Professional :: Creating Rollover Sound - Stop Once Move The Mouse
Feb 22, 2012
What I want to create is a group of 13 images and upon rollover each image would make a different sound. I don't want the sound to stop once you move the mouse though because I want a few different sounds playing at the same time. At this point I don't really care whether they play for their whole duration or just for another 15 seconds! I'm doing this for Uni and the guy said it wasn't that hard.
I have some basic knowledge in HTML code, but I am a complete newbie to flash. I've downloaded Flash C5 and that's about as far as I've got! I'm not entirely sure which template if any I would need to use. I can't pay back in knowledge since I don't know anything, but I could bake you cookies?!
I hav an image which i haved converted into a symbol(button)Now the thing is..inside the Button movie clip, i hav embedded a sound only on the mouse-over keyframe but My problem is that when i click the button(mouse-down), i get the sound too.
I strolled across something neat on a radio website [URL] and I really like how they do the flash on the top left. Below is the link to the actual SWF for bigger so that you can see what the SWF looks like. on the link above, you can move your mouse over the squares and it pops up a little window. You can even click on that. Here is the link to the SWF. [URL]
im making a flash animation with a background two sets of text an invisible button and a song. im trying to make the the animation start when the mouse rolls over and have it stop and reset to the beginning when it rolls out. on my invisible button (first layer) i have
Basically I need a dynamic text field to be invisible on rollover and when you move your mouse off it, it becomes visible again. I have it working (see code below) however when the cursor is over the field and the cursor moves slightly over the area (still keeping it invisible) the cursor flickers between the normal arrow pointer and the text cursor. Is there a way I can stop this? Is there a better way to do this rollover that would prevent it?
what i am trying to achieve is have a rollover on a button that pops up a 'window' with some text on it (i have this bit worked out) then once the user has finished reading the text they rollout from the 'window' and the image behind is restored. i have attached the .fla so you can see what i mean.
what is going wrong is that the active part of the rollover on the button is only very small and as the 'window' expands and then reveals the text, the active part of the button remains small. so when the user moves his or her mouse the 'window' disappears. i'd like it to stay open until they rollout from the entire text window.
I created a movie clip that I am using as a button. I created the states in the clip (up, down, over) and the graphics work, but the sound is driving me crazy. I have a rollover loop that plays and a special click sound on the down/press. On the mouseclick, I want the rollover loop to stop and the down/click sound to play. Also, a getURL is happening on the release. Basically, everything works, except you can't hear the down/click sound. All sound just stops on the click.THis is AS2. Here's my code on the first frame. In the clip/button itself, I have the states labeled, the sounds placed using the properties and a stop on each keyframe of each state.:
i am trying to make flash for website where many smileys are there on the screen and they follow the mouse at varying speed.now when i rollover to any smiley it should display a speech bubble with dynamic text..the problem is in the rollover..it does not stop there but keeps moving so speech bubble disappears very fast.im attaching the fla.
My swf works with scenes. In the 1st scene i build a sound object :
PHP Code:
mysound = new Sound(); mysound.attachSound("thesound.wav"); mysound.start(0,loop);[code].....
but when i move to the 2nd scene, the sound stop looping... I could restart it using _root.mysound.start(0,loop) but it would restart the sound when you move from scene1 to scene2 so cut it up in the middle and restart which isn't so nice..
I am trying to play a sound clip using actionscript 2 the code I am using is attached to a button and the code I used is the following.
[Code]...
My problem is that the sound clip loops and I do not want it to do so. I have other animations going on on the stage. I tried to place the stop(); command but I do not seem to be able to make it stop after my sound has played once.
am new action script just started to learnstarted with 2.0 i had small scenario imagine any shape which is in rotating motion through motion tweennow what i what is through AS whenever i move mouse over it , it should stop rotating
I'm trying to make a stop button to make it stop playing the sound. But I get an error saying: TypeError: Error #1006: stop is not a function. at sound/SoundStop()
Here is the function for my stop button: function SoundStop(event:MouseEvent):void { cs.stop(); isPlaying:false }
i'm making a rollover menu with AS3, and when the user mouse clicks I want it to go to a certain frame in a movie clip and stop. It does this fine, however I have an animation for it to play on Mouse out. So when user mouse clicks then mouse outs from the button area it plays my mouse out animation and i'm back to square one. How can i tell it to ignore the mouse out animation if the user has clicked the button?
