Just a quick question about the Timer class of Flex 4. I have a timer object with a set repeatCount. At the end of the set number of cycles, the TIMER_COMPLETE event is triggered and the timer.running changes to false. Now I can call the timer.start() function again. My question is that at this stage, does it also set the repeatCount property back to zero. Or does one have to explicitly call the timer.reset() function.
View 1 RepliesIs it possible to make a count up timer (from a specific date, birthday for exemple) from the count down timer ?
I've tried to change a few things (I'm very bad in programming) but I can't get the date properly.
If not, do somebody know a count up timer (.fla) that I can use ?
I'm trying to broaden my horizons with it and so I'm trying to do an update of a quiz program my employer has. Everything has worked well, except for the timer. The button that starts the game has two options, "study" or "exam"; if the study is selected, there is no countdown, just the score keeper. If the exam option is selected, the timer is show (counting up). But, press "Start" and while the quiz begins, the timer, in either case, does not.
I'm going to post the actionscript for the timer that was already there, as well as the start button. I'm hoping someone can explain how this timer is supposed to work and why it's not; and where the disconnect lies in pressing the start button and making it run.The timer is embedded in a movie clip, with two dynamic text boxes, that are for some have no instance name; and actionscript spread out over several frames.Frame 1:
Minutes = "00";
Seconds = "00";
Centiseconds = "00";
[code]....
I have a ActionScript 3.0 project and I have a timer that is running on 1000 millisecond intervals. I would like to delay this timer for 1500 milliseconds perform an action and start the timer again after the delay. I thought I could do this easily, but I'm having trouble, would it be better to stop the timer and perform the action and then listen for the action to be completed to start the timer again?
View 1 RepliesI've got a game going where portals are randomly placed across the map every X seconds.However, I can't figure out how to stop the portals from spawning on top of each other. I know how to easily do the collision, and check if they're too close to each other.Pretty much what I do is create the portal object, then randomly assign it X and Y values. Then, I do a for loop that loops through all the portals in the portals array, check THEIR X and Y value, checks to see if they're too close...then what? I can't just go "okay, it's too close" and randomly assign it new X and Y values, otherwise it could be on top of ANOTHER portal.What I'm looking for is something that will check the X and Y values of all the portals, then if it is on top of another portal, it will assign new X/Y values. Then, if these are on top, it will do it again. And again, until it gets the job done!
View 2 RepliesThe document doesn't mention anything about this:[URL]..
View 1 Replieshow I could easily add more dates and dynamic text boxes on the stage without stressing the CPU too much. And I'd also like to know how I can convert everything to hours so it only shows everything in hours? Here is the code I have found and adjusted.
[Code].....
I am making a game and i need help. I want to make a timer that counts up and when it goes to the game over screen it will show the values or the time that you stayed alive on the gameover screen.
View 7 RepliesThis is the code I have for a count down timer in days, hours, minutes, and seconds but I would just like a timer that counts up from 0 until what ever number I would like and I would like to be able to control the pace
var targetDate:Date = new Date(2012,3,5,13);
addEventListener(Event.ENTER_FRAME, loop);
function loop(e:Event):void
[code].....
Is it possible to manually set the timer count? Atm i've got a timer that ticks for 30 seconds displaying an image every 10 seconds and I want to make a button that goes directly to the second image when it's clicked.
View 7 Replieshow to make a count down timer ???
View 9 RepliesI want some Script for the Count Down timer of 15 minutes in the end of Timer i need to show another thing any regarding this thing
View 3 RepliesI have 2 timer related questions.
first one, I am using this great Mazoonist timer (5 min countdown) and this is a code:
Code:
function startTimer():void {
timer = new Timer(1000, 300);
timer.addEventListener(TimerEvent.TIMER, countdown);
[Code].....
only stop the timer on it's current time. i tried to use TIMER_COMPLETE instead of .stop(); but it doesnt work.
I made a simple count up timer, it is working just fine but I would like to have the %-sign next to the numbers so it would look as a preorder. But as I add "%" sign to the function, the counting never stops (at 100% any more), and continues counting.
var count:Number = 1;var myTimer:Timer = new Timer(10);
myTimer.addEventListener(TimerEvent.TIMER, countdown);myTimer.start();
function countdown(event:TimerEvent):void{
[Code].....
How do you make a count up timer in flash? I have the custom counter I made in photoshop and I can get it to count up, but not with the dynamic text field I've created in flash, what do I need to do.simpl code:
var startT:Number = 1;
var endT:Number =8000000;
var tf:TextField = this.createTextField('counter', this.getNextHighestDepth(), 10, 10,
[code]....
I have this code for my timer, it counts down alright. BUT it is very buggy it most commonly counts down by 2 when it is meant to count down by one I have even watched my brother play our game and it went fron 20 to 7
Code:
var cur_timer = 180;function timer()
{
if (cur_timer > 0)[code]....
My app is set up to pause the animation when the mouse is pressed down by calling Timer.stop(). While the mouse is pressed, the user can draw on the screen by dragging the mouse. When the mouse is released, the animation starts again with Timer.start() and is based off what the user draws.However, after I let the animation run for a while the app gets so slow that I can't even drag to draw when the timer is not calling the animation update without the drawing skipping hundreds of pixels at a time.
