Professional :: Adding Sound To Flash Movies?

Mar 29, 2011

When I tried to import music to flash animations I have created, I received error message that: One or more files were not imported because there were problems reading them.
 
The platform: Mac AA audio file Encoded with iTunes 10.1.2, Quick Time 7.6.6
  
Is it because of the audio file format that music cannot be imported? If so, how can i convert it to the compatible format?

View 5 Replies


Similar Posts:


ActionScript 1/2 :: Sound Linkage When Loading Movies Into Movies?

Jan 16, 2007

I have an intro.swf file that is basically a movie with sound that is exported for actionscript but not exported in the first frame. I just stuck it in a movie on my timeline and it works great and the preloader works because it doesn't load the sound before the preloader. I use :

musicSound = new Sound();
musicSound.attachSound("music");
musicSound.start();
to play the sound in intro.swf.

However, now this intro.swf gets loaded into an index.swf and everything works fine and the sound plays as long as I have the sound included in BOTH the intro.swf and the index.swf and the sound is exported on the first frame in the index.swf. I was hoping I could remove the sound entirely from my index.swf since it already loads into the intro but so far

View 9 Replies

IDE :: Creating Mini Product Movies In Flash Using Sound Recordings?

May 3, 2010

I have been creating mini product movies in Flash using sound recordings, key frames, and tweens. This is the 5th in the series, and just NOW I'm having problems.I had my frame rate set to 30fps with one long sound bite, about 2.5 minutes. Everything looked fine on my end, but when I loaded it into a landing page in IE, everything was out of sync, but only on other people's computers. It still looked fine to me.

I compressed the sound file more, which helped some, but did not aleviate the entire problem. I noticed the frame rate when I did a quick preview (just pressed enter) would fluctuate from the 30 fps all the way to 9 fps.I then cut the sound bite up into 13 segments,shortened the tweens, and reduced the frame rate to 18fps. In development and in preview, it looked fine. However, when I put it into the landing page, the animation was way too fast for the sound and the sound bites looped.

View 3 Replies

Actionscript 3.0 :: Sound Event Listeners - Load Some Of Flash Movies A Bit Faster

Apr 16, 2010

I am trying to load some of my Flash Movies abit faster. I had read somewhere that i should use certain commands to bring the sounds out of the library after the SWF or page is loaded. I think i am suppsed to use Event listeners or call on the sounds somehow?? Does anyone understand what i am saying OR have any tutorials or links to tutorials that i can look at with regards to calling sounds?

View 1 Replies

ActionScript 1/2 :: Sound Control Adding Text Into The Linkage Field But Still Sound Doesn't Work

Jan 21, 2010

How to import sound with AS? Cuz i have tried it and my sound just wount play. Can you explain me where my sound should be and what is the as code for importing cuz i use

mysound = new Sound();
mysound.attachSound("SoundOn");
mysound.start();

and this SoundON from where i get it, i try to add linkage to the sound file but in CS4 i cant find the option;. I do it from the library, adding text into the linkage field but still my sound doesn't want to play?

View 15 Replies

Professional :: Flash CS4 On Mac OS X - Cannot Publish Movies

Aug 3, 2009

Any movie whatsover (i.e. any file in any location on my drive) cannot be published (including test movie via Command-Enter) because I get this error:
"Error creating SWF movie file. Be sure the destination file is not locked or on a locked drive. Also, check that the file name is not too long."

The file name isn't too long, and I am logged in as an administrator on the machine. All folders I have tried to publish to are unlocked and I have read/write priveliges to them. This is a new install of CS4 and has been updated to the very latest version (and it didn't work before the update, not does it work after). This is NOT to do with my specific permissions. This is a clean install of Flash CS4 Professional on a very new Macbook Pro running OS 10.5.7.

View 19 Replies

Professional :: Can't Run/test Movies In Flash

Jul 24, 2011

I'm running Flash CS5 on a Mac (yes I've got Adobe running).  However, when I press Cmd and Rtn I get the followng error message:  "Error opening URL [URL] how I can run movies in Flash?

