ActionScript 3.0 :: Add A Sound To The LineTo() Method
Aug 10, 2010
I am trying to add a sound to the LineTo() method. Inside a function I draw the Line and immediately call the Sound file. Here is the code, Is this right ? (jus giving the function here )
function leaderRT(e:MouseEvent){
if(flag) {
graphics.lineStyle(1, 0xCC00FF);
graphics.lineTo(e.localX,e.localY);
[code]....
I want the sound to be played until the line is drawn. Wat modification has to be done ? Also when I execute the above file I get the Stream error ?
View 4 Replies
Similar Posts:
Oct 16, 2004
I found out how to make for example a rectangle via the LineTo method. But how can I change the size of this rectangle and SEE it changing (ie a tween), not jumping from one format to the other? I guess it has to do with using "elapsing time" in the actionscript? I find it hard to get info on this subject. Though it seems important because otherwise it is impossible to create animations.
View 5 Replies
Nov 1, 2010
this is the thing: Using "lineTo" i get a line drawn on stage when dragging a mc. Then i should have four mc (note1, note2, note3, note4) added randomly over this line. I mean, the line is drawn and then over some parts of this line, using x and y of some of the points drawn there, this movie clips should be added randomly. I can make the mc appear randomly, but always in the same point (mouseX, mouseY); i cannot access others x and y of the drawn line. This is my code (noteContainer is a sprite):
Code:
private function drawingAPI(event:MouseEvent):void{
sprite1.graphics.lineTo(mouseX, mouseY);
}
[Code]...
View 9 Replies
Oct 30, 2010
I would like to draw a shape with LineTo (following a motion guide) and having this drawing synchronize to the duration of a sound : if the sound lasts 2 minuts, the drawing should take 2 minuts to be drawn.
View 0 Replies
May 20, 2011
I am using the following to extract the byte info from a sound object - however if I go back to the same sound object and run this again, The byteArray has no bytes available.
var data:ByteArray = new ByteArray;
sound.extract(data,sound.length*44.1);
data.position = 0;
return data;
Is this the correct behavior? Is there not a way to do this multiple times on the same sound object?
View 3 Replies
May 28, 2009
I am trying to get sounds working in my game and would like to have different sounds play and loop depending on where my player.mc is within its parent mc (game.mc). So if my game.mc is 1000 pixels wide and player.mc.x is <= 500 it will play and loop sound1, and if player.mc.x is > 500 it will play and loop sound2. I have the playing and looping done with a SOUND_COMPLETE listener but if one sound is playing and player.mc moves from one "zone" into the other I cant get the sound to stop and the new one to start. Currently it will only play the new sound once the previous sound ends.
I have probably gone about it all wrong and there will be a much simpler way to achieve this but I cant work it out. What is the best way to do this?
View 5 Replies
Sep 13, 2008
What's the purpose of the getBytesTotal() method of the Sound object since it returns the same value as the getBytesLoaded() method? Note that I mean streaming mode here.
View 7 Replies
Mar 24, 2010
I have installed Flash CS4 upgrade successfully with Flash CS3 full. I have also installed Flash CS3 full and then CS4 upgrade, but it made no difference. I cannot test an example that uses sound.extract() method. When I test the movie, I get an error message stating "Call to a possibly undefined method extract through a reference with static type flash.media.Sound".
View 4 Replies
Feb 19, 2007
Download the attached file and test it. Wait a few seconds, maybe 10-20 sec, and then se the a bug appear. It looks nice, but why? I was just playing around with lineTo and then i saw this... What do you think ?
View 5 Replies
Sep 19, 2009
I am making a demo where an object is moved around the screen with a line tracing its movement. The speed of this noticeably slows down over time. I tried it both with an enterFrame and by setting an interval. I imagine it has something to do with the graphics class vector drawing and garbage collection. Here is a simplified version for demo/testing. If you run it you will see the line drawing slow down over time. Is there a way to achieve it without the slow down?
I read somewhere of a technique where you use the bitmap data class to draw on a stage-sized bitmap.(I've never programmed the bitmap data class before).
