Professional :: Creating Button To Grow Slightly When Rollover
Oct 6, 2011
I'm basically looking to create some buttons that once 'rollover'd' grow slightly, and shrink again once 'rollout'd' and I am hoping to add a little bounce (or I believe its called elastic) once it snaps back. I am a beginner, but have created buttons before with rollover, rollout etc but arent sure how to create the motion of it growing in the button. (I am using Flash CS4 and was intending AS3, but happy to use whatever is recommended for this.) I did use this site tutorial [URL], but I wasn't sure which AS or CS it was using. Everything worked but the motion of the growing.
View 8 Replies
Similar Posts:
Mar 16, 2008
i'm an AS2 novice but I wanted to write a class that when you rollover a button it would grow and the others would shrink! At this point it's only missing the other buttons to shrink cause I have no Idea on how to refer them in the code!
[Code]...
View 1 Replies
Oct 24, 2006
The problem with this version is that i want the clicked button to grow and stay larger than the other buttons. And when you click another button, that button becomes large and the last clicked button gets smaller. I've figured out how to do that, which you will see in a moment, but that is not my problem. Now, with this version I am actually using a proximity formula for the rollovers instead of actual rollOver handlers, and the buttons seem to respond well. Here is the modified version of the nav, using rollOver handlers and growing and shrinking the appropriate buttons:[URL]
As you can see here, this version seems to be working fine as long as you are rolling over the buttons fairly quickly. But, if you put your mouse right on the edge of the button, I think you'll see that the button goes into some sort of pulsing action, larger and smaller. It may stop after a moment or it may not. In an effort to find the problem, i removed each property (alpha,blur,bevel, etc) one at a time and basically figured out that mainly the blur filter is causing the button to act erratically. Without the blur filter, it works just fine.
I'm wondering if anyone else has had this sort of problem and if there is a solution to it (besides getting rid of the blur ). I could go back to using proximity for the rollovers, but i had a hard time keeping the buttons enlarged when you roll away from them. That's why i went back to using onRollOver instead. Sorry for the long and rambling post, but sometimes it's hard to explain certain things in just a few words..
View 3 Replies
Jul 8, 2010
I created a button in Illustrator and imported to my Flash library. The button has drop shadows, overlay and gradients. It imports and previews just fine until I change it to a button. When I go to preview it, there are these thick red boxes that seems to incase every layer of the button?
View 3 Replies
Mar 21, 2010
My first time making anything in flash, so go easy on me. I made a set of navigation buttons for a website I'm building for a friend of mine.
When I make it in Flash, everything looks perfect. When I save it as a movie and run on my computer (in Flash Player 6), it still looks perfect. But when I put it on my website, the "M" in "HOME" gets distorted (on all browsers). See here: [URL]
Using Flash MX, can't afford the upgrade to CS right now!
View 1 Replies
Dec 30, 2010
I was wondering if there is a way to find a slightly darker and slightly lighter colour based on a particular value?
I have a MovieClip with 2 nested MovieClips inside. The background movie I set to a certain colour using ColorTransform and the other movie is sort of shading.
What I'm trying to do is make sure that I transform the shadings colour to be a darker shade of the background movie's colour.
I was also thinking could I then have a mid point where if the background colour is really dark have the shading start to be a certain shade lighter?
View 1 Replies
Mar 14, 2011
I'm trying to create reusable rollover button states with dynamic/changing text - any cleaver workaround for that?
View 1 Replies
Feb 22, 2012
What I want to create is a group of 13 images and upon rollover each image would make a different sound. I don't want the sound to stop once you move the mouse though because I want a few different sounds playing at the same time. At this point I don't really care whether they play for their whole duration or just for another 15 seconds! I'm doing this for Uni and the guy said it wasn't that hard.
I have some basic knowledge in HTML code, but I am a complete newbie to flash. I've downloaded Flash C5 and that's about as far as I've got! I'm not entirely sure which template if any I would need to use. I can't pay back in knowledge since I don't know anything, but I could bake you cookies?!
View 1 Replies
Mar 26, 2010
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 Replies
Feb 10, 2012
I set my images at 60% quality JPG files out of photoshop which seems to give a very nice representation. I set up a site to take a full screen, so I expect it to be larger on a bigger screen then what I see on mine. I figured to keep every image actual size at about 25% bigger when the finlal needed size in the layout, so if the site is ever on the bigger screen then images have some stored resolution to be enlarged and accomodate an increase in size. So all of mine images are scaled at about 75%.
Is it a good practise or things don't work this way in Flash? Perhaps it is better to keep the images to 100% (rather than importing intentially enlarges images) but make the maximum quality? Or both ways kind of work out?
View 3 Replies
Jul 20, 2010
I am using the following code (Actionscript 3) to animate my button:
stop();import fl.transitions.Tween;import fl.transitions.easing.*;
var HomeTween:Tween = new Tween(Home, "x", Elastic.easeOut, -500, 20, 5, true);
Home.addEventListener(MouseEvent.CLICK,HomeClickHandler);
function HomeClickHandler(event:MouseEvent):void { navigateToURL (new URLRequest
[Code]...
View 3 Replies
Jul 18, 2011
I am making a Flash ad for my company. I am a beginner/intermediate Flash user. I need to add a clickTag, which is done. The issue is that I want the button to "shimmer" when it is rolled over. I cannot figure out how to make this work with the clickTag having to be the topmost layer in the file.
This is what I have so far:
shinyButton.onRollOver = function() { this.glitter.play();};clicktag_but.onPress = function(){ getURL(_root.clickTAG, "_blank");};
[code].....