View 20 Replies

Actionscript 2.0 :: Adding Sound To A Custom Flash Cursor?

Jan 16, 2009

I made a movie clip button, which is a custom cursor, and i want to know if it's possible to add a clicking sound into it. Or is there any way for a sound to be played everytime the custom cursor is in the clicking state??

View 2 Replies

Professional :: Loading/Caching Flash Movies?

Feb 6, 2010

Using Actionscript 2, I'm a bit new to all the scripting stuff.I have a loader loading a couple of flash movies like this:loadMovieNum("sound.swf", 1);loadMovieNum("logo.swf", 2);loadMovieNum("mainmenus.swf", 3);Those 3 movies I need to go to the main section of the site. However, I would like the loader to also load the remaining movies needed to further navigate the site, but without displaying them now  Kind of like 'caching' the rest of the site, so when the access is needed, there's no load time.

View 9 Replies

Flash :: Professional - Works But Movies Never Load

Aug 18, 2011

I created a simple Flash app that shows a menu on the side with 2 movie choices. Each movie choice is supposed to play a different movie. The whole thing works just fine on my local machine but when I upload to the test server, the movies never start. Near as I can tell the SWF loads and functions fine but the movies dont work... constant loading bar. Of course, I want them to stream in a YouTube-like fashion. I've fought with this for some time, tried .FLV files directly in DW (no joy there either) so I'm stuck. If I replace the movies with images, the SWF functions just fine. Just can't seem to do the movies.

View 3 Replies

Professional :: Can't Play Flash Movies Locally On Mac?

Oct 26, 2011

Im creating a website and when I test flash content in an html page locally on my mac, I get this annoying message

"Adobe® Flash® Player has stopped a potentially unsafe operation. The following local application on your computer or network: /Users/myname/Documents/Websites/mysite/version 1/site/Scripts/expressInstall.swf

is trying to communicate with this Internet-enabled location:fpdownload.macromedia.com

To let this application communicate with the Internet, click Settings.You must restart this application after changing your settings." 

Ive tried following the settings button and adding "/Users/myname/Documents/Websites' to local storage settings by site but no joy the content still wont play and every time I refresh or test the page I get the same message. I want to add the whole websites directory so I don't get this message again, when testing other sites pages and content.

View 1 Replies

Play Sound File Across Multiple Scenes / Movies?

Jan 18, 2010

Most of my flash movies have been reasonable sizes, but the one I'm working on now is kind of a beast. It's up against the 16000 frame limit, so I'm looking into ways to chop it up. The problem is that I need a way to keep my background music playing across multiple scenes or movies. Is there a way to start a sound file in one movie, and have it continue when another scene is loaded or when a second movie file is loaded with ActionScript?

View 3 Replies

Professional :: Using Movies In Movies?

Apr 9, 2011

I have a small FLA file i created myself. its just a simple mp3 player, pause and stop and a volume slider, thats it.I want to import three instances of this into a bigger movie and have them all available to run at the same time.I need them to be all on the screen at one time (same frames) and I need them each to be able to play a different mp3 The user will not be able to decide which mp3, this is all 'hard coded' into the fla file.So how can I do this and get access to each individual movie's controls?
 
For example when I use the slider on the first player, I only want the volume to change on the first mp3.Would I even have to worry about this in the big file that has all three movies in it?I mean could I just code the volume slider to work right in the mp3 player file and then the bigger movie file will automatically know that when the volume slider is moved, only to affect the voume of the first mp3?if i do it that way, would I have to save out 3 different versions of the mp3 player file. one with '1.mp3', say, hard coded into it, another with '2.mp3' hard coded into it, etc?

View 7 Replies

ActionScript 3.0 :: Adding Movies Dynamically - Recreate Class Works But Shows The Tiles In A Random Order

Oct 4, 2011

0: Its not rocket science, but my surname aint Oppenheimer either so... read on if ou dare.

