When I change the swf file to anytime of movie like avi, wmv, mpeg etc. It is not working. I am loading xml files, images and videos in that swf. which file format can do this for changing swf to any movie type file.
View 1 Replies I made a flash-file that will load a file externaly (http://.../locus.f4v). When I publish that flash file it renders a locus.swf, locus.index and a SkinOverAllNoFullNoCaption.swf (skin).When I upload everything works fine. But to easily manage all of my video's I can't have them lying arround and would like them in a folder. So I create a folder locusvideos. I change all the links in the html-file to locusvideos/... .swf but it just shows an empty page.so where are all the files at? locus.html (is in the most top folder)
/locusvideos/locus.swf
/locusvideos/SkinOverAllNoFullNoCaption.swf
and the video-file is still on the same place.
convert a SWF file into MPEG?
View 4 RepliesI am trying to convert a flash file into MPEG. The way i'm trying is to convert into AVI then AVI to MPEG. But i don't have good converter. find a converter? from .SWF to MPEG or AVI to MPEG.
View 8 RepliesIn which way can I include a .mpeg or .avi in my clip?
View 1 RepliesI am doing a project for school and I don't have flash their. Is there a simple way to connect to a external flash as file and have that one stream a mpeg video into flash. If so, is there also anyway to add controls.
View 2 RepliesI am doing a project for school and I don't have flash their. Is there a simple way to connect to a external flash as file and have that one stream a mpeg video into flash. If so, is there also anyway to add controls.
View 2 RepliesI've compiled an MTS video into MP4 format using FFMPEG. The video is 2 minutes long.
I want to be able to play the video back but start at 0:15 seconds and end at 0:45 seconds. Effectively I want the playback software to only show 30 seconds of playback available. The software must be a Flash-based application for integration into HTML.
I have been trying to get sIFR 3 rev.436 working on my site but I stuck at publishing the movie. I did everything the instruction had told me to but when I published the movie and double clicked it to test, it failed, the movie was blank with the following error. Someone said the Action Scripts should be in the same folder as the sifr.fla, it was but it didn't help at all.
Scene=Scene 1, layer=code, frame=1, Line 19
The class or interface 'sIFR' could not be loaded.I was puzzled and after hours of looping in the situation I downloaded rev.432 and tested it out. To my delight, everything turned out right and I published the movie successfully!
1)I was able to load an external .swf file into a blank movie clip (A TARGET CLIP WHICH I CREATED using createEmptyMovieClip) 2)Also by placing a button on the stage I was able to remove the movie clip
BUT I WOULD LIKE TO BE ABLE TO KEEP ALL MY CODE IN THE FIRST FRAME. I would like to Remove the Movie without putting the code on the button. But it didn't work.
Here is the code on the button that Does work
[Code]...
i have an flash file, where i am calling script from the ".as" file. this works fine.Inside the flash file there is no code. All the codes is in the ".as" file. that's ok.But when i change the code into the ".as" file. that code doesn't works. To make that code work i have to re hit the "CTRL+ENTER" than that code works.I have changed the classpath also $(LocalData)/Classes.What i am looking for is, once i made an ".as" file, than i edit that ".as" file without opening the fla file. That code should work.
View 6 RepliesI am in the middle of creating a website using Flash CS5. I opened up my .Fla file one day to continue my work but I am no unable to access buttons and movie clips. When creating movie clips or buttons I am unable to get inside them, when I hover my mouse over them there is a white hand icon which never used to be there it was always just a normal mouse icon. I double click to enter inside the buttons/movie clips but nothing happens. This happens to existing movie clips and buttons on the page and even when I create new ones. I really don't wanna have to start this website again.
View 1 RepliesI work with Flash Pro allmost 11 hours per day and every while i get a error which messes up everything. Approximetly i get this after about 2-3 hours withevery project.After i get this error there is no chance to test movies afterwards.I see a fast flash of the loader window but it dissapears so fast i cant even really see if it is loader.
View 1 RepliesI've built a code to cyclically move a scene on the bottom of my stage; I've done this to make a slowing-and-stop-easing effect at anytime the command will arrive. The entire scene mc is _x long something like 6000 px. The whole code goes in this way:
1) importing on the stage (with attachMovie) a mc with this code inside:
onClipEvent(enterFrame) {
_parent._parent.fondo_mc._x -= countermovement;
if (_parent._parent.fondo_mc._x <= -5800) {[code].....
The code goes right, but I need to improve it.Now there is just a variable, I tought to use two vars to implement the whole code in a setInterval, but maybe it's unuseful, and actually I can't use it in the right way.
Second issue: actually when slowAndStop function is called the scene slow too fast, if I take it to 15 it slow better but the scene is running too fast...
The best would be that the scene slow down and stop following: A) a temporal variable (and I can try to implement it with setInterval, that for istance is a cycle)
B) an indipendent moving variable, so that on one side I set the speed, on the other side I set the slow-and-stop in a matter of time with countermovement.I also tried to use a second variable:
var counter:Number = 15;
// set the _x increment
var countermovement:Number = counter/2;
but the scene slow and goes backward a bit
how to change the bg_color of a movie clip dynamically through a xml file.
I can pull the information needed just fine but I can not get setRGB to recognize a variable name.
ie: newColor = new Color(bg_mc);
newColor.setRGB(bg_color);
bg_color = 0x102892;
[code]....
can any body tell me how to change the background of a movie through external text file
View 8 RepliesI am n00b with the flash. I had a swf and i decomplied it so i got lots of files including actionscripts. However i cant change the actionscripts. The program just doesnt allow me to make a change on it.
I would do it with notepad but there are so many actionscripts i donno which one has the code i need. Its actually very complicated. It made me sick.I just need to change some paths in actionscripts.
I was given a flash file for the header of a template site, but I am unable to change the movie/scene. No matter what changes I make when I test scene/movie I am not seeing any changes I have made. Even if I hide all layers and save when I test the scene nothing has changed. the only flash work I've done is making a banner that fades to different images.
View 2 RepliesI want to know if there is a method to change swf to gif. I tried to import swf file into stage or library under Adobe Flash CS4 Professional,and export it to gif,but I can't import swf.How to import swf? Is there a free software to change swf to gif?
View 1 RepliesDrag and drop game. I'd like the instance to tint red when rolled over after it's been successfully dropped. I'd also like to play a sound file when clicked after successful drop. Here's the code:
ActionScript Code:
addEventListener("dropped", dropper);
function dropper(e:Event):void {
[code]....
For some reason I am unable to create a FLV file from a MP4 file with high bitrate. I even created a custom setting and specified bitrate as 2500 but the output file is always around 775.
View 9 Replieshow to change a few flash settings. My website is done except for these few minor changes.
1) There are two flash files, a menu and a header, in the menu when the page paods the buttons are white and turn orange when you scroll over them. Id simply like them orange when the page loads and then to turn white when you scroll over them. I can figure out how to get the scroll over to white but not the first part to getting the load orange.
2) In the header file there are several pics. Beside the pics there are scroll over buttons. Id like the first button, that says domestic contract, open when the page loads.
I adopted and existing site, and am making some changes.
Publish settings:
Flash 8
Actionscript 2
A seperate movieclip named page4 shows in the library to have 6 uses. On the clip are two text boxes both static and one has a movieclip button overlayed. Selecting any of the three changes the propery panel for allowing editing. However. Even though I can see the reference point (the cross) of the movieclip page4, I can find no way to get flash (CS5) to show me the properties to allow giving it an instance.
i have created a character.as class that links to an object sitting on the stage.
This class i have initialize var name;
i have created a button that uses on(release){}
the problem im having is, my button does not change the value inside the object.
for example:
my object has a variable called 'name' that holds the value "ayumilove"
and the button on the stage (once click and release) would change that name to "123"
i did 2 traces, before and after. the before trace is "ayumilove", and after trace is "123" However, after i click again (the 2nd time) , it still shows "ayumilove" then "123" shouldn't it be "123" and then "123" ? This shows that the name is not renamed, but overwrite back by the default value in the object.
am trying to export/publish a swf of a dress up game I made so I can put it in Dreamweaver and upload it to my site but I keep getting this error message:"Error Creating Flash Movie File: Be sure the destination file is not locked or on a locked drive. Also, check that the file name is not too long".I am also unable to test the movie, it gives me the same error message.
View 3 RepliesI have a flash CS3 file. We have saved it out as an MOV. How can I:
A. Save the file out as a MPEG-2 instead?
OR
B. Convert the file from an MOV to an MPEG-2? Preferably, with a free solution.
What is the easiest way to convert an SWF (or FLA for that matter) to a standard video format like MPEG2 or AVI?
I've tried a couple programs I found on a google search, but none of them seem to work correctly.
I need to convert a SWF to MPEG format wich is the best application for this job ? I need something with good quality.
View 5 RepliesI have a file with 12 roll over buttons that make a sound on roll over, but I'm unable to change the volume to lets say .5.
View 0 Repliesvar Xpos:Number = 110;
var Ypos:Number = 180;
var swf:MovieClip;
[code]....