View 3 Replies
Feb 20, 2010
I have two buttons and an swf file (a movie I created in After Effects). I want to do the following:
-When the page loads I would like the swf file (the TV) the stay frozen on frame 1 (the picture of the child's face).
-When the mouse is rolled-over the "Home" button, I want the swf file (the TV) to play frames 2-59, and loop on these frames until the mouse is rolled-off the "Home" button.
-When the mouse rolls off of the "Home" button I want the swf file (the TV) to instantly go back to frame 1 and stay on frame 1 until the mouse rollsover another button.
If the mouse rolls over the "Products" button, I want the TV to loop frames 60-109, and again instantly go back to frame 1 when the mouse is rolled-off the "Products" button. I will use these buttons as a template, copy and paste them, so that I can easily make different segments of the TV play when different buttons are rolled-over. Please take a look at the fla file [URL]. The fla file is a little large (about 23 megs).
View 3 Replies
Aug 1, 2010
I have a menu that when you click on a button, an external swf is called up. However I would like for the buttons in the Over and Down state to show an image on top of the external swf with a description of what the video is about (Basically when they rollover the button).
The problem is that the image shows behind the external swf. I cannot get it to appear on top of the external swf. I have tried putting the buttons layer on top of the actions layer but that doesn't work.
View 1 Replies
Jan 24, 2012
Okay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
View 1 Replies
Jun 21, 2010
I want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
View 4 Replies
Apr 29, 2008
I'm making an interactive map of the U.S. The layer with the outlines of the U.S. states sits on top. It has to sit on top because otherwise the outlines don't show up above the color fills for each state. I want a popup balloon to appear when you roll over each U.S. state. However, when I turn a state, say, New York, into a button, the button layer sits below the outline layer. So when I create the popup box for the button's rollover state, the popup box is *under* the US state outlines. How can I make the button rollover state exist on the highest layer?
View 2 Replies
Jun 1, 2010
I created a button that has a movieclip in the rollover state. When you rollover the mouse, the movieclip will animate to appear as if the button will scale from a small to a large button even though it is the movieclip that is playing and not the button itself. But I also want to add a keyboard code to play the rollover instead of the mouse. I learned to write actionscript to play different scenes with the code below, but I'm not sure if I can play a button rollover with the same code.
stage.addEventListener(KeyboardEvent.KEY_DOWN, key_pressed);
function key_pressed(event:KeyboardEvent):void {
if (event.charCode==49) {
gotoAndPlay(1,"scene");
}
View 1 Replies
Jul 26, 2009
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
View 1 Replies
May 20, 2010
I Created a regular button,How to set it to Open a Dialog Box?
View 5 Replies
Jul 28, 2004
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 Replies
Jan 5, 2011
I am fairly new with using FlashCS5. I just finished the class and created a button with text in it for class but now when I need to do it for a project I can't seem to get it to work.I am trying to create a simple start and stop button to start and stop a Flash movie.I can get the buttons to work without any text, such as the word start and stop in the middle of each.Everything I've tried to do with the text on the button turns out the same.What happens is that in Flash the buttons appear to work fine The little hand with the finger shows no matter where I place my cursor on the button but when I test them the area where the text is does not allow the click to work. I have tried specifying a hit area and made sure that the hit area was larger than the entire button but still the middle where the text is doesn't work.
View 8 Replies
Jan 13, 2011
Is it possible to create an On/Off button to toggle audio on and off using AS3?
The Adobe help files do not seem to provide this, only AS2 options using Behaviours.
When I click on a button and choose Behaviours I get a warning that it only works with AS2.
I change the project to AS2 and then half of my actionscript stops working.
View 3 Replies
Feb 19, 2012
I'm making a graphic button for a news app that allows the user to click on a headline.The button is composed of font and a rectangular shape in the back of the text. I want the text to be 100% transparent, and create the effect that you can see in the titles of this movie poster:
[URL]
does anyone know how to do this? doing it the way you would think...which is just to make the text 100% transparant doesnt work because the the background shape of the button (about 65% transparent) is in the way.
View 1 Replies
Feb 5, 2010
In AS2 I need code for a button, on the main timeline, to go to a frame in a mc off the main time line. I have attached a picture of the time lines in case I have not articulated my needs well.
View 5 Replies
Dec 26, 2000
I want a a definition to pop up when the user's mouse rolls over a word in the movie. What's the simplest way to do this?
View 5 Replies
Oct 28, 2010
I'm trying to create a scale in and out roll-over that's nice and smooth. I have had a fiddle with the scaleX and scaleY, but can't make it transition from original to enlarged size and back again smoothly..
View 2 Replies
May 28, 2010
am trying to find a way to display an image (a shelf with various pieces of art.) I want each piece to be a link where the user can click on it, and it will pop up in a new window, or an area below the main image where it will show a larger, up-close view, with details, such as price, meanings, ect.
View 3 Replies
Feb 11, 2009
I'm trying to fade in a video player controls_mc. I can do that fine using:
controls_mc.onRollOver = function() {
TweenLite.to(controls_mc, 1, {_alpha:100, ease:Strong.easeOut});
delete onRollOver;
[code].....
View 3 Replies
Jun 18, 2006
So I have a window that slides in when its rolled over. It goes back to its origin when the user rolls off the window. Now within that window I have a scroll feature taht creates a conflict with the window actions when the user tries to use the scrollbar elements. I want the window to stay open, while the user is scrolling and i want the window to close when the user rolls off the window.
It could be easier to have the user click the window open/closed...but I was wondering if there is a way I could keep my original vision...here is what i wrote for the window code:
[AS]window.backdimmer._alpha=0;
window.trigger.onRollOver = function() {
window.slideTo(-360, "_y", .4, "easeoutbounce");
[Code]....
View 3 Replies
