I have just get a actionscript.The cloud is created with actionscript and Text is image as bitmap. I want cloud below image.Image loading script is below:
var myLoader:Loader = new Loader();
var myURLRequest:URLRequest = new URLRequest("CloudExampleLogoCS3.swf");
myLoader.load(myURLRequest);
[code].....
I made an animation in Flash which I want to embed in Flex using SWFloader.
I've imported the tweener class (caurina.transitions.*) to tween a rotation. The animation runs perfectly in Flash.
However, when I embed the animation in Flex, the tweening is gone.
Do I need to import the tweener class in Flex?
I use Flash Player 10 (latest version), Flash CS4 Professional version 10.0.02, IE8 and Flex Builder 3.
I have created two buttons (Button1 and Button2). When you click Button1, an animation pops up. You click on the animation to close it - that works fine. If I then click on Button1 again to replay the animation, the animation does not show. If I click on Button2 THEN go back to click on Button1, the animation plays. Why can I not click that same button twice in a row? What am I doing wrong?
View 2 Repliesim trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 RepliesI have an image on the stage which is bigger than the stage itself:
The stage is 700x550
The image is 2100x1650, and it's registration point is at its center, if I remember correctly.The initial location of the image on the stage is 350,75.I want to make sure that the user will be able to drag the image, as long as the edges of the image doesn't show.here's what I did:
mapRect = new Rectangle(0-mapMC.width/2, 0-mapMC.height/2, mapMC.width, mapMC.height);
and later on:
mapMC.startDrag(false,mapRect);
The the top and the left of the image are bounded well, but as far as the bottom and the right side of the image.
How can I show an image that I have just captured with the webcam?I am able to save that image using PHP but before I save it, I want to show a preview. How can I do this? Here is a snippet of the code that I think can be used to do this:
ActionScript Code:
foo = new BitmapData(640,480);
foo.draw(myvideoobject, scaleMatrix);
[code].......
I have flash animation on my web site, in all other browsers except IE shows. Header is same size as object.
<div id="header">
<object style="width: 760px; height: 128px; margin-top: 3px" codebase="[URL]">
<param name="movie" value="[URL]" />
<embed src="[URL]" quality="high" width="760" height="128" name="myMovieName" type="application/x-shockwave-flash" pluginpage="[URL]">
</embed></object></div>
i want to show a bigger image when the cursor is over the smaller version.
View 9 Repliesi am using the flash xml slide show which is in tutorial section. i want to show a image if the image didnot present @ the location given in xml
View 1 RepliesI'm looking for a SWF animation, something I could place on my webpage and input images via an admin section.So I would put the SWF in place, and then he would feed himself via an XML file I would do (or something like this) that I would construct with a PHP script from a MySQL database. The script would take randomly images from the DB.All I want is the SWF, I can organize myself with the XML/PHP/MySQL thing.
The animation (the SWF) has to be extensible, I mean, I want to specify the width and height of the animation and I want it to scroll from right to left continuously, at an average speed. This implies that the animation could be, let's say 900 pixels wide, there could be numerous images at the same time scrolling from right to left, all images would have to keep aspect ratio (the maximum height specified).
I'm trying to create a slide show type animation, the slide will advance every 20 sec. here is my code:
var timelinePause:Timer = new Timer(20000, 1);
timelinePause.addEventListener(TimerEvent.TIMER, timerHandler);
timelinePause.start();
function timerHandler(evt:Object):void {
this.overlay_mc.nextFrame();
}
My question is; How can I get this timer to reset and run again after the nextFrame() has triggered.
I have sum photos which I suppose to create a flash animation to show those photos but I'm not good in flash and have no idea what to create... As I have quite alot of photos, so I cant use frames onli. Give mi sum suggestions or any free example tat I can download?
(PS. It must be auto-play without user to click anything or to mouseover)
I'm using flash mx 2004 and sorry if I put in the wrong forum....
On a flash time line we've got this movie, it plays and then on the last frame there is action script to stop it. (prevent loopage) However, after the movie stops there are a couple of movie clips that loop forever, one of which is a spinning navigation. The navigation spins and spins for eternity, until you mouse over it. When you mouse over it it stops spinning. Theoretically you can then click on the button, which will lead to the page, that you want to go to.Now, making the buttons lead to the page, that's not a problem. The problem is, that before I want it to jump to another page, I want there to be a....how do we see...entrance animation to play.So like, if you click on blue page, a blue square will fade in on top of the button you just pressed, it will grow larger and cover the page, then bam, new page loads (new page would be designed in blue, thus you get the idea?). I know how to use a button to load movie, to make a complete flash site, but I'm not doing that, I want the pages it jumps to to be in html. But I know about doing that too.
What I don't know how to do is, make the entrance animation show up where the button currently is. Because the navigation is spinning and because it pauses on mouse over, the buttons are never in the same place. I know the loadmovie command can load a movie on top of this one, but it generally just throws it up there, or you can specify a point, but how can you specify that it load starting where the button is?
I am am not a developer but have bought a template which I am modifying to suit my needs. I have made most of the modifications but and stuck on how to change the animation for the image gallery. When I move from one picture to the next the animation effect is something like a bubble burst. This is too flamboyant for me. I would like to change it to something more sleek but have no clue where to start.
View 1 RepliesI have created a web application which records users video from webcam and stores.Once the user recorded his video he can previwe it.All the functionalities works good in local but not in internet.In internet when i preview the video it takes long time to play.some times it stops in the middle.Is there any way to play the video smpoothly or show a loading animation when it buffers.
View 1 Repliesi created flash application with some animation in it, i have to save this as image with the animation
View 2 RepliesI have a task where a user fills in a form and uploads a photo. As a result a HTML page is generated that pass the form data to SWF file using FlashVars.
What i want is that the SWF movie loads the uploaded image and show that at frame no. 400 till 1000
I want to know what steps I have to take and what Code i have to write in order to achieve what I want.
Nevermind, I got it.
View 0 RepliesIs there a way I can do it so at a certain percentage of the preloader a image shows up? Like lets say from 0-49% the background is black then once it hits 50% an image shows up as the background, and stays there until 100% so basicly 0-49% = black background and 50-100% = show an image as a background Is that possible? Also, here is my current code I would like to add that option to: [php]stop(); this.addEventListener(Event.ENTER_FRAME,
loading); function loading(e:Event):void { var total:Number = this.stage.loaderInfo.bytesTotal var loaded:Number = this.stage.loaderInfo.bytesLoaded; bar_mc.scaleX = loaded/total;
[code].....
[code]...
this[newroto].rotographic.gotoAndStop(random(this[newroto].rotographic._totalframes)+1); <-- this line gets the images randomly.. and i wanted it to show all images... like the image on frame 1 the image on frame 2 on frame 3.. this 7 (the var set on the beguining..)
I am a php programmer who has no experience whatsoever with flash. I've got a swf on my website that calls an image. The images it calls can take a few seconds to load and I would like to display something in the meantime to let the visitor know that the site is working.[code]I've done some Googling and I think it is something to do with LoadListener. Am I right in thinking that this "self monitors" the process and that you can use this to display something in lieu of the actual swf loading??
View 10 RepliesI want to have a player that shows a static image to begin with and then plays 2 short .flv files, one after the other and then reverts to the static image.I've found this, which works beautifully for the static image and one movie clip but I don't know how to add the second movie clip.
startBtn.onRelease = function() {// make sure your video has an instance name of vid// and it is NOT set to auto play.vid.play();this._alpha = 0;};var listenerObject:Object = new Object();listenerObject.stopped = function(eventObject) {startBtn._alpha =
[code].....
I am trying to do this also, only with one static image at the beginning and then the option to play the flv file: Here is where I am at the moment:In the .fla file in Flash CS4 Have the FLVPlayback Component and the FLVPlaybackCaptioning Component (with related .xml file) plus the Caption Button Component inserted, and all work fine.At this point have made the video with controls the bottom layer on the timeline. The FLVPlayback Component instance name is vid. Next layer is the still image as a graphic symbol.Top layer is the actions layer.On the actions layer I have place the code as shown in the previous answer, before you tweaked for the two videos:I get five compiler errors, which I have attached a screenshot of as a jpg file. I am very new to AS, understand code, but not AS code.
[Code]...
I am just wondering if it is possible to show an image instead of flash content for mobiles? I want to allow the adobe sniffer to do its thing when it is people using pc and mac browsers and direct them to the plug in page to download the flash player if they need it, but is there a way to sniff for a mobile / smart phone browser and if they cant view flash it will show an image instead?
View 1 RepliesI CANNOT see my image files when I import them. This is the case regardless of whether I import them directly from my image files, or from my Flash library. They WILL NOT show up in the stage area, although the panel on the right shows the file! What can I do to correct this? I am using Flash CS4 which I need for my Digital Design classes through the Art Institute of Pittsburgh! I will FAIL this course if I can't get this program to work properly!!
View 7 RepliesWe need the button to display an image on a button when clicked for a tic tac toe game.
View 2 RepliesI want show a image onmouse over inside data grid to each row, so if I click on that image, some function should call(as per my requirement).
<mx:DataGrid width="320" height="624" verticalScrollPolicy="on" dataProvider="{blocked_Usernames}" editable="true">
<mx:columns>
<mx:DataGridColumn headerText="Blocked User Name" dataField="blockedUsernames" editorDataField="value"/>
<mx:DataGridColumn width="20" editable="false">
<mx:itemRenderer >
<mx:Component >
<mx:Image source="@Embed('assets/image/Close.png')" width="10" height="10" autoLoad="false"/>
</mx:Component></mx:itemRenderer>
</mx:DataGridColumn></mx:columns></mx:DataGrid>
I would like to show some images and text in the same line. The text and image is completely dynamic. At first I thought to use htmlText property of TextField as img tag is supported. Something like this:
var tf:TextField = new TextField();
tf.htmlText = "before img <img src='img.png'> after image";
addChild(tf);
But I found that the image is showing in the next line, not in the middle of two text segments. Then after checking the manual of TextField I have found that this is the documented behavior that the image will be shown on the line following the img tag.
So what is the best way to do this? Note that the text and position of images are completely dynamic.
I understand that it is possible to split the input in a series of texts and images and then position them calculating the text and images width. In other words parse the input ourselves.
Is there any better way to do this? Or is there any library available that does this parsing?
I have some 3rd party Flash SWFs on my site that are up to 100KB in size. e.g. the Flash video player "JWPlayer" SWF is 98KB.
That's fine for people with Broadband, but not so good for the slow dial up bandwidth visitors. e.g at 40 kbits/s, we're talking 20 seconds to download.
The problem is that on slow connections, all the visitors are seeing is a static white screen, and so may close the page thinking it's dead. If I right click the area where the SWF is to go, an Adobe Flash Player Object is occupying the space, but the 3rd party SWF has not finished loading in yet.
I would like the website visitors to see a loading spinner GIF or something similar.
Unfortunately, none of the 3rd party SWFs have "preloader" element. And they are not open source, so I cannot add a preloader to them.
Is there any way to display a loading image, prefereably a GIF animation, while the SWF is loading?
For example, is there any way to force the Adobe Flash Player to show an image while it is loading in the SWF?
I don't have any Flash coding skills, so a solution that doesn't include creating an extra SWF or a SWF within a SWF would, probably isn't best for me, but might be worth adding to the post in case other people have a similar problem.
I have a list of artist, each one a mc, in a vertical display. Next to them, I have a holder in which I load the thumbnails one the mouse is over a mc.This images, are being loaded via loadclip.. resize-center and then shown with alpha..But sometimes, the image are shown huge, and instantly resized and positioned.This a dvd project.. so images are not being downloaded..this is the part of the code..
Code:
thumb.onRollOver = function() {
this.gotoAndPlay("rollOver");
[code].....