I hav an image which i haved converted into a symbol(button)Now the thing is..inside the Button movie clip, i hav embedded a sound only on the mouse-over keyframe but My problem is that when i click the button(mouse-down), i get the sound too.
View 1 RepliesWhat I want to create is a group of 13 images and upon rollover each image would make a different sound. I don't want the sound to stop once you move the mouse though because I want a few different sounds playing at the same time. At this point I don't really care whether they play for their whole duration or just for another 15 seconds! I'm doing this for Uni and the guy said it wasn't that hard.
I have some basic knowledge in HTML code, but I am a complete newbie to flash. I've downloaded Flash C5 and that's about as far as I've got! I'm not entirely sure which template if any I would need to use. I can't pay back in knowledge since I don't know anything, but I could bake you cookies?!
i know this is a problem allread often talked about, but i cant solve it.i want to start and stop a sound with a mouseclick event.the problem seems to be that the click event is never triggered. can anyone see why?
[Code]...
I have a selectino of swfs loading on designated keyoard events.
My problem is that the sound from 1.swf continues when I re-load the next swf. Even when the image has stopped. Here is my code.
var myrequest:URLRequest=new URLRequest("1.swf");
var myloader:Loader=new Loader();
myloader.load(myrequest);
stage.addChild(myloader);
[Code]....
how to stop sound when go to other frame ?
View 2 RepliesI have an FLV video loaded as an "external video with play back component" in my Flash site. It works pretty well, even loads fast regardless its 15MB size. The video located on its labeled section which has an "X" button which closes this section and brings a user back to the page with all the video sections. However once the labeled section with the video is closed the sound is still playing.Does any one know how to make it stop if the section with the video has been exited?Then go to HOW TO section and click on the link "here" for "The Arrangement" show it will bring you to the section with the video loaded as an "external video with play back component" in my Flash site.
View 4 RepliesI've been making the transition from AS2 to AS3 for the last week and am making progress. But I'm having a problem that hopefully someone can help me with. I'm using Flash CS5. I have a fairly simple Flash website I'm working on. I have sections on the timeline like Home, About, Photos, Media ... all set up using labels for each of those sections. Everything is working fine but when I go to my Media section where I have a video placed (using the flv component) I'm having a problem as follows:
The video auto plays fine when I go to the Media section but when I attempt to leave the section and go to another the sound of the video doesn't stop. It continues to play when I go to another section and if I go back to the section it starts again. The video is not there when I go to another section which is the part that's confusing me. In AS2 when I did this the video and the sound both stopped because you went to another section on the timeline. Why is the sound of the video not stopping in AS3?
I have created an animation by making a series of frames. So now I have a FLA file with the frames in.So far, so good.I can export this as a movie and create a SWF file.I can use this SWF file in a HTML document and get it to display in the browser.This is where I hit a brick wall. I have done a lot of searches but I am getting something wrong. I need to adjust this FLA/SWF so that in the HTML file, when the SWF is first loaded it does not play. If the mouse moves over the object it starts/continues playing. If the mouse moves away it stops playing.
View 12 RepliesI am using Flash CS4. To illustrate, I created a new flash file and added a short tick sound to the library. I set the properties of the sound to export to Actionscript and named the class "overSound". I added a Movieclip object to the stage to represent a button and gave it an instance name of "overButton". On frame 1 of the main timeline I added the following code:
[Code]...
I have a bit of a problem with sound.. I have a main container animation with background sound that's loaded with soundChannel..I also have an externally loaded SWFs with Movie Clip buttons that have a sound ON ROLLOVER on the timeline..after rolling off - I place the:SoundMixer.stopAll();to stop the button from playing the sound once the mouse is rolled off.. However, the problem I'm running into is that it also stops the sound of the main container movie cli
View 1 Repliesi have programed a play button using:
[Code]...
now i am trying to program the stop button to allow the user to stop mid song....
I am using FLASH CS3.I have gone through many posts, seems to be an issue with many people.Still haven't come across a fix.Website made in FLASH. Flash movie loads and sound works great!I have a button with 'StopAllSounds' action script.[code]When I go back to main page... sound starts up again.Is there a way I can stop all sound regardless of where the visitor goes on the website?
View 2 RepliesI'm sure this is a common problem, I tried looking around on the forum for a problem like mine but was unable to find anything. I'm using Flash CS3, Actionscript 2.0, and am making a soundboard. I have two scenes, one that's the title screen, of which has a sound file loaded via the timeline, (I think) set to Event and Loop, and a button which takes you to the next scene and makes a short sound when it's pressed. My second scene has background music as well, also set to Event and Loop.
Problem is that when I press the button, the background music keeps playing into the next scene. I tried using putting stopAllSounds onto the button, but that makes the sound of the button stop as well, and I'd really like to keep it. I've been messing with this for days, and I can't figure it out.
i want to make a single button to play a sound, and if pressed again, stop the sound. and if pressed again, play the sound, and so on...
i know it has to be made with a boolean variable, true/false, but i just can't figure out how.
I use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 RepliesI have been trying to code this so that when my mouse rolls over the invisible button, an external mp3 file ("roundandround.mp3") will play.....and once the mouse goes out of the invisible button hit area, the song will stop playing. I have the below so far, but it isn't working---nothing plays when I roll over the button. I understand you can just drag and drop the sound file into the "over" frame of the button, but if you do that, how do you stop the song from playing when your mouse goes outside of the button?
var mySoundReq: URLRequest = new URLRequest("tv-static-04.mp3");
var mySound:Sound = new Sound();
var mySoundChannel:SoundChannel=new SoundChannel();
[Code].....
I have a MC that follows the mouse. I want to do so the MC will smoothly/softly stop when i stop moving the mouse. Is it hard to code, And it would be very nice if someone could do some code for it
View 2 RepliesNeed to make a character start to talk when the sound starts and stop talk when the sound stops so I'm using this:
[Code]...
i am using this on Mc
onClipEvent(enterFrame){
diffx = _root._xmouse - this._x ;
diffy = _root._ymouse - this._y ;
[code]....
how to stop spray when the mouse is stop
import com.greensock.*;
import com.greensock.easing.*;
stage.addEventListener(MouseEvent.MOUSE_MOVE,spray Flowers);
[Code]...
I want to use a sound loop in my flash movie. The movie has many scenes. And the problem is that when I go to next scene or different scene I hear the sound repeating twice. I mean sound does not stop from first scene and begins from the different scenes.Is there any way to play sound like "stop all sound" option in Flash.
View 6 RepliesI have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
Ive stumbled upon a few sites that have free sound FX's but the ones I want which I wuld think are the easiest to get I cant find.I want a sound for when someone clicks the right thing, like a under a sec tiriring or something like when you kill a guy in Leauge of Legends or something like that and also one for when you click the wrong thing like an windows warning ut a little different, yet all the sites and SFX I come across are for everything but those.
View 5 RepliesWhen my animations are playing in the flashplayer and you rightclick and uncheck the play command only the animations in the main timeline stop playing. All the child animations continue to play. How do I make it so they all will stop playing when play is unchecked?
Is there a event listener that monitors if the movie has been stopped?
I am creating an animation with very few controls for a presentation and it requires adding sound. I have my intro in the first frame with one sound and then want the user to click anywhere to start the animation and another sound.The problem I am having is sound control.No matter what I try the sounds overlap. I have managed to stop the first sound when going to the next frame - the animation, but the second sound now will not start. The first sound is called in from the library with the below code:
var snd = new Sound();
snd.attachSound("Tune");
and stopped when going on the next frame with:
[code].....
Need a way to stop a sound channel, then play the sound in the sound channel when a new song is selected. currently the songs just play on top of eachother at the same time.code obviously not working for a number of reasons.
View 1 RepliesI wish to be able to play a voice sound every 3 minutes. I have the sound in "mp3' format and need to repeat the message every 3 minutes.
[Code]...
The actionscript 3.0 I wrote makes the sound once but that's it. I have the "Loop" on but it only runs once. I need a Timer also but until I can get the sound goes its a mute point.
Im a beginner with action script, and is there a way to stop a sound using actionscript? My sound is called "CRICKET.mp3", if thats necessary to know.
View 11 RepliesIm new to actionscript. Im trying to stop one sound while another continues playing. how do i do this?
View 4 Replies