ActionScript Code:
package {
import flash.display.Sprite;
[code].....
Code for timer:
var oneSecTimer:Timer = new Timer (1000,60);
oneSecTimer.start();
oneSecTimer.addEventListener(TimerEvent.TIMER , timerListener );
oneSecTimer.addEventListener(TimerEvent.TIMER_COMPLETE , onTimerComplete );
function timerListener (event:TimerEvent):void {
secs.text.text = oneSecTimer;
} function onTimerComplete (event:TimerEvent):void {
gotoAndStop(5);
days=days+1;
}
When I run the movieclip I get, where the timer is supposed to be showing the countdown, a "[object timer]" message instead.
I want to create a dynamic text box. set a (start) and (stop) time. have the time change along with each frame. its a blank movie with 150 frames. this is in frame 1.
[Code]....
Any tutorials or source files for the timer. Just a simple timer that counts down by minutes and seconds for 10 minutes. The closest I got are a bunch of codes that I'm not really good at translating. Just a simple timer that will trigger the end quiz page when time is up.
View 3 RepliesI use an UILoader with a .swf as source. The problem is that the swf embeded in the UILoader start at 20% of UILoader Progress Loading.Is it a bug ? I'm pretty sure my loader should not show anything until 100% complete.PS : I have spent 3 hours before post this. All uiloader i have seen on the web do display at 100% loaded.
View 9 RepliesI have a function that calculates how many characters remaining the user can type, but I don't know why it only starts counting from the 2nd characters. Means at the end I will able to type an extra character from the maximum amount I set.[code]...
View 2 RepliesI've created a timer to count elapsed time on a flash player of mine, I can't figure out how to control it though. For example I need the pause/ play buttons to (you guessed it) pause and continue the count.The dynamic text field that keeps count is simply called "count" and the pause button is btn_pause and play button is btn_play
Code below.
start_time = getTimer();
countdown = 7200000;[code].....
I need a timer script to place on a keyframe that count 5 seconds then goto next frame.
View 10 Replieswat should i write for the as to recount the number of btn have been clicked? cos this is used in a replay btn. i have btn for user to click n count how many time the btn have been clicked n show out the match image, so now another btn (replay)to let the user to see again the image so what should i write in the replay btn's as to let the count of the times of btn have been clicked start. cos what i done now it can't start to count again it just plus the number i have clicked for the btn.
Let's say if the image just only have 3 so tat when i finish clicked 3 times all the image ady showed n now i click the replay btn but wat i get is wrong cos in the output box it still counting the number i have been click for the btn so it show 4,5,. it can't start count again.
The preloader I usually use executes an addChild(loadedMovie)statement in response to an Event.COMPLETE event from the loaded swf's contentLoaderInfo object (a common approach, I believe.) The problem with this (as many of us know) is that the loaded swf starts running before the Event.COMPLETE event gets thrown, which means that once the child is added, it is already a few frames into its timeline. What I need is a way for the loaded swf not to start playing til its COMPLETE event gets thrown.
View 5 RepliesI have a large SWF flash file being loaded by a parent SWF and I would like to start playing the film being loaded, let's say, when it is 50% completed. According to my expected user's bandwidth and the size of my film I will calculate the best moment to do that (the film could be 20%, 30% or 50% loaded). I want to leave users waiting the minimum and I don't need to wait until my flash is 100%.
Ok, that said, here is the problem. I am in ActionScript 3. I have one film loading another and I want to anticipate the loaded film start. I have an onProgressHandler(mProgress:ProgressEvent) function (with listener launched by ProgressEvent.PROGRESS) and I have a regular onLoadComplete(e:Event) function (with listener launched by Event.COMPLETE). I could check for 20% completed during my regular onProgressHandler. But then, when I have identified this point has been reached, how can I anticipate the launching of the film? I mean, my Event.COMPLETE handler passes the e:Event and I can use e.target to get the loaded object into my film. But what happens if I want to start that process before it is complete? I cannot pass this e:Event because the COMPLETE handler hasn't been launched yet...
One important thing to say. The film that is loading is almost empty. It is very light. The heavy film is the one being loaded and I want to attach that film being loaded to a movie clip in my film before it has completed loading.
I need to make a function (number function) repeat, so that the percentage in the progress bar can change over time, I'm currently using the setInterval(), to make the function repeat, but nothing happens.
View 9 RepliesI have a timer set up like this:
[code]...
The problem is I cant figure out how to stop it or reset it after it goes to the next frame.
I have a .fla where the timeline is controlled by a timer located on frame 1 in a layer named "Actions".Essentially every seven seconds it advances to the next frame by way of the variable nextItem. There are 9 frames, then it loops back to 1. This all works fine.The problem lies in starting and stopping the timer ONLY AFTER the movie has looped back to frame 1. Not only does it not stop on MOUSE_MOVE but then on MOUSE_LEAVE the timer seems to get faster .. or jump through the frames.
Code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, timerOff);
stage.addEventListener(Event.MOUSE_LEAVE, timerOn);[code]...