link buttons to a new frame? Similar to this example here so a user can select a tab at the top of the screen and a new page for your time line loads.I know basics of Flash but not sure how to achieve this.I cant attach the file here as its too big .
View 3 RepliesI have an animated logo swf file that loads and runs once on the home page every time the page loads. The logo has been updated to appear in three different colour schemes. I want one scheme to load and when the page is refreshed or revisited, one of the other colour schemes to load in its place. They can appear in any random order, just a different one to the one that played before reloading.Can someone point me to an answer or tell me how to do it? I have found a way in JavaScript but this only works on plain images, not swf files.
View 6 RepliesHow can I play an embedded flv video automatically in a Flash website every time it loads a page?
For example: When I click on the "About" button, I'll go to the About page. On that page, there's an embedded flv that I want to play automatically every time I go to the "About" page.
I am using Flash CS4, I have been looking for a tutorial out there about full screen mode, but haven't find one, what want is something like this: http:[url].....I want the website, in html page to fit the screen as soon as the site loads, in, I mean as soon as the user enter the address in the browser, I want the sire to fit the screen like the URL provided above,
View 2 RepliesI want to make text slide accross the screen when my page loads up. Is there an onload function so that when my page loads up it will play the animation?
View 1 RepliesI have a label on my root timeline called "services". I have a services button inside a movie clip. How do I access the main time line to send it over to the page services? I'm using actionscript 3. Back in the day it would have been as simple as root.gotoandplay("services")
View 5 RepliesMy issue is that for my website I want there to be movies in between the interactive parts of it where the interfaces slide in and out. However, I can't stop a movie from playing over and over instead of playing once and going to the next frame.With 2.0 I haven't been able to find any research that helps me, probably because I don't know the correct keywords to search for.Right now I have my main time line set up with a loading bar on frames 1 & 2, that then jumps to frame 3 where I have embedded a movie (Instance named: mc_start) of the interface sliding in. Preferably after that I need it to jump to frame 4 where the actual interface is.
I can get the movie to end by going into the embedded movie's time line and simply have stop() ; at the final frame, but I can't get it to go to frame 4 on the main time line. If I having something like gotoAndPlay(4) ; on the final frame of the embedded movie's time line, it simply goes to frame 4 of the embedded time line and not frame 4 of the main time line. If there was a command to make it jump back to the main time line instead of the embedded time line, that would work perfectly.Coding on Frame 3 of the main time line to jump to Frame 4 would work if I knew the correct language to detect when the movie has ended (Movie is 191 frames long), so that afterwards it would immediately jump to Frame 4, but I haven't been able to find any resources that will teach me how to do it. Right now having gotoAndPlay(4) ; on Frame 3 of the main time line obviously makes it immediately skip the movie on Frame 3 and jump to Frame 4.
What I have is a movieclip and a button in scene 1 (which is the main timeline).There is an actionscript layer also on the main timeline. what I want to do is when I click the button, it would do a nextFrame(); in the movieclip timeline instead of the main timeline.
View 4 RepliesI am trying to select and highlight a specific row on the datagrid in an embedded swf everytime the movie loads. I am using flash cs3 and actionscript 3 , published on flash player 9. anyone done anything similar? Did quite a bit of searching none of the methods actuall seemed to work.
View 1 Repliesi'm trying to make a character select screen for my game. now i've got a character with an instance name of "Character" and its just one. but i want to make like another scene or something where i can choose the character and the choosen character is used in the game.
View 1 RepliesI am looking for a way to select all the objects, on the main timeline, collectively and changing their visibility, at run-time, as per situation.
View 2 RepliesI'm trying to make a multiplication game, with
123456789 as buttons on the left side
123456789 as buttons on the right side
my goal is to select 4 on the left and 7 on the right, and in the middle to see the result 28. but I don't know how to make 2 buttons to stay selected
if I press 4 on the left, it gets selected properly, and the effects show OK but if I press 7 on right, then 4 deselects, and I'd like 4 and 7 to stand out as selected buttons in the same time
I have a time line of 1441 frames my frameRate is 24 fps so it takes 1 minute exactly to complete the timeline animation I want to Display the Remaining time as file starts I need formula to place in ENTER_FRAME event which displays the time left
View 2 RepliesI have a time line of 1441 framesmy frameRate is 24 fpsso it takes 1 minute exactly to complete the timeline animationI want to Display the Remaining time as file startsI need formula to place in ENTER_FRAME event which displays the time left
View 1 Repliesi want to duplicate a line 4 times, and move each line on Yaxis, with a delay of 1sec each time. I know i must use setinterval+duplicateMovieClip, but i've got pbs :-( actually, i've got my AS code on my line :
[Code]...