1: this is my third attempt at mastering OO and flash CS5 so, i hope we can all have a laugh after.

2: In short.. I added a 64x64 tiled movie in flash. Read it out in an array, in a.. well original way(just to see if i could get it to work so stop lauging already), and tried to recreate them using a flash class.
 
2a: The recreate class works but shows the Tiles in a random order, every time a new one?! this is what happens..

[Code]...

View 5 Replies

Flash :: Professional - Website Keeping Image Small And Link Movies Rather Than Embed But Still Slow

May 15, 2011

I have recently launched a site for a client which includes an interactive flash element on the home page but it takes a long time to load (10-30seconds). I have followed advice from others about keeping image small and link movies rather than embed but still slow, the swf file is about 7.9mb which i thought was ok for the size of flash file. Does anyway else know where I have gone wrong whether it be the embedding or some other area.

View 5 Replies

Professional :: Flash Professional Adding Swf Files?

Dec 19, 2011

i am new with adobe flash and i have made 2 swf files that need to link to one main one, i am not sure what the actions should say. so far my programming for my main swf where i want all the other swfs to open from are:
 
var movieLoader:Loader = new Loader();function addMovie(event:Event):void {var movieRequest:URLRequest=new URLRequest ("slideshow.swf");//define a loader to load a movie to the stage//Set the loaders load property to the the var movieRequestmovieLoader.load(movieRequest);//add the image to the stageaddChild(movieLoader);//set its x and y positionsmovieLoader.x=0;movieLoader.y=0;}PictureSlideshow.addEventListener (MouseEvent.MOUSE_DOWN,addMovie);
function activateButtons() {  removeChild(movieLoader); }

[Code]...

View 1 Replies

Professional :: Loading With Sound Only Played Once But Keeping Hover Over Menu Item Sound Intack?

May 21, 2010

I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected.  I only want it to load the one time of entering the site because the audio gets annoying.  Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.

3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.

View 2 Replies

Professional :: Adding Audio In Flash Cs3?

Dec 6, 2011

I am working on a Flash cs3/as2 touch screen enabled kiosk presentation. It has a home page .fla file with an empty movie clip (empty_mc) which movie clips load into from a player .fla file. The player .fla file also has an empty movie clip (empty_mc2) which movie clips load into from a slide .fla file. All I need is to simply have background music playing during the entire presentation, but with volume control, play and stop capabilities. I've used the code shown below, but I get overlapping and echo noise. I've placed the code in the player .fla file in the actions layer. Obviously I have placed the code improperly and would like to know the simplest way to achieve the desired outcome which as I stated above, is to have, aside from the intro., continuous background music.

//VolumeControl Play Stop
bgSound = new Sound(soundLoader);
bgSound.loadSound("sound1", true);[code]....

View 3 Replies

CS3 : Adding Sound To A Button?

Mar 25, 2009

I am having problems with a flash template that I am redesigning. Currently when the movie loads it automatically starts a song in the background. When you click my music navigation link my music page comes up and there are a few links there that I want to add music to. I also need to stop that background music so the song from the link can play.

View 1 Replies

Flash :: Professional - "Pixelated" And Out Of Sync Movies Played

May 12, 2011

Recently i had a problem with my flash player after installing a Windows Update (not sure if its related). Movies played on sites like YouTube became out of sync and pixelated. Im not exactly sure how to explain this, so i uploaded a few pictures of the issue.

[URL] The sound is normal and the only thing affected if the video. If is there is any sudden movement in the video, it will distort the image. using v10.2 and am on Win7 x64. Viewing the video's in Firefox. I had the same issue on my older computer a while back using Vista x64 in both Firefox and IE. The problem on my older computer was resolved by simply restarting the computer. But this time that didnt work. I also tried uninstalling and reinstalling flash, and restarted multiple times

View 1 Replies

Professional :: Sound Free Sound Effects Links?

