ActionScript 3.0 :: Splitting A Mp3 (Sound) Into Small Segments?

Jan 13, 2009

I am looking for a way to split a loaded mp3 Sound into small segments. I have googled around but cannot find anyth on the matter. I am begining to think it is impossible. My approach was to load the mp3, then use the extract function to extract all the bytes. now for every small section when the user wants to play it it is filled using SampleDataevent with some values from the array. At first i tried to do my idea by loading an mp3 into a bytes array then writing it to a new file and playing that file but it does not work:

Code:
var snd:Sound = new Sound();
snd.addEventListener("complete",loaded);
snd.load(new URLRequest("Burn.mp3"));

[Code]....

View 0 Replies


Similar Posts:


ActionScript 3.0 :: Load() Function From The Sound Library Splitting Mp3 Files To Too Many Packets?

Oct 16, 2011

I paid someone to write a Flash application, he did what I asked him, but there is one problematic aspect that he doesn't know how to approach:The application consists of many small mp3 files that have to be preloaded in the beginning. The problem is that is takes FOREVER for these files to load. I changed the server to a VPS and nothing changed.The programmer uses the load() function from the sound library to load the mp3 filesI installed an HTTP packet sniffer and found out that every file is being split to many small packets, 1.3Kb in size each. So for example a 76Kb mp3 file is loaded in over 60 requests!

View 8 Replies

ActionScript 1/2 :: Loop A Small Sound File?

Apr 28, 2010

I am trying to loop a small sound file (wav file because I was told wav will loop seemlessly)...in any case, got the actionscript (2.0) to work with one simple button that acts as a start and pause...  but yet, the file still doesnt loop. 

View 8 Replies

ActionScript 3.0 :: Build A Small App That Will Iterate Through An Array Of Sound Files To See If They Are Valid?

Sep 11, 2009

I'm trying to build a small app that will iterate through an array of sound files to see if they are valid.I'm simulating corrupt sound files by taking .png's and changing the extension on them to .mp3 The idea is a sound will start playing and the timer will start. When the sound is done playing the next sound will start and the timer will reset and start counting down again. If a sound does not finish within 45 seconds the timer will complete, output the name of the file that did not finish, and then skip to the next file. For some reason though the timer does not reset when the sounds finish playing, it just keeps counting down from wherever it is.

Code:

import flash.display.Sprite;
import flash.net.URLRequest;
import flash.media.Sound;
import flash.media.SoundChannel;

[code]....

View 1 Replies

Flash 9 :: Loading A SWF In Segments?

Oct 9, 2008

I have a site that is image heavy and right now I have it so everything loads at once with a preloader and once it is all loaded the the site starts. I know I can load images through XML but i never liked doing that since the images seem to load at different rates.

Is it possible to only have certain parts load? Say I want only the homepage content to load when a user hits the site. But if they go to another area then another preloader would show up and that would load.The one thought I had was to have different swfs for different segments, but I wonder how that would mess up the flow of the site.

View 0 Replies

ActionScript 2.0 :: Trace Segments In It?

Jan 24, 2009

What is the equivalent of the following program in AS 2.0?

In other words, how can I trace segments = a line between 2 points defined with their coordinates (x1,y1) and (x2,y2) ?[code]...

View 2 Replies

Regex :: Replacing Segments Of A String?

Jun 6, 2011

I have absolutely no knowledge in Regex whatsoever. Basically what I'm trying to do is have an error class that I can use to call errors (obviously) which looks like this:

package avian.framework.errors
{
public class AvError extends Object
{

[Code].....

The idea is to replace {0} with the first parameter parsed in ...params, {1} with the second, etc.

I've done a bit of research and I think I've worked out that I need to search using this pattern:

var pattern:RegExp = /{d}/;

View 3 Replies

ActionScript 3.0 :: Playing X Segments Of A Mc In Succession?

Sep 25, 2011

I have a movieclip that shows the waterlevel rising in a glass. Frame 0 is named "empty", frame 20 is named "1/3", frame 40 is named "2/3" and frame 60 (the last frame) is named "full". Each of these keyframes contains the actionscript stop();

I have a variable in my main timeline, that contains a number ranging from 1-4. Depending on that number I want the glass to fill. e.g. var howFull:uint = 3 ---> the movieclip should playback from frame 0 to frame 20 AND THEN to frame 40. I've tried using nested if statements to make the mc segments play in the right order:

[Code]...

View 3 Replies

ActionScript 2.0 :: Preloader That Loads MC In Segments?

Oct 17, 2005

I have a MC named "preloader". Inside this MC got 10 frames and each of it represents a pencil. Frame 1 had 1 pencil, frame 2 had 2 pencils... and so on until frame 10(10 pencils ofcoz)After that I adding 3 frames on my root. Frame 1 is Actionscript as follow:

Code:
totalBytes = Math.round(getBytesTotal()/1024);
loadedBytes = Math.round(getBytesLoaded()/1024);

[code]......