Here is the code:
code: var lineX:Number = 100; var lineY:Number = 100;
var deltaX:Number = 10; var deltaY:Number = 10;
var lineDrawing:MovieClip = new MovieClip();
this.addChild(lineDrawing);
[Code].....
View 4 Replies
Dec 2, 2009
I'm making a shape (christmas tree) which i can't make with rectangles and circles exc, so i made it with moveTo/lineTo, the problem now is that i can't "call" for it to fill the area inside the shape... how would you do it? Also, i hope i did this the wrong way, because its a really tiresome way of making it. What I've got so far is:[code]
View 3 Replies
Apr 5, 2011
I have this file http:[url].... Basically lines gets drawn where ever I tween the animation.arrow MovieClip. What I'm wanting to do is be able to rewind the MovieClip and have the line erase its self step by step.
View 1 Replies
May 5, 2011
I'm looking to work out the most efficient way to maintain the joining of two points with a line in AS3. Basically, I have a whole bunch of circles that move around, and have a property subNode which will act as an end point for the line. At the moment, the way I'm doing it is extremely intensive:
[Code]...
View 1 Replies
Jan 31, 2010
I have been working on a drawing "game" in my spare time (which is limited). This is probably a common question, if so I appologize. By the way, I do not have the code here, it is on my other computer. Anyway, I was using the lineTo method and a timer listener to fire the addition of each new line segment, if that makes sense. The problem is that when you try to draw an arc quickly, it looks terrible. It draws straight lines. I tried adjusting the timer, which helps a bit but still not great. I looked at the curveTo but could not figure out a logical way to get the achor coordinates. I did some research online and found some that use addChild with bitmaps. I would rather use lines. Has anyone tackled this before?
View 3 Replies
Apr 22, 2010
here I added some source code, but it is not loading the imge
ActionScript Code:
//
graphics.beginBitmapFill(image);
graphics.moveTo(100, 100);
graphics.lineTo(120, 50);
[Code]....
View 4 Replies
Jun 17, 2010
I've got a movieclip of a rectangle in my library which I place on stage to attachMovie. Then I create an empty movieclip which I want to use as a mask on that rectangle clip through setMask. Users kan draw into that empty movieclip. My intention is that only those areas of the rectangle clip become visible where the user is drawing a line. So I used this:
[Code]....
View 4 Replies
Sep 14, 2008
Is it possible to get the values along a lineTo and have movieclips attach along the path?
View 1 Replies
Apr 22, 2010
here I added some source code, but it is not loading the imge
graphics.beginBitmapFill(image);
graphics.moveTo(100, 100); graphics.lineTo(120, 50); graphics.lineTo(200, 50); graphics.lineTo(220, 100);
[code]....
View 2 Replies
Apr 30, 2005
The effect I would like to create is as follows: I have an image movieclip named "myImage_mc", and I want to create a spray paint effect, where the user "paints" whatever myImage_mc is using the lineTo and lineStyle commands. I have the lineTo stuff all done, the problem i have is trying to make whatever the user draws a mask that shows the image.Here's my code so far:
Code:
this.onLoad = function() {
_root.createEmptyMovieClip("empty_mc", this);
[code].....
View 1 Replies
Sep 28, 2010
If I skin a button and use the AS3 graphice.clear() and graphics.lineTo and beginFill to create a shape, the button overlaps other items in the container.
When I use the and mxml to create the same shape, the button is neatly positioned inside the container.
View 2 Replies
Feb 21, 2012
I'm extremely new to flash programming, and suddenly my teacher give me assignment to make a flash about mirror reflection line. Here is my as code to draw a simple line after following some tutorial online.
[Code]....
View 1 Replies
Feb 27, 2010
I have a rectangle drawn
Code:
line1.clear();
line1.beginFill(0xFFFF00);
line1.lineStyle(4, 0x000000);
line1.moveTo(_root.point1._x, _root.point1._y);
line1.lineTo(_root.point2._x, _root.point2._y);
line1.lineTo(_root.point3._x, _root.point3._y);
line1.lineTo(_root.point4._x, _root.point4._y);
line1.lineTo(_root.point1._x, _root.point1._y);
line1.endFill();
line1._alpha=10;
updateAfterEvent();
After the rectangle is drawn I have a button that inactivates the points. I can now change the alpha of the rectangle but not the color. Is there a way to change the color of the rectangle line1? I have tried with
line1._color=0x000000;
But it doesn't work.
