I am trying to get sounds working in my game and would like to have different sounds play and loop depending on where my player.mc is within its parent mc (game.mc). So if my game.mc is 1000 pixels wide and player.mc.x is <= 500 it will play and loop sound1, and if player.mc.x is > 500 it will play and loop sound2. I have the playing and looping done with a SOUND_COMPLETE listener but if one sound is playing and player.mc moves from one "zone" into the other I cant get the sound to stop and the new one to start. Currently it will only play the new sound once the previous sound ends.
I have probably gone about it all wrong and there will be a much simpler way to achieve this but I cant work it out. What is the best way to do this?
I am using the following to extract the byte info from a sound object - however if I go back to the same sound object and run this again, The byteArray has no bytes available.
var data:ByteArray = new ByteArray; sound.extract(data,sound.length*44.1); data.position = 0; return data;
Is this the correct behavior? Is there not a way to do this multiple times on the same sound object?
I am trying to add a sound to the LineTo() method. Inside a function I draw the Line and immediately call the Sound file. Here is the code, Is this right ? (jus giving the function here )
function leaderRT(e:MouseEvent){ if(flag) { graphics.lineStyle(1, 0xCC00FF); graphics.lineTo(e.localX,e.localY);
[code]....
I want the sound to be played until the line is drawn. Wat modification has to be done ? Also when I execute the above file I get the Stream error ?
What's the purpose of the getBytesTotal() method of the Sound object since it returns the same value as the getBytesLoaded() method? Note that I mean streaming mode here.
I have installed Flash CS4 upgrade successfully with Flash CS3 full. I have also installed Flash CS3 full and then CS4 upgrade, but it made no difference. I cannot test an example that uses sound.extract() method. When I test the movie, I get an error message stating "Call to a possibly undefined method extract through a reference with static type flash.media.Sound".
I am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
I'm tryng to make a public static method call another method, but Flash throws error 1180, sayng that the method called by the static method is undefined.
i have a fortran method which creates random numbers. i want to convert this method to a flash method . I want to get numbers from this method and use them in the delay method of flash.
the fortran method is the folowing
real znew1 , zold1 ,a,m,z1,p,TIME1 a= 16807. m=2147483647 B=2
I have a class called Animal that has a method foo() and I call it out within the Animal class.
Code: protected function foo():void { trace("Animal"); }
I also have a class called Cat that extends Animal and overrides the method foo()
Code: override protected function foo():void { trace("Cat"); }
However when calling the function foo() from the superclass it traces out Animal not Cat (using a Cat object).How can I make superclass call out methods in the subclass?
two classes, both extend EventDispatcher. Static method in 1st class calls instance method in 2nd event not getting caught. [code]also, since dispatchEvent() is an instance method, is there any way of calling it without first instantiating the class? i expect not.
getUser was already in UserService.java. I just created getUser2 and it's identical to getUser. When I try to call getUser2, i get the "Cannot invoke method" error. question: Do I need to specify getUser2 in some other file? like in some configuration file? if so, which one and how do I do it.
Is there a way to get a method's parameters from outside the method? I know that there's an "arguments" property but it's only accessable from within the method. I'm working on a RPC system and need to store the method parameter types in a hash table for easy access later on.
Code: class A{ function A(){ trace("construct"); } private function moo(){
[code]....
yet this doesn't, I'd expect it to: construct, start mooing, moo!, moo!, moo!, ...yet the moo! moo! moo! doesn't appear, as if moo() never gets called it all.
OK, from what I know actionscript in Flex runs asynchronously. I need the ability to run a method in a loop synchronously. Consider this code:
public class CustomerContainer extends VBox { public function CustomerContainer () {
[Code]....
This is not my exact situation as it is a bit more complicated to explain here. There is an abstract class and several custom view objects derived from it. Some of the views are dependent on others being completed first but I cannot seem to order them in the correct order. TIMERS are not an option. Probably not explaining this correctly.
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I am using a flash app. I can send and receive streaming data to FMS by using this app, like the chart I attached. [URL] This app uses RTMP to access to FMS. I want to upgrade this app to display sound level of each client. Is it possible by using Actionscript and FMS? If so, which class should I use?
I have a project that requires me to display the waveform for a uploaded sound. The sound is always an MP3, most of the time 22.05 kHz mono, with speech only. The project are written with Flex/ActionScript 3. It's meant to run in the browser, but might also consider converting to AIR if that can help.
All examples I've found and looked at for generating a wave, are either doing some visualization in real time as the sound is playing, or, the most promising, as3soundeditorlib, keeps the wave already generated, but does it very slowly, seemingly using as long time as playing through the audio would've taken.Is there any way to generate the wave faster than real time?
I have some sounds in my library. They are all exported and have been given class names like C, D, E etc. I have another class that represents a button. This class stores a reference to one of the Sound in my library. I set the type for this variable to Sound. When I try to set it I get the error: cannot convert C$ to flash.media.Sound I try as Sound, for example key.note = note_array[p] as Sound; The value ends up as null.
I want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
How to import sound with AS? Cuz i have tried it and my sound just wount play. Can you explain me where my sound should be and what is the as code for importing cuz i use
mysound = new Sound(); mysound.attachSound("SoundOn"); mysound.start();
and this SoundON from where i get it, i try to add linkage to the sound file but in CS4 i cant find the option;. I do it from the library, adding text into the linkage field but still my sound doesn't want to play?
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
I have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void { var s:Sound = new Sound(); var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