I have about 4 or five objects moving around the screen. when I rollover one of the objects, I need all the objects to stop moving... when i move the mouse away from the abject, all objects on the screen need to start moving again.
I'm in the middle of redesigning my portfolio site and I'm running into an issue in Flash. I have added a sound to the rollover of a movieclip button and it works fine as I navigate forward through the site, but when I jump backwards the sound starts repeating and it multiplies by the number of times I go back. I have put the sound in using the properties palette and am wondering if there is a simple way to add some AS3 code to the rollover function. I'm sure it is a simple fix, but I'm no AS3 master by any stretch. Below is my current button code. Can I just add code to the 'onRollOverHandler' function?
I created a button in Illustrator and imported to my Flash library. The button has drop shadows, overlay and gradients. It imports and previews just fine until I change it to a button. When I go to preview it, there are these thick red boxes that seems to incase every layer of the button?
I'm basically looking to create some buttons that once 'rollover'd' grow slightly, and shrink again once 'rollout'd' and I am hoping to add a little bounce (or I believe its called elastic) once it snaps back. I am a beginner, but have created buttons before with rollover, rollout etc but arent sure how to create the motion of it growing in the button. (I am using Flash CS4 and was intending AS3, but happy to use whatever is recommended for this.) I did use this site tutorial [URL], but I wasn't sure which AS or CS it was using. Everything worked but the motion of the growing.
i know this is a problem allread often talked about, but i cant solve it.i want to start and stop a sound with a mouseclick event.the problem seems to be that the click event is never triggered. can anyone see why?
I am a Trainee Web Designer. I have done a few major projects for websites and stuff using alot of Adobe Programs but i have this job where i need to make a map of a school with rollover mouse effects. So when the mouse rolls over the Admin Building on the map, a large picture of the Admin Building comes up. Then when the mouse is moved away the images closes. I need to do that with about 8 images. I have one main image which is an arial of the school, then there is different sections that i need to make 'active'
How can i go about doing this? i have looked for tutorials for ages now but they are either outdated or too advanced for me, i just need a tutorial that can show me how to achieve my goal. i cotton onto things very quickly so i dont get lost unless things get too advanced or there is a lack of explanation.
I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
I'm interested in learning how to create a "3d" object that a user can interact with using their mouse. I've taken 60+ pictures of a camera rotating by 5 degree increments and I'm trying to put together something similar to what Verizon has on their website for phones - Where your mouse rolls over an object and rotates it.
I've seen this done with Java as well, but I'm interested in how flash does it.
I'm using CS5 actionscript 2. I would like to create hovering text when one mouses over an item in the navigation window (please see pic). You know, something that would act like a brief abstract to give the user more info re: whether or not they need to click on that link.At present, the nav_mc is linked to an xml doc FYI (the nav_mc accordians in and out, but doesn't have to). I input what I want the menu and submenu to say in the xml nodes and it shows up. It would be cool if the hover text added could also be xml driven tooI am green to this so the more detail the better. Do I need to create a new xml doc? new .swf? How do I link this? Should I use Flash Builder or Catalyst?
I have a movieclip which needs to move with the cursor of the mouse, i have got the mousemove function, but i need to add constraints so that the movieclip only moves to the left with the mouse, and to the right with the mouse.
well i want to make buttons that on rollover move to left, on rollout move back to their initial position, and if clicked, they but stay this time at the final rollover place, and be there until something else is clicked. When something else is clicked, the previous button , returns to its initial place. So i ve got it all figured out except for the freeze and move part when the buttons are clicked. All it does now , is when they are clicked they freeze at the position i want, but i havent got a clue how to update them, after so they start moving back, and reacting on rollover and rollout, when the next button is clicked.
I created a button that has a movieclip in the rollover state. When you rollover the mouse, the movieclip will animate to appear as if the button will scale from a small to a large button even though it is the movieclip that is playing and not the button itself. But I also want to add a keyboard code to play the rollover instead of the mouse. I learned to write actionscript to play different scenes with the code below, but I'm not sure if I can play a button rollover with the same code.
stage.addEventListener(KeyboardEvent.KEY_DOWN, key_pressed); function key_pressed(event:KeyboardEvent):void { if (event.charCode==49) { gotoAndPlay(1,"scene"); }