View 2 Replies
Sep 17, 2009
using pencil tool inside flash i can create stippled line style, well, im using graphics.lineTo(mouseX, mouseY) to create a drawing API but i need use some in this line a style like stippled stroke, or if is possible use stroke ( and how ) to make the same line using stippled style?
How to custom this line?
View 5 Replies
Nov 16, 2011
how would i target a section of a graphic of lineTo and make jsut that section not visible
here is my current code..
Code:
private function drawLaser():void
{
laserCanvas.graphics.clear();
[Code]....
i want to target the section between draggableVector2 and draggableVector3 and make that section not visble... and i wanat this to be inside of a hittest for whenever the line hits an "obstical"
View 13 Replies
Mar 31, 2009
LineTo() and curveTo() provide basic level drawing. However, the lines these functions produce look like they were drawn by the line or pen tools. Is there any way, through either existing functions or through modifying current ones, that I could made the drawings done through actionscript look like they were drawn using the brush tool?
My first thought was to see if this was in default actionscript and could not find it. My second was to see if someone had already created the class, and while for a time I thought someone had, I lost the link . I guess I could always create the class myself, but I honestly have no starting point (like what algorithm flash uses to create its brushstrokes) and don't want to waste my time if something similar is already in existence.
View 2 Replies
Feb 24, 2010
I have four points which all are dragable. I have a line beeing drawn between the points. Now I wonder if it is possible that when you are ready dragging the points and you have the rectangle you want, to stop dragging and move the whole rectangle. In some way make the drawen rectangle an object where you can get the height and width and coordinates. And move it. Can this be done?
PHP Code:
for(var i = 1; i <41; i++) {
this["point"+i].onPress = function() {
this.startDrag();
this.gotoAndStop(2);
onMouseMove = drawLines;
[Code] .....
View 4 Replies
Jan 20, 2011
I am developing a software in flash in which I need to draw some points in a movie clip dynamically with moveTo() and lineTo() during the runtime of the software. However, later in the future (during runtime), given the (x,y) coordinates of a point, I need to know if this specific point is part of the curve I drew before. Is there a way of doing that without saving the (x,y) coordinates of all the points I have drawn in the movie clip?
View 0 Replies
Jun 12, 2005
i have seen it done before in a tutorial which i cant find anymore.what they did is that;
1. when space is pressed it begins a lineTo from the point of an object resembling the back left wheel.
2. from there it continues the lineTo making a realistic skid.
3. after a small amount of time the skids deletes.
View 13 Replies
Mar 21, 2010
I've built a drawing application. Because I've programmed the option to insert symbols (new movieclips), I needed to create a new movieclip each time I start drawing. The problem is that I now completely messed up my lineTo and moveTo sequence, and it just draws from coordinates which I don't understand where is gets them from.The code section is basically:
stage.addEventListener( MouseEvent.MOUSE_DOWN, startDrawing );
stage.addEventListener( MouseEvent.MOUSE_MOVE, drawer );
function drawer( e:MouseEvent ):void[code].....
I have a main lineDrawing movieclip into which i'm creating a new shDrawing each time the mouse moves. The problem is, because it starts a new movieclip each time - it messes up the coordinates of the line drawing.(btw, I can solve this if I could only do some kind of "lineTo" function on a movieclip, so that it "lines-to" from mouse down to mouse up seamlessly, regardless of the speed of moving the mouse.
View 3 Replies
Jul 31, 2010
I have one simple app, loads an image and then via class that extends shape the user is able to draw. Now I want to create an eraser tool so the user could erase something that he dislikes. As far as I know the easiest way is to make:
Code:
lineStyle(size, 0xffffff,1);
moveTo(mouseX, mouseY);
[code]......
View 7 Replies
