I am using a flash template that includes a menu bar. However, after I changed the names of the tabs in the menu bar, none of the words show up. Everything else loads correctly (sound, logo, images), but no words on the menu bar. I see them on the actual project, but not when I debug the movie. Where did my words go?
View 6 RepliesI have created a swf (exporting) that have action script that adds childs to the stage. When i export the file and see the result it is all ok. But when i use de same file inside a uiloader the action script seems not to work because de childs doenst apeear in the stage.
View 23 RepliesI have a big problem - I decided to make a website using flash as I am good with photoshop and thought it would be fairly easy to construct in flash using tutorials. All went well except now the website is published, weird things happen. The homepage works fine but when you click on "portfolio" some of the buttons don't appear and when you try the buttons, some images don't appear. Occasionally some of the buttons take you to the wrong place also. When I test the movie in flash, everything works fine so I can't work it out. I am a complete novice so advice will have to be spelt out in black and white.
View 2 RepliesThe keyword is "sometimes".
I recompiled a Flash 8 project in Flash CS3 recently and noticed that some of the sound effects sounded like a painful chippy mess. It sounded like the mp3 bitrate was at the lowest Flash outputs (16kbps). I compiled again, and all the problems went away. Then I compiled again and different sounds went chippy!
Fine, whatever. Maybe it's a glitch between project versions.
This week I built a project from the ground up in Flash CS3 with AS 3.0 . The chippy compression is still there and happens most of the time. Both my global and local compression settings for sound clips are mp3, 160kbps, Stereo.
I've been having a problem with my percentage preloaders today... The script comes directly from this tutorial... and I've used the same script in at least 3 other Flash movies, but this time the Flash movie doesn't run properly, and i get this error:
Originally Posted by Adobe Flash Player 9 A script in this movie is causing Adobe Flash Player 9 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script?" I don't get any compiler error reports.. and the movie runs fine when I test it in Flash, but I get the pop-up error when I try to open the HTML web page with the movie embedded. The Actionscript in frame 1 is:
[Code]...
I'm using the method described in the link to implement a crossbrowser tracking with flash.Everything is working fine when all pieces are together in the same server, but for deploy, i really need to add the swf from our central server, to another different one. Just to simplify this is my html in :
<html>
<head>
<script src="http://dom1/control_cookie.js" type="application/javascript"></script>
[code]......
I have created a flash as2 Expand/Collapse panel, but it doesn't work properly. I have attached the FLA file, c
View 0 RepliesI recompiled a Flash 8 project in Flash CS3 recently and noticed that some of the sound effects sounded like a painful chippy mess. It sounded like the mp3 bitrate was at the lowest Flash outputs (16kbps). I compiled again, and all the problems went away. Then I compiled again and different sounds went chippy!Fine, whatever. Maybe it's a glitch between project versions.
This week I built a project from the ground up in Flash CS3 with AS 3.0 . The chippy compression is still there and happens most of the time. Both my global and local compression settings for sound clips are mp3, 160kbps, Stereo.
Flash 9.0
Mac OS X 10.5.4
I�m in the process of creating a flash intro to my website. The problem is, whenever I preview one of my Mask layers by pressing Ctrl+Enter, the mask effect doesn�t work � it merely shows the masking object.
The puzzling thing for me, which leads me to suggest that the mask should work is that in the normal timeline view, when I lock both the mask and masked layers and press Enter or slide through the frames � the effect works perfectly. On Ctrl+Enter all of my other Masks work fine as well - the one in question has text as the mask content.
It only stops working when I view it as an .swf file or play the movie with Ctrl+Enter. Does anyone know why this is happening, how I can get around it, or whether it will be a problem when published?
I'm relatively new to Flash, and I�m in the process of creating a flash intro to my website. The problem is, whenever I preview one of my Mask layers by pressing Ctrl+Enter, the mask effect doesn�t work � it merely shows the masking object. The puzzling thing for me, which leads me to suggest that the mask should work is that in the normal timeline view, when I lock both the mask and masked layers and press Enter or slide through the frames � the effect works perfectly. On Ctrl+Enter all of my other Masks work fine as well - the one in question has text as the mask content.
It only stops working when I view it as an .swf file or play the movie with Ctrl+Enter. Does anyone know why this is happening, how I can get around it, or whether it will be a problem when published?
im having a problem with sound in the animation. I noticed that sound doesnt sync properly in 24 fps.The sound actually does sync properly when the sound is an event, but when the sound is set to stream, it actually doesnt play properly, and i need my animation to have streaming sound especially for the internet. So for example, if i added a sound effect to start on frame 30, when i play the animation in swf, the sound effect actually starts playing at the wrong frame, in this case, the sound plays before frame 30. So in this case, the sound plays too early, and therefore the sound effect doesnt match with the animation itself. I wanted my animation to be at 24 fps, so i assume theres something that i have to do to get sound to sync properly with the animation at 24 fps.
View 2 RepliesI have some problems about installing FMS 4 on a CentOS 6 x64. After installing, FMS doens't start properly. I don't see the videos on the web interface. In the log file master.00.log, i can see these errors messages
2011-12-0608:38:461675(i)2581226Edge (1748) is no longer active.- 2011-12-0608:38:461675(w)2581255Edge (1748) _defaultRoot__edge1 experienced 1 failure[s]!- 2011-12-0608:38:461675(i)2581224Edge (1798) started, arguments : -edgeports ":1935" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
[Code]...
I made a few functions that should fade between tracks very simply. I start with track1, then call my initial function to fade to track2 -- works just fine. Then later when I want to call it to fade back to track1 it will fade track1 in but keep track2 playing (when the first time it properly fades the already playing track out) --Here is the code (all variables are defined earlier):
ActionScript Code:
/* trans is my SoundTransform
channel is my SoundChannel
newSong is a holding var*/
[code]....
I found a script which loads text from a TXT file. Nou the code workd fine on a button, but assoon i putt that code on a MC it doesn't load the variables properly. That meas; i don't any script errors, but the text doesn't appera in the dynamic texterea.[code]
View 4 RepliesI boot up Flash CS4 and all I see in the upper left corner are the three dots for Apple's Snow Leopard interface. Flash was working fine yesterday, then last evening, all I got were the three dots. The menus are there. They open, but they are acting flakey. I can open up a file, but none of the palettes or interface show up. The stage is located under Apple's menu bar at the 0,0 location of the monitor and unmovable.
I deleted the preference files from my user library and also a file called "Flash 10 mru". That didn't do a thing.
The only change I made yesterday was an upgrade Adobe supplied for Premiere.
I also upgraded to Snow Leopard over the old Leopard, rather than a clean install.
But Flash was working fine on it for a month before yesterday's three dots attack.
Flash CS3 works fine.
Flash CS4 works fine on my laptop with Snow Leopard.
This morning, I uninstalled the old and reinstalled a new copy. Really at a loss as to what to do.
I was thinking of doing a clean install of Snow Leopard on a new hd and starting over. Before I do all that, I was hoping there was an easier fix.
[URL]
So I made a flash that uses a preloader, then once finished loading mc1 should be visible and playing along with a couple buttons. It loads properly most of the time, but maybe 10% of the time mc2 loads instead of mc1, no buttons are visible, and mc2 isn't even playing (refreshing the browser makes everything work properly btw). Is there some way I can make it load properly 100% of the time?
View 1 RepliesTake a look at [URL] I have made a preloader for a site but the tween dosnt seem to be working properly. Stop the page from loading as soon as you see the preloader. You'll notice that the preloader circle appears to shimmer, i have no idea why. its basically a photoshop psd file that i have dropped to the stage as a graphic and then done a motion tween to make it rotate across 24 frames. I have set the html page to show the flash at 'best' quality and tried it on a black background to see if it was an optical effect, but its always the same.
View 1 RepliesI have a preloader which loads an external swf. When I test locally, everything works fine, but when I test remotely: Preloader runs.External swf doesn't load into preloader. I am using the contentPath to load my external swf, and the only as2 I am using is: on (complete) { this._parent.loaderPB._visible = false; this._parent.mcbgdloader.visible = false;} to hide the progress bar and graphic used in the preloader.
I hope I provided enough info. The preloader is a regular fla and the external uses screens.
I recently created a visual quiz app which asks a question and then gives 4 image answers.
The problem that I'm having is that the images don't shrink the image into their quadrants, but rather, zooms in on the top left corner of the image.
Can anyone tell me what I have to change in the following code to make the images display at a set width (so that they fit in the quadrants proportionally).
Here is what the SWF looks like now. As you can see the images become distorted because they are being stretched. What should happen is that the images be displayed at a fixed width and variable height. [URL]
Code:
var dataXML:XML = new XML();
var arrSounds:Array = new Array();
var arrData:Array = new Array();
var rndData:Array = new Array();
[Code]....