How do i change content on a page each time a user visits or refreshes the page? example: the icon on kirupas header changes when the page is refreshed or re loaded. I have searched using dynamic content, but didn't quite find it...I only want to change 1 image..
View 1 RepliesI have a site up that is a "music" site, it is XML and flash and I would like to know if it would be possible to and how would I enable the page so that it shuffles the songs and plays a random song every time the page is loaded.URL...
View 2 Replies1. When you click on the buttons for 2 and 3, ALL three buttons move to a different part of the screen.
2. When you click on the button for 1, ALL three buttons return to their initial position.
Ideally, when the buttons move they would in fact travel across the screen rather than disappear for an instant and reappear in the new locations. Usually I would do this via a motion tween, but I can't figure out how to incorporate one here without conflicting with the other actions and thus messing everything up! I have to use a site structure similar to the one in the example because I need the intros/outros to be different for each mc.
The whole slider moves over to the left as soon as I mouse over any button I don't know why and it wont move when i click on a certain button?
[Code]...
I have a page that can be seen here: [URL]
As you should be able to see, it seems as though the Flash file on the left is causing the one on the right to reload upon final loading. The one on the right will reload itself once the one on the left finishes loading.
I have tested the flash files by themselves and both load only once when loaded by themselves. It seems as though one is causing the other to re-load which is just mind boggling to me.
I just finished making my first flash site, the problem I'm having is that the site loads but is not visible until I double click on the blank screen.
View 2 RepliesI have 25 buttons on a page. Each page loads an external swf. How do i write for each loop that will have the same result, but instead of 25 different pages, it loads the same page with different text. I know the text can be displayed with xml. The xml is not my concern. The for loop is.
View 5 RepliesI have an html page with an .swf in it.when this page loads, i want it to play a certain section in my swf (which I have labelled).Is there a way for me to do this? using javascript?i.e. <body onload=( gotoandPlay (starthere) )
View 1 Replies- When you click on a link in the bottom menu bar of my site, the new page opens at the bottom of that page (instead of the top).
As you can see (from the action script at the bottom of this post ), it's basically just turning on and off the visibility of the pages. So when you click on the Ethnography button, it makes that page visible and the page that you were on, not visible.
So when the button being clicked (the Ethnography button) makes the Ethnography page visible, the page location stays in the same place (aka - the bottom of the page). Is there a quick action script statement that I can add to the EventListener for the button that will tell it to open the new page at the top of the page?
Something like: window.scrollTo(0,0) ?
[Code]....
i want to keep Default one child when my page loads.i have arraycollection of the container.in that i have used repeater whose dataprovider is arraycollection.what i have to do for that? can i put some code in init() function.but which code i should put in it?
View 1 Repliessample button instance = test
Code:
test._visible=false;
var timer = getTimer();
if (timer >=10000){
test._visible = true;
}
what is wrong with this code i want the button to appear 10 seconds after the page loads
i just setup this loader i found on the net:
Code:
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);[code]....
what i dont understand is that everytime i click the refresh page the loader shows up again(this time loading the image faster) but if the image is already in cache the loader should not show at all (?),i would like to achieve a loader that loads the image and after dont come up again everytime.
I am trying to make what I thought would be a very simple random picture display. I have five movie clips named myClip1, myClip2, etc. All are on the first frame of the timeline. Each has this as a movie clip action:
Code:
onClipEvent(load){
_alpha = 0;
}
The frame also has an action like this:
Code:
nClipMax = 5;
// nClipMax being the number of movie clips
this["myClip" + Math.ceil(Math.random()*nClipMax)]._alpha = 100;
When I test this the background (an image) displays but nothing else, the movie clips stay transparent. I have tried several variations without any luck.I am mainly an asp and net developer that uses flash periodically so be gentle.
I have been working in Flash CS3 now for a couple of months and action scripts have been a challenge for me. I have created a site that has 4 areas that play a looping swf file of images. I can get this to work no problem with a behavior for rollover, but what I am looking to do is have the 4 swf files automatically play when the page loads.
The swf file I want to play is really simple, just images of banners.
I'm building a Flash website and have a question which should be really easy to answer.
- When you click on a link in the bottom menu bar of my site, the new page opens at the bottom of that page (instead of the top).
As you can see (from the action script at the bottom of this post ), it's basically just turning on and off the visibility of the pages. So when you click on the Ethnography button, it makes that page visible and the page that you were on, not visible.
So when the button being clicked (the Ethnography button) makes the Ethnography page visible, the page location stays in the same place (aka - the bottom of the page). Is there a quick action script statement that I can add to the EventListener for the button that will tell it to open the new page at the top of the page?
[Code]...