllicate the blue, green, and yellow hexes also... the redhex movieclip duplicated exactly as it should.But after adding the lines to duplicate the blue, green, and yellow hexes also, in the same locations... Nothing at all showed up when i tested the movie (not even the redhex's)
I'm in a big distress, I'm using AS2 with CS3 (Flash 9.0 on OSX Snow Leopard) and I can't get the querystring. I don't understand it has always worked before with my previous version of Flash. I'm using this AS code: t_txt.text += _root.age; I have a dynamic text linked to t_txt. For the HTML I simply published using Flash, then I changed in the html file like this:
<param name="movie" value="age.swf?age=56" />
And
<embed src="age.swf?age=56" quality="high" etc >
When I set to use AS1 it just works fine. But I can't use AS1 all my projects are with AS2. So what's wrong?
flash cs5 wont follow s3's redirects, instead it makes an ioerror with http status code 303 which is not an error code, its a redirect code. It doesn't hit the redirect page at all. If i was to save this file as a cs4 doc and run it in cs5, same issue. If if was to open and run it in cs4, it works fine, no error, redirect gets hit.Exactly the same file works in cs4 but not in cs5.
View 1 Replieson my website I have a contact form where you should be able to type into an input text box. For some reason, my website won't allow me to click and edit the input text box. Could the problem be that it is within a movieclip?
View 21 Replies