How do I know that a stream is playing a live stream or from the VOD archive when DVR is enabled? I tried isPlayingLive, it always returns "true", even if it is playing from the archive
View 1 RepliesI would like to know if there is a solution available that allows me to plug 2 HDV cameras into a laptop and live switch between the 2 cameras while uploading the live stream via adobe flash media live encoder to the adobe streaming server? the scenario is I want to offer live streaming of corporate seminars that I normally shoot with 2 cameras.
View 1 RepliesI have Flash Media Streaming Server 3.5 (not Interactive) running on RHEL5.5 x86_64 Linux.All is working well, however how do I prevent unauthorized access to connecting to the live stream and streaming content?How can I setup the server to require a user and password to stream live media to the server?I am new to this product and I have been reading some documentation but I have not found a clear cut answer on how to force a username and password to connect to the server to stream live content only.I am using the Adobe FMS Apache install, what files need changing?[code]I want to lock down a person from connecting to the server on the public internet and starting a live stream?Can this be done with a user name and password?
View 13 RepliesI'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I am working on streaming programs through "Adobe flash Media Live encoder" in my website.The steps that i done for streaming is
* Installed Adobe flash media live encoder
* In the FMS URL entered as " rtmp://myserver ip/live "
* In stream given as "livestream"
* when i click connect the follwing error is displaying " Invalid primary FMSURL "
The website i am going to implement is [url]... which is done using PHP. Is there anything i have to do in coding to connect the media server.
when i try to live stream with FMS! I can stream video with Flash media live encoder to the server but when i create the player to recieve the livestream from server,i can not recieve the live stream,can anyone give me a step by step tutorial of how to do it?
View 1 RepliesI have a FMS 4.5 with (License) and is set up and running fine, now I want to stream Live to the IOS Devices but no luck. I have a web page for test purpose with the video src tags to: URL... and in the server I have a livestream.m3u8 pointing to the same URL..., Now the Encoder have the AAC plugin and all the presets like it shut but when I go to see it in my IPad 2 this is how it looks.
View 11 RepliesI m a begginer with FMS. I have a licenced version of FMS and I want to stream a live video from the Localhost or another machine with camera. And then then I should broadcast it to many clients. I don't know how to begin
View 12 RepliesI'm new to Adobe Flash and I'm just trying out the Flashe Media Server 4.5 to stream live video on a local machine. I'm using a FLME 3.2 to capture the video from my digital camera, which works fine, and I can connect to the server with no worries as well. But I have issues streaming the content in the Sample Video Player that comes with the server.
[Code]....
I've also tried playing some sample videos on it. it even refuses to play those. What could be the problem??
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesOne server - is streaming server with Flash Media Interactive Server 3.5that host the application with asc files in FMS application directory.Second server - is the IIS web server that host thehtml,aspx,swf etc.. files.So basically i heve swf file on one server that have to connect to live streaming via rtmp on different server with different ip address.I did not find any clear explanation on this crossdomain rmtp issue.ys only HTTP can use crossdomain.xml policy filebut not rmtp.So what policy security procedure need to be done in order to enableswf file hosted on one server to connect and show rmtp live cam broadcasting from another server?
View 2 RepliesI could contact about building a custom live Flash media encoder for our website. We have a database for authentication and a list of upcoming events with stream information (FMS URL and Stream Name) that we want to automate into an encoder. Currently we have our customers use Flash Media Live Encoder and copy/paste the values into the encoder, but would prefer a solution that is more tightly integrated with our site
View 4 RepliesHas there been any further discussion regarding restricting who can stream to FMSS (not FMIS or the development version).
I found this article, but I don't know if this was ever fully resolved:
[URL]
I don't want just anyone to connect to my server to stream live. I want to restrict by IP address, authentication, or any other means.
'URL missing from Media tag' on FMS4.5 HTTP Live Stream playback.I have spent a whole day trying in vain to publish f4m live http streams from FMLE using FMS 4.5, and almost everything I try results in the error .The F4M document contains errors URL missing from Media tag...in both Flash Media Playback and the fms videoPlayer app.Other people seem to have seen this and solved it, but I've found nothing that helps. I have tried to publish a single stream, and with multiple bitrates. For the latter, I followed the Adobe video tutorial as follows:
Multiple bitrate live
================
I'm publishing 3 streams from FMLE, using
FMS URL: rtmp://[serveraddress]/livepkgr[code]..........
I am using Flash media live encoder 3.1 to broadcast to flash media server.
Its is possible place a image logo with the media live encoder??? How i can do this?? I like that my broadcaste have a image logo.
I have installed the Authentication Add-In on a FMS 3.5.5 Development version, running Windows 2008 Server.I can easily get to the users.exe command prompt and add users with no problem.BUT, when I open the Flash Media Live Encoder and go to enter a username/password when connecting to the server, I keep getting "User Not Found".I've went back several times using users.exe and tested for my user credentials and it always states that the user is there.
View 1 RepliesWhen using Adobe Flash Media Live Encoder, it doesn't seem to recognize my system speakers, so I can't record system audio.
View 1 RepliesBeside Flash Media Encoder, can I use a live stream from Windows Media Services?We have live streaming with Windows Media Server, but now want also offer to mobile devices, but we dont re-encode the entire streams (tvs) again, it would be great if we can use a stream from windows to tunnel it to flash media server.
View 1 RepliesAre you preserved only in the local though provide the recording function in FME?It will be able to record directly in FMS.
Does the recorded image preserve the image from the camera directly or is what has flowed by way of FMS preserved?
i have got a video application using FLVPLAYBACK component. isLive=true, rtmp://application/live/demo Flash media live encoder 3 the instance is demo. Everything works fine.I need to know when Flash Media Live Encoder 3 is off-line. how i can do that FLVPLAYBACK detect this action and the client is disconnected. i try using buffering but i don't know, how take a time for it. for example is 5sec in buffering do another action or is there some function that detects when there is off-line?
View 2 RepliesThis is sort of a follow up to my previous post, asking about streaming through FMS to Apple and Android.Android and Blackberry devices require that the audio component of video streams be encoded using AAC. Right now I'm telling my customers to buy the MainConcept AAC plugin, or to buy VidBlaster or Wirecast. Can anyone from Adobe comment on when Adobe might release a version of FMLE that includes AAC?
View 6 Repliesi have a small LAN of about 8 computers all of which are running windows 7. I have installed FMS and XAMPP webserver on one of the machines. I want to stream live from one PC to all the other PCs on the LAN. I have a webpage with jwplayer embedded in it on my XAMPP webserver that is able to see the live stream when i start it locally. I mean the live stream works fine on the machine with the servers on it. But when i want to view the live stream from another machine in the LAN by accessing the webpage that has the jwpalyer from another machine, The jwplayer returns "server not found:rtmp://192.168.10.1/live" error. I was thinking that maybe a firewall is blocking the 1935 port but i have turned off the firewall of every PC on the LAN. I have unistalled any antivirus program on all the PCs. But i still get the same error when i try to access the live stream from another PC on the LAN.When i run netstat -a -n|find ":1935" i get 192.168.10.2:49184 192.168.10.1:1935 SYN_SENT and i think the request for the stream is sent but the conection is rejected.
This is the code for the webpage with jwplayer embedded in it. maybe it:
<html>head> <title>JW FLV Media Player</title> <script type="text/JavaScript" src="swfobject.js"></script>
[code].....
Somebody I know can't watch because they have a proxy server.The nc.connect() call to get the live stream fails because it goes direct from AS3 to FMS and doesn't go through the proxy server.
View 1 RepliesI use FMIE and FMLE.how can i do save to file Live Streaming in server installed fms, not local system ?
View 1 RepliesFinding faults in my reasoning, or expanding the discussion further. We are benchmarking FMS 3.5.x for live dynamic streaming and we have run across an issue. When throttling the client from a high bandwidth (1500kbps) to a low bandwidth (325kbps) via a bandwidth shaper (a physical firewall) it takes a very long (real-) time for the client to see the new stream-quality.
During the investigation of this issue we have narrowed this down to:
1. when transition is requested from client, the client-side buffer is 1/2 i.e. 4-5seconds.
2. if transition is request on a client with unlimited bandwidth, it takes about 6 seconds for the server to process, find an acceptable switching position and send a "transition.complete" event.
3. on the throttled client however, this event takes much longer.
[Code]...
My rtmp client connects to the server ok and rtmp data flowing ok for about 4hours, in the wireshark trace I can see that the server just stops sending data roughly after 4hours. The server version is 3.5.1, and I also try it on a 4.0 server the data stops coming from the server as well after 5+hours. There are no errors or any indication of session disconneciton in the diagnostic logs. I have also looked thru the settings in applicaiton.xml and server.xml I just don't see any obviious reason for the issue. I do send rtmp Acknowledgement to server after the client receives "window size" bytes, and the client sends ping response to server.
View 1 RepliesWe purchased Flash Media Streaming Server Interactive edition in order to have the security featuers of not allowing unauthorized connections streaming live content to the server. Is there a document with procedures that details how to make this happen, the allowedHTMLdomains.txt does not work when you place in IP ranges that you do not want connecting. I need some help just to figure out a way to keep someoen from connecting to the server and not streaming live content. Has anyone configured this in Linux because the documentation is mainly for Windows. Any help/advice would be great since this seems to be a common problem for anyone who runs Linux.
View 10 RepliesDoes anyone know if this is possible I have an FMS server in our production enviroment that contains multiple vHosts, at the moment I have one edge server setup for each host based on the comment at the bottom of this entry:[URL]
View 1 Repliesis there a possibility of authentication FMLE users to the server on the FMSS? Or such a possibility exists only in the FMIS? Actually, somebody had to deal with this problem? Decide whether it?
View 1 RepliesNo I have installed fms4.5, but I can't find good docs how to set something like this up. In Learning section I saw a lesson, but this one isn't ready.So I want to publish using flash and the subscribers to the livestream can be iPhones or Browsers.
View 13 Replies