View 4 Replies

ActionScript 1/2 :: Intersection Of Line Segments Vs. HitTest?

Nov 2, 2009

I'm trying to improve upon the hitTest() function.I have a game in development that involves square robots, rectangular wall shapes, and line segment shots rotating and moving around. Without the rotation, hitTest works fine, but with rotation, problems arise.Walls at rotation 0,and square robots work fine. There is a small amount of funkyness with a rotated robot by a wall corner, but it's not very noticable.The big issue is collision of two rotated square robots.
 
I can create a function to get the line segments that make up each robot, and the check to see if any intersect. This will mean finding the location of eight points (using height and width and some trig to deal with rotation), finding the slope of eight lines, and then testing lines for intersection up to 16 times. This would be needed to find the intersection of each pair of robots. Those are worst case numbers, some colisions can be detected or ruled out before getting that far in the algorithm, but this check would need to be run every frame against all robots and walls and shots (shots could be a single line segment, though)Right now I'm talking about 8 robots max, maybe 6-20 walls, maybe 5-80 shots on screen @ 30 frames a second.
 
This is easy enough to create, but before I spend a day coding it all, I'm wondering if the computation requirements are going to make it prohibitive.(If so, I'll probably have to switch to circular robots).I feel like there should be a simple formula to find if two rectangles on a cartesian plane intersect, but I can't find one.

View 3 Replies

Professional :: Anchor Points On Line Segments?

Feb 14, 2010

Closed path made with pen tool in Flash MX  comprises of line segments & curved segments both.While adding anchor points on segments it is noticed that pen tool adds anchor points on curvaceous segments but not on line segments. Why is it so ? Is their any way to accomlish this task ?

View 5 Replies

Professional :: Minimum Amount Of Segments With Pen Tool?

Oct 28, 2011

I have a really basic question using the pen tool in Flash. Is there a minimum amount of segments (or something that I'm not doing) that need to be drawn in order to close a polygon shape created with the pen tool. I've found in many instances I seem to be closing the polygon and yet when I go to fill the object it won't fill. I then discover that the beginning and end points are not "joined" together (as in Illustrator).

View 4 Replies

Media Server :: Extract HDS Fragments And Segments From A .f4f?

Mar 13, 2012

I'd like to be able to manually extract the HDS fragments and segments from a .f4f file.  I have the .f4m and .f4x as well.  Once extracted, I'd like to be able to host the fragments and segments on a standard origin (web) server such as Amazon S3.  Is there any way to do this?  If not, does Adobe have any plans on releasing such a tool?

View 1 Replies

Flex :: Draw Segments Linechart In Different Color

Mar 19, 2010

I'm doing some line charts in my Flex application, and I need to draw segments of those line chart in different color. Does anyone have an idea how this could be achieved? For instance, if I have a code like this (actually, I have given this trivial example for simplicity (the problem is the same)):

[Code]...

View 1 Replies

ActionScript 2.0 :: Flash Mx Loading Large Mp3 In Segments?

Oct 23, 2009

I have an Mp3 which is approx 100mb on my server how can i load only small segments at a time so that when people listen to the mp3 it not downloading the full 100mb mp3 file all the time

i am using streaming mode, here some of my code i am using the loadsound command

[Code]...

View 0 Replies

ActionScript 2.0 :: Frameset - Flash Segments: How To Send Values

Dec 20, 2005

I am in the planning stage of an application. In fact, the application already exists but I am thinking about how to improve it. It's a sports event commentary viewer- it allows the user to view live commentary on soccer games, written by news scouters during the process of the game. Right now, it's all one big file, reading 7 different XML files on the fly, evaluating and processing them and displaying the data on screen.

It works well enough like this but now the whole thing is supposed to be expanded with live news feeds and a videoclip gallery, etc... and even though it would be possible to just keep expanding the file, I thought it would be cool to instead make several segments and put them in an HTML frameset. Now the question is: Is it even possible to pass values from one flash file that is running in one frame- to another one, running in another frame? Of course I will know the framename- so could use getURL with the framename as a target... but that would fully reload that frame and "cold-restart" the swf in that frame- I don't want that.

[Code]...

View 10 Replies

ActionScript 3.0 :: Poor Scaling When Drawing Some Long Lines Segments

Nov 19, 2009

I ran into a problem when attempting to draw long line segments - some lines will be poorly scaled and appear very thick. I ran into this issue when building a Google Maps Flex application and thought the problem resided there, but I then tested with a basic Flex application and duplicated the problem.