Jul 29, 2011

Ive stumbled upon a few sites that have free sound FX's but the ones I want which I wuld think are the easiest to get I cant find.I want a sound for when someone clicks the right thing, like a under a sec tiriring or something like when you kill a guy in Leauge of Legends or something like that and also one for when you click the wrong thing like an windows warning ut a little different, yet all the sites and SFX I come across are for everything but those.

View 5 Replies

Flash :: Professional - Cs5 Crashes When Adding Actionscript

Aug 2, 2010

Every time I try and add any kind of action script (2 or 3) to my file, it crashes. I'm using CS5 on Win 7 64-bit.

View 2 Replies

Professional :: Adding Flash To My Company Website?

Apr 17, 2011

i was curious on what i would need to incorparate flash to my business website rather than the service we are using currently. We have noticed that the flash images on our website are having issues loading and getting stuck currectly.My website address is http:[url]... there is flash type images at the top of the page as well as the middle.

View 1 Replies

Professional :: Adding Flash Banner To Website?

Apr 25, 2011

I am having trouble adding a flash banner to my website and I am running php5. I want to use it to help my site sell the new iPad 2. Which product do I need to use to create the flash banner and display photos that I am selling on my auction?

View 1 Replies

Professional :: Adding Audio Controls To Flash CS4?

Feb 23, 2012

To make it, I attached the audio clip to the frame, and used Actionscript 2 to set the frame to stop the audio and manually advance to the next frame. Is there an easy way to show a progressive bar showing the time remaining for the audio playback, and have rewind, stop, start/pause and fast forward?

View 1 Replies

ActionScript 2.0 :: Adding Sound - Doesn't Come Out

Jan 12, 2010

I am doing a game such that when the score++, there is a certain sound. And when the score--, there is another sound. Cause I'm not really sure if this is the correct way. So I have two sound files, linkage "hit" and "miss" The actionscript goes like this on my movie clip:

[Code].....

View 2 Replies

ActionScript 3.0 :: Adding Sound / Mp3 File

Mar 9, 2009

I am very very new to flash...I created a quick little slide show...in which I want to add to add an mp3 file too...the slide show works as such.. Each frame has a picture and next button, so when I test the movie. The pictures are stopped, I click the next button and it
goes to the next frame......pretty straight forward. How do I add sound? I just want the music to start when I open it, and stop when the slide show is over.

The funny thing is...if I insert music into a file with no buttons and just let it stream (and stop on the last frame) it works great, the music plays...Only now that I have a movie with buttons, it doesn't even start. I have been thumbing around the actions panel, but for the most part I'm lost.

View 6 Replies

ActionScript 1/2 :: Adding Sound To A Movie?

Sep 14, 2010

adding a simple sound to a movie with AS?  I'd prefer this, since I already have simple "Roll On", and "Roll Out" script in place.
 
I have imported the sound file. In Properties, under Label, I have named it "tire_squeal". (Also, created a layer within the movie, and dragged the file onto the stage - all done.)  Is this necessary when using Actionscript, or not?
 
The sound file loaded into my Library is named, "tire_screech.wav"
 
I want the sound to load "stopped", then play OnRollOver, and quit OnRollOut. (See previous AS code in string.)

View 7 Replies

ActionScript 3.0 :: Adding Sound To A Spinner?

Feb 28, 2011

so i am making a spinner and i want it to be like a see and say toy. How would i go about adding sound so that when the spinner lands on the picture that the sound will play. I have pictures and I have sounds. how would i do this?

View 2 Replies

ActionScript 2.0 :: Adding Sound To A Movieclip?

Mar 3, 2011

i wan't to make a game where the character jumps when i press a key, but i also wan't to play a "jump" sound when the player press the "jump" key. I tried to use this:

ActionScript Code:
onClipEvent(enterFrame) {
if (Key.isDown(Key.SPACE)) {
kirupaSound = new Sound(this);

[Code].....

But it didn't work very well. When i pressed the "space" key it played the sound like 20 times untill it stopped.. It just continued to play the sound. Preview:megaswf(.)com/serve/1031811

View 8 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved