I am building a Flex with AS3 application. I am getting a runtime fault on the constructor that declares: public var assetss:Array = new Array;
The fault is:[Fault] exception, information=undefined
Code:
package{
import mx.core.BitmapAsset;
import flash.display.Bitmap
public class colorstim {
public var assets:Array = new Array;
public var imgobj0:Object = new Object;
[Code] .....
Just wondering if anyone knows of a method to build a mask at runtime. The mask may not be entirely dynamic (i.e. there may be an existing movieclip that the new components will be merged with).
View 3 RepliesFlex HTTPService faults end up wrapped in a fault object that seems to obscure the actual returned text. Right now, I return a custom 400/409 error response to service clients that contains useful information about the cause of the error, which I'd like to have displayed to that client.
How can I, given a fault event, get the actual text of the HTTP error response?
When i run it in Flash Builder (debug mode) the remote object called successfully. but whenever i build the application (AIR application), then the remote object will return no result nor fault, the busy cursor is showing about 3 seconds. then no clue at all. how to get advance fault or something than regular fault event or result event? or anyone have the same experience?
UPDATE: Actually it was failed only for ONE service method, for other method (some of them took longer time to call) the service call is work fine. CASE SOLVED So the problem was not on the service call, but on my result conversion that cause the advanced datagrid failed to render.
According to Cairngorm architecture, we always have a fault handler in every command class for each service.How we can create a single Class for handling Fault handler event for all the services.
View 2 RepliesI am working on a flex application which communicates with a Rails backened.When i request for some data, It sends back xml feed.
In some cases, if given parameters are not valid, then rails return an error feed with status code = 422 as following email is wrong
But I dont get this feed in FaultEvent of Flex, How could i read error feed?
On my website chrisdthomas.co.uk I have installed dewplayer to play some mp3 files. A folder called portfolio contains the sounds.html file that generates the relevant webpage. Within this folder is a folder called sounds which contains the files dewplayer-playlist.swf and playlist.xml, along with a folder called mp3s which contains the mp3 files.On my computer it works perfectly. When I upload it half loads and says "XML Error".If I download it back to my computer it works perfectly again!
View 1 RepliesI've been experiencing a supposed fault with CS3's autoformatting.It completely ignores my selected option of putting spaces around operators, and when assigning variables a class:
Code:
var theText = new TextField ();
it turns it into
Code:
var theText=new TextField ;
erasing the parenthesis... this is definitely not normal.When I delete the spaces that it creates, then autoformat it, it recreates the two spaces...
i have been having recurring crashes, Windows Applications Event View log indicating that Flash exe failed, see below:
Faulting application name: Flash.exe, version: 11.5.1.349, time stamp: 0x4e5bcaea
Faulting module name: dvaui.dll, version: 5.0.0.19847, time stamp: 0x4d79ee6c
Exception code: 0xc0000005
Fault offset: 0x0015e8f8
Faulting process id: 0x1c4c
[Code]...
I'm loading .swf files into a WebView directly using webView.loadUrl("http:url....);. It works perfectly in the vast majority of cases.When loading a few specific swf files on certain devices, though, shortly after the Flash media begins to be displayed, my app closes with a Signal 11 fault caused by the Flash Player plugin. Example LogCat dump here. No Exception is thrown. The same thing happens if I load those files into the xScope browser.When loading them into Dolphin Browser or the default Android Browser, however, shortly after the media begins to be displayed, the following is printed to LogCat:
05-31 18:13:15.498: DEBUG/FONT(9183): WARNING: **************************** Detect FLEngine error 1 ****************************
05-31 18:13:15.558: DEBUG/(9183): ---------------------------------------------------------------> call AudioTrack stop()
and an error icon is displayed on-screen: No SIGSEGV fault occurs, and the browser is not terminated.how I could do the exact same thing? Prevent the Flash Player plugin from causing the SIGSEGV fault, and simply handle the error myself, without the app being terminated?
I have implemented some utility classes in Flex that I want to use in multiple AIR projects. I have created a swc which contain these classes. I am working on a Linux machine and do not have FlashBuilder. So I am using the compc and mxmlc command line SDK tools. My problem is that I have not been able to find a way to specify the swc when building the standalone project. A tutorial suggested the following command: mxmlc -load-config /opt/flex/4.1.0/frameworks/air-config.xml -library-path=/path/to/utility.swc hello.mxml. However, using that gives me the error hello.mxml: Error: Unable to locate specified base class 'mx.core.WindowedApplication' for component class 'hello'. Everything works fine if I move all code from the swc to a single monolithic pro ject. The code for the standalone project is:
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" windowComplete="completeHandler();">
[Code].....
This maybe a bit of a 'wide' question, but am putting together a brief overview of a new system I'm proposing at work. It will be a POS style system, that does quotes and invoices + crm for our work enviroment across 100 + locations.
It will communicate with server via the Internet. Flex / Air feature set (offline SQL is Internet goes down, Rich communications, rich client environment etc), the fact that we run Macs + PC makes it looks like a great choice. I know HTML 5 has offline SQL and stuff, but flex feature set is way more comprehensive / usable etc..Is anyone doing any big corporate Flex / Air projects that need to last a long time? Or are you pushing HTML and its new technologies to provide a more safe investment.