Here it is:
Code:
var _lineSprite:Sprite = new Sprite();
Application.application.rawChildren.addChild(_lineSprite);
_lineSprite.graphics.lineStyle(
6, // thickness
0xFF0000, //color
1.0, //opacity
true, //pixel hinting
LineScaleMode.NONE);
_lineSprite.graphics.moveTo(-70000,-20000);
_lineSprite.graphics.lineTo(400, 400);

The code above will draw a line segment that is much thicker than the desired 6 pixels. The problem can be seen here: [URL]. Once the page loads, click the "Show Custom Polyline" button, then the "Zoom to Problem Coordinates" button and you should see two line segments - one very thick and one thin. They should both be the same width as the thin line. Strangely, in the code sample I posted above, if the starting coordinates for the line are changed from -70000, -20000 to -70000, 20000 or to -140000, -40000 the line draws correctly. I'm using Flash Player 10.

View 0 Replies

ActionScript 2.0 :: [FMX] - Splitting A Variable?

Apr 2, 2003

If I have a variable

a = 456

how can I get the numbers from it like

a1 = 4
a2 = 5
a3 = 6

View 4 Replies

ActionScript 2.0 :: Splitting A Var By Length?

Sep 15, 2004

i have a var lets say 'x' x="i like cheese and want to eat it everyday" i want to split the var x by every 10'th character, assuming the 10 chracter is not in the middle of a word , then i want it to split it before that so that no words are not cut out...

ex:
x="i like cheese and want to eat it everyday"
arr[1]="i like " 7chars causs 10th char was inside 'cheese' and spliting of words is not allowed
arr[2]="cheese and " 10 chars exactly , splits at space
arr[3]="want to " 8 chars 10th char inside eat .. u get the idea by now i hope
arr[4]="eat it "
arr[5]="everyday"

so its splitting the variable every 10th character.. if the 10th chracter is a space, if it is not it backs up to the previous space and for the next array slot starts from there

View 5 Replies

Flex :: GWT Style Code Splitting?

Dec 22, 2009

I do a lot of work with GWT but don't have experience of Flex. I was talking to a guy today who was looking at moving some large Flex based applications to GWT due to the Flex application getting too big and using too much memory in the browser. This is a problem I have had before with GWT - browser apps using lots of memory as all the code gets loaded when it starts.

However, in GWT 2.0 there is now a code splitting feature to overcome the problem of the client code getting too big. This allows all the code (javascript) not to be loaded as one big file on start up but instead code split into different files that can be loaded when required.

I was thinking as to if there is anything similar in Flex. I assume the Flex application code all lives in one single SWF file which loads at start-up so this approach is not possible but thought there might be other solutions.

View 1 Replies

Javascript :: Splitting A File Before Upload?

Nov 4, 2010

On a webpage, is it possible to split large files into chunks before the file is uploaded to the server? For example, split a 10MB file into 1MB chunks, and upload one chunk at a time while showing a progress bar?

It sounds like JavaScript doesn't have any file manipulation abilities, but what about Flash and Java applets?

This would need to work in IE6+, Firefox and Chrome. Update: forgot to mention that (a) we are using Grails and (b) this needs to run over https.

View 4 Replies

ActionScript 3.0 :: Splitting Up A Large Project?

Nov 4, 2009

I'm currently working on a little project of mine, where I have a character and a number of different items like clothing,hairstyles etc, which over time.. hopefully will grow into a tremendous amount.The thing is, if I have eveything in one fla file, there'll come a time where it becomes too bloated/large and Flash will eventually lag.So, is there anything way I can keep for example.. all the clothing in a separate fla/swf and the main character in another fla.But when I publish.. They all combine back together?I customise the character dynamically with references to linkage identifiers.. So I need a way which allows them to be split into different swfs, but still be able to call to the right clip.

View 6 Replies

ActionScript 2.0 :: LoadVars Result Is Splitting?

Oct 8, 2007

I am always using LoadVars to load in data from PHP or whatever and it normally always works. But some times my result data is split into multiple variables when there is only meant to be one var. I think it always splits on ampersands ("&") which makes sense, as they are used to tell Flash when a new var is starting.

I was wondering if anyone knows more about this, and if there is a way around it. Usually I get around it escaping the characters on server-side, but I recently have a project where I cant change the data that is sent to me.

View 1 Replies

Professional :: Tricky Animation Function - Copy Paste One Of The Segments Into A Separate Layer

Oct 3, 2010

its a door make up of 8 segments, im trying to animate it by making it open and close equaly,each door segment. but my segment is distorting because im doing each one segment bt segmet.is there a way to achieve this in flash?

a):should i copy paste one of the segments into a seperate layer using that one animation i got for all 8 parts?

View 6 Replies

Splitting Animated Shapes Onto Separate Layers?