I have been trying to get my file to work for a day and a half now. Any help with the error or why the loading screen doesn't work properly [URL]
View 9 RepliesI have a file with multiple buttons. The task at hand seems simple. Use eventListeners to go back and forth between frames. Here is the code I am using.
[Code].....
I've tried creating this project using movie clips instead of buttons, and it seems without a hit area the mouse_rollover doesn't work properly, it just flickers. All I'm trying to do is roll over the number have the background be a dark transparency and bring up the text box for 18 different numbers... Seems simple right? I've attached the current broken file for you to explore.
I 'm building a slide show w/ as2, most of the function are fine. However, the pause button doesn't work properly. It can pause the slide show, but not able to play the slide show again. (fyi - the previous btn & next btn work fine !) [code]
View 1 Repliescheck this out: [URL] this swf does use this code:
Code:
optredens = new LoadVars();
optredens.load("optredens.txt");
optredens.onLoad = function(){
_root.aankomend = this.aankomend;
_root.geweest = this.geweest;
}
as you see in the swf you first have to switch with "aankomende optredens" en "gespeelde optredens" before you can read the aankomende optredens text... why? i just want it to load immediately, so you can read it... without having to read "undefined"
I have a slide show that displays 6 images and is suppose to do a fade in / fade out (not an overlap fade) between each image. The peculiar behavior is that when the movie is testedlocally by using "Test Movie", the fades occur properly. However when the swf is viewed from the website, during the first cycle of the slideshow, the next image does NOT fade in. After the first cycle, the fade in occurs properly.
Code:
import mx.transitions.Tween;
var nInterval:Number;
[code].....
i have used the setinterval in a module. i clear the inetrval each time i make it using a function in other class. on long time run the clear interval stops functioning.
View 1 RepliesI recently created a visual quiz app which asks a question and then gives 4 image answers.The problem that I'm having is that the images don't shrink the image into their quadrants, but rather, zooms in on the top left corner of the image.Can anyone tell me what I have to change in the following code to make the images display at a set width (so that they fit in the quadrants proportionally).Here is what the SWF looks like now. As you can see the images become distorted because they are being stretched. What should happen is that the images be displayed at a fixed width and variable height.
Code:
var dataXML:XML = new XML();
var arrSounds:Array = new Array();
[code].....
[URL] this swf does use this code:
Code:
optredens = new LoadVars();
optredens.load("optredens.txt");
optredens.onLoad = function(){
[code]...
as you see in the swf you first have to switch with "aankomende optredens" en "gespeelde optredens" before you can read the aankomende optredens text... why? i just want it to load immediately, so you can read it... without having to read "undefined"...
created a new layer with one keyframe in frame 1, which spans the whole animation. In this layer I entered the ActionScript in REFERENCE 1. It works fine in several browsers, including IE8, FF3.6, and Chrome, and works for the customer. Then....
Their webmaster emailed back saying that he "did not see any links in the new banner." I'm not sure what this means, and if he actually tested the code.They sent me an example from a previous developer, which is REFERENCE 2.I compared it to what I published--which was generated by the CS4 "Publish" option. This is REFERENCE 3.Did I do something wrong? Everything works in all my tests, and they work for the customer.
It looks like they're missing a lot of information from the header. It is much smaller than the header that CS4 generates. They also have a link under the <!--url's used in the movie--> comment. Could this affect the performance? To my knowledge, this is obsolete. Perhaps they used an older version of Flash?
REFERENCE 1: ACTIONSCRIPT TO MAKE BANNER A LINK.
stage.addEventListener( MouseEvent.CLICK, function(evt:MouseEvent):void { var url:String = "http://www.URL.com/"; var window:String = "_blank"; var request:URLRequest = new URLRequest(url); try { navigateToURL(request,window); } catch (e:Error) { trace("Page unavailable. Please refresh this page to try again."); } } );
REFERENCE 2: EXAMPLE SENT FROM WEBMASTER
(NOTE VERY SMALL HEADER)
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"><head><meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><title>148x300_af</title><script language="javascript">AC_FL_RunContent = 0;</script><script src="AC_RunActiveContent.js" language="javascript"></script></head>
[code]....
have a file which only shows up as a black box (correct size) on the posted html page. The status bar indicates "waiting for the page..." etc., but nothing changes on the page.There is another swf file on the same page and is working perfectly, but the above mentioned file still does nothing.
View 2 RepliesHere is the website: [URL]. If you visit the gallery, the images are sliding TOO fast and i have no idea why, They work fine if I test in the Flash.
View 1 Replies