I have a swf which embeds around 40 various png and fxg objects using the embed metatag... eg.:
public class OneOfMyEbeddedAssets
{
[Embed(source = "./assets/OneOfMyEbeddedAssets.png")]
[code].....
I know I can use a combination of ant & flex ant tasks for automating builds. However, I'm unclear on how to compile all the mxml and actionscript files of an app. For example, does the build file below compile just the Main.xml file or all files in the app?
[Code]...
Using the Flex ant task to build our application results in the "Flex Data Visualization Trial" watermark being displayed in our charts. We have professional licenses for flex builder but do not know how to tell the ant task about these.
View 1 RepliesI've been trying to set up a nice environment on Flex 4 and Flash Builder 4 by using the "code behind" philosophy on my Application tag. This has given me a silly amount of problems!
[Code]...
In Flex ActionScript, a new object can be instantiated via the parameterless constructor with or without (). Example: var array:ArrayCollection = new ArrayCollection()
var array:ArrayCollection = new ArrayCollection
Is there a difference between the two? Is one preferred over the other?
I am creating an AIR app. In this app there's a need to copy a folder from a fixed known localtion C:xyz to app:/. I would like to know how can I do this copying before compilation/build so that they get packaged when I run the 'Export Release Build'
View 1 RepliesI would like to build a flex library project automatically instead of the current process, which involves one of our developers compiling it on his machine and then us checking in the resulting .swc file. It's gross. I am coming at this from the perspective of a java developer, so I'm having a hard time getting the hang of the compilation tools provided in the Flex Builder 3 application, but here's what I already have: I have created an ant file that loads the ant task library correctly, and can therefore execute <mxmlc/> and <compc/> tasks.
I have located the source code that I need to build, and know what sort of .swc I want to end up with. What I want is an ant script that will do the equivalent of these steps: We build all sources (actionscript and MXML) and assets in the project into an swc file. The library.swf file is extracted and optimized
[Code]...
I have Flex Builder Professional Ver 3 (Built with Eclipse) version.
I need to build an application with charts. The problem is that there are no charting components to be seen. There is no datavisualization.swc file in the libs folder.
First, here's what I want to do:
* Compile my library code into a SWC * Do not staticly link the Flex framework
At first, I tried just setting up a Flex module, clicking the "library" and "use framework as an RSL" buttons. This however doesn't compile any of my code into the SWC, and it basically just compiles a new SWC of the entire Flex framework, all resources and classes included.
Then, I managed to get my classes into the build using a custom compiler config, but it still includes the few Flex classes that I reference in my library code.
Finally, I figured I could use the custom flex-config.xml file, remove the parent reference to the library using <library-path append="false"></library-path> and then using a custom command line parameter (and also from ant), add -compiler.external-library-path references to the SDK and PlayerGlobal.swc. This should probably work, but Idea won't let me set command line parameters when I'm using a custom config file
There is an ongoing argument on the web right now about the "openness" of the iPhone OS and Adobe Flash platforms. Adobe's argument is that anyone can build a Flash application without having to worry about being allowed to distribute it.
This made me wonder... is it possible to build and distribute an AIR application without giving any money to Adobe (without violating any licenses, of course)? Are any of these tools free? Are any open-source?
Can I call a function when building an array in Flex 3?
public function gridBuilder(myArray:Array):void {
var i:uint;
for (i=0; i<myArray.length; i++){
[Code]....
MyArray is the result of a remote call to the database. I then prepare the array to be used in a dataGrid. I also want to call a function that provides a grade. Unfortunately, my function appears to be called only once. Is it possible to call a function when you're building an array? see the "Grade:" bit.
I need to deploy my project automatically using cruise Control .
View 1 RepliesI am building a flex project manually in eclipse and want to know which heap is used during this process:The heap used to run eclipse mentioned in eclipse.ini or the JRE heap specified within the eclipse?
View 1 RepliesIve been trying to write my first Blackberry Adobe Flex application but get the following errors:
1172: Definition mx.controls:Label could not be found.
I wanted to check if there is a easy way to build an arrow for a line... currently I am trying to draw a triangle at end of the line- doable but a load of geometry to handle as the line could be at any angle and- anything build-in available?
View 3 RepliesI have several Flex Builder projects which depend on each other (both libraries and "applications",projects which generate an SWF), and want to compile them from commandline. I know there is the fb.exportReleaseBuild ant-Task, but unfortunately it doesn't work on Linux and only comes with Flex Builder.
Is there any other way to build those projects, including their dependencies, from commandline?
I have an Actionscript 3.0 app that I've made using a trial copy of Adobe Flash Builder 4.5.
Now, Flash Builder license has expired. Is there any way to compile my code without using Flash Builder?
I read somewhere that there is a free compiler to do that. What about Flex? Is free? I can use my actionscript code with Flex
I am coming from flash to flashbuilder I have a directory, AS3_classes_dir, on my computer that stores all of my classes, including my greensock and papervision packages. In every flash app that I make I include that directory in the Source Path, so that I can import whatever I may need. Compiling in flash (using ctrl/enter) takes very little time; only the classes that are specifically imported are compiled.So today I did that in flashbuilder, included AS3_classes_dir via Flex Build Path/Source Path ... but now the compile time are a couple of minutes, even though I am not even importing ANY of the classes from within.
View 2 Replies