Dec 1, 2010

Here's what I'm trying to do:

I'm doing some animated characters (I'm on CS5), and I'm trying to optimize the animation/rigging process to save time and manpower (there is very little of both).

The characters all have multiple animations, which are stored each in their own movieclip, which in turn is placed on a main movieclip where each animation verb (states) is stored on a frame, so we can switch between animations (the usual game character setup)

Each state movieclip has the entire animation on it's timeline. they have about 20 layers, each with as few objects as possible in them... The idea was that later, these layers could be moved onto movieclips of their own, to allow for character customization (changing colors and whatnot)... This seems like a pretty straightforward setup, but there is a snag.

Some objects that need to be moved onto movieclips are sharing layers with other objects that don't, despite my best efforts to plan ahead and prevent that (hence the 20 layers, which obviously weren't enough).

So my question is:

Is it at all possible to select shapes across all frames of a layer? I know you can edit multiple frames, but I haven't found a way to select a specific shape across all frames.

For a better unerstanding of the situation, imagine that a layer might contain the shaped for an arm. They're all at shape level, and the only separation between the different arm sections are the different colors each has, which makes it possible to select a single shape on a single frame just by clicking it (which will 'flood fill' the selection).

Now, with edit multiple frames on, clicking a shape will only select it on a single frame, and drag selecting will select a rectangular area across all frames.

What I'm looking for is a way to 'flood select' a shape across all frames, so I can select, say, the upper part of the arm across all frames, and then delete it, leaving me with a layer that only has the lower part (and a previously coped layer that can have the lower part removed, effectively separating them).

Shift/Alt/Ctrl/Right clicking won't work here... there doesn't seem to be one of Adobe's obscure shortcuts for this..

View 1 Replies

ActionScript :: Splitting Flash Design And Coding?

Oct 14, 2009

Hi, I am brand new to Flash and I come from other development environments so I have a question about a possibility. I am aware that you can have a symbol (like a MovieClip) use a custom class to handle how it responds to the world, but I was wondering if it's possible to be able to set some values via flash without having to touch code. For example, I create a MovieClip called Crate, which has a class that lets it be destroyed, but then the designer wants to specify that certain crates have contents inside of them. Is there any way to do that in flash without having to create a new class for the crate?
 
In other words: the designer puts a Crate in the world and then sets a propery (for example: contents = TennisBall) and the Crate class handles the rest. Will this work? Also, am I right to understand that instances of symbols are all the exact same? So I can't have the designer create a new instance of Crate and then change it to be a little different (like draw a sticker on the Crate), but still have it be the same as all the other Crates?
 
I hope these questions make sense and I apologize if I asked this in the wrong forum. I'm very interested in developing games for flash, especially after the news that CS5 will let you export to the iPhone, but I'd like to keep the code away from the designer as much as possible,

View 2 Replies

Actionscript 3 :: Splitting Values And Putting It In A Text Box ?

Mar 28, 2011

I enter a set of 4 values in one text box and i display it in a splitted way in 4 other small text boxes using this code:

array.push(Number(t1.text));
array.push(Number(t2.text));
array.push(Number(t3.text));[code]........

But now I need to know how to do the same thing for any dynamic value that is entered.Say I have a text box tt1 and a button b1. When I enter any value (say 6) this number of text boxes are created (6 new text boxes with names t0,t1....t5)I have another text box tt2 and a button b2. When i enter a set of values in it (say 10,66,33,45,2,4) I need these values to get displayed in those text boxes t0,t1,t2..

View 2 Replies

ActionScript 3.0 :: Splitting Up A Class Into Multiple Files?

Jul 15, 2009

I've got a class that I create that extends the EventDispatcher class. My class has lots of variable declarations and getter and setter functions. I would love to split up the class into multiple AS files so that I can organize the variables and functions by category. Is there any way to do it and still maintain a relationship between all of the files so that one can easily call a function or a variable that exists in another? And so that other classes in my application can refer to one reference when accessing public functions in any of the AS files.

View 3 Replies

ActionScript 3.0 :: Splitting The Code Into Separate Files?

Oct 22, 2010

I'm looking for some help with the following script:

Main Class:

Code:
package {
// Flash Classes
import flash.display.MovieClip;
import flash.events.Event;

[code]....

Now, I'd like to move the blue color coded script to the separate package. When I do that, I've got many reference errors. how the code should look like, when it's in separate package, with all the references to variables that work? And how to call this function from Main class?

View 1 Replies

ActionScript 2.0 :: Splitting An Array Into Multiple Variables?

Aug 8, 2007

i know how to use arrays in a flash file but i'm not sure if i can split it into multiple from an input text box:

Code:
stop();
getcode = [_root.colorskin, _root.coloreyes, _root.colorwing, _root.eyes, _root.mouth];

[code].....

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved