I have one layer with two tween spans, and would like to have a different symbol for each span. However, I cannot seem to do this without adding a keyframe in between the spans: if I have just the two tween spans, and replace the symbol in one, the symbol in the other span is also changed. What am I doing wrong here? (Using CS4)
View 3 Replies
I have created a motion tween to fade in a symbol on the stage. I have set a there is a diamond keyframe marker at the point where the alpha of the symbol goes to 100%. I want to be able to drag that marker to a later point on the motion tween span (not sure if I have my terminology right here) but I find that I cannot -- I have to delete the keyframe and recreate it at the point where I want it.
View 1 RepliesI've made 3 different symbols of a running Super Mario -- the first one is his first running frame in the Super Mario Bros. video game, the second one is his second running frame, etc. I would like to create a motion tween of these 3 symbols, so it looks like he's running from one point of the screen to the other. I'm unsure of how I would go ahead to accomplish this.
View 5 RepliesI have asked this question in another forum but haven't got an answer yet. I have just started using Flash CS5 recently and have a question about the classic tween. I have noticed that when I make a classic tween Flash automatically makes symbols out of my grouped objects. I have worked with previous versions and it was sufficient to just group my objects on the stage to make a tween. Is there a way to turn this feature off? I'm an animator and it's very annoying and messy to make a symbol out of all the objects I want to animate.
When I add a tween (CS3) I always used the Properties panel and choose "motion" from the tween settings. This way there's no symbols added in the library. Just noticed that there are also tween symbols added if I add a tween using right Mouse click or via the menu Insert>Timeline>CreateMotionTween. Never used this before. But I can't seem to see any tween settings on the properties tab anymore in CS5.
I'm rather belatedly getting to grips with the new tweening system introduced in CS4. To be quite honest it's been a nightmare, but I'm starting to see its good points now.One thing that still drives me crazy is when you create a new tween and Flash creates a new layer for you and puts the tween into it. Why? And how do I stop it? Over the course of a 10 min animation with a lot of tweens I could end up with hundreds of layers
View 2 RepliesIF you copy a motion tween as an AS how do you insert the code so that it still performs the motion?I created a motion tween, copied it, deleted all frames, made just 1 frame, placed the object on the frame (from the library with the same name used in the original tween) pasted the AS onto that frame of the relevant layer but it does not work
[Code]....
I know it is very easy. Right click> create motion tween> drag to where I would like the text/object to move. But, Sometimes it doesn't seem to work when I drag the text. It will work the first time and for the second text on the frame it won't work. What are the requirements of a motion tween when it comes to text on a single layer in the same frame.
View 2 RepliesThe thing is, I am coloring though code the parts of a body, which is a movieclip composed by other movieclips. I am coding in AS2, using the setRGB function from the Color class. Everything is working ok, but there is one arm that is not being colored.
This arm actually is in one layer with several keyframes, half of them have one symbol, and the other half have another symbol. Both symbols represent the arm in different positions. Now, even though they are different symbols, I have named both instances with the same name, but with this solution the arm is not being colored. So I tried to remove the keyframes with the second symbol, and then it got colored.
To sum up, I don�t know how to reach all the symbols in different keyframes of the same layer through code.
I'm attempting to use CS4 (PC/Vista, if that matters) to create a SWF file that will basically act as a "library" of commonly used symbols. This SWF would be loaded at runtime by other SWFs, which could then use the symbols within it, including all art and code assets.
[Code]...
I created a multi symbol model character and rigged it with bones. Now when i add a keyframe, some of the symbols (hand, belly) disapear in the new frame. also, some of the symbols return to 100% alpha when they should stay invisible (handles for legs, arms etc.)
View 1 RepliesI'm creating a game-engine, which will add objects to itself as symbols, and I want to be able to choose how they are "layered". For example, say I decide to model things in a type of 3D, and the Z co-ordinate is used for depth (distance from front), how would I translate this into an object 1 unit away rendering in front of an object rendering 2 units away? The engine programming I've done fine in terms of calculating the values etc., as I have a strong javascript background so that was the easy what with actionscript's neat OO syntax, but getting it to do things visually is a bit problematic know, heh. So far all I've really managed is a nice little loading bar, which isn't really that hard =D
Also, the symbols I create are actually going to be comprised of multiple parts; a base-layer, a detail-layer, and a colour-layer. What is the easiest way to do this? Ideally I'd create the symbol with multiple layers of its own, and simply toggle the detail and colour-layers on/off as required, and tint the colour-layer independently of the rest of the symbol. Is this possible? Or will I need to use multiple symbols and move them in tandem myself?
I'm confused as to how Flash CS5 treats symbol instances across different frames in a given layer; If I add an object to a layer, and then add a keyframe to the existing frame set, are there now two instances of the object, one for each frame? When I change the color of the instance in the first key frame, the second keyframes instance stays the same. Is there anyway to edit across all frames? Paste across all frames?
View 2 RepliesI can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesI want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesI have just started using Flash CS5 recently and have a question about the classic tween. I have noticed that when I make a classic tween Flash automatically makes symbols out of my grouped objects. I have worked with previous versions and it was sufficient to just group my objects on the stage to make a tween. Is there a way to turn this feature off? I'm an animator and it's very annoying and messy to make a symbol out of all the objects I want to animate.
View 3 RepliesI have a MC called Canal_Paddle_mc on a different layer which I have called Canal_Paddle. The paddle has a motion tween on it. I want to be able to play that motion tween only when i click the mc on layer 1.
View 0 Repliesi want to have two different tweens on different movieclips within same layer...but what happens is..it groups both the mc into a single graphic...and applies tween for the entire graphic..and also i loose the Mc instance.
how can i achieve diff tweens on diff objects within a layer? More important is dont want to loose the MC instance
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesI will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.
View 2 RepliesI used the liquid Flash layout file from this site , but i got one problem.I placed the script in a layer called actionscript and on frame 1, under it there is a other layer called background. I placed in just a square with a gradient color and made it a movieclip. I also placed this on frame 1. Everything is working perfect from this point but when i want to place a keyframe on frame 10 in the background layer and make a motion tween so that the background fades in from 0 opacity to 100, it doesn't work.
View 13 RepliesI am facing a problem in one of my animation with flash CS4 - I have nested a Shape Tween in a Motion tween to get more control over the easers and effects, unfortunately I am not able to view on the timeline of my Motion Tween the action of the Shape tween nested inside.
It only show the first shape of the Shape Tween during the entire Motion Tween and that is really a problem for me because I need to see the final frame result of that Shape tween to be able to position it in a precise way on my scene according to other instances.
[Code]..
I'm making a "master movie" for an assignment and I'm stuck right now. What I've got is an Intro page that will serve at the Parent.swf to load 4 other child swf's upon a mouse click. The problem is I have a theater stage where I tweened an animation to make it appear the curtain on the stage is going up but once it reaches it maximum height....the tween abruptly stops. I want it to HOLD there until a user clicks a button.
How would I make this happen? Here is the page in question: [URL]...
When I open a document in Flash CS5.5 that was created in CS5, for some reason the buttons appear invisible when the document is published.
Buttons are also appearing invisible when they have been brought in from the library of another CS5.5 file.
I used this tut to create a menu. [URL] And my question is; Can I make the slider to move after a movie clip symbols instead of button symbols? That way my menu would be animated.
View 1 RepliesI'm working through a book called Foundation Game Design with Flash, and I'm finding the Flash IDE confusing. I've been programming for several years, so working with AS3 directly is far easier than trying to understand symbols and nested symbols and the difference between graphics and movie clips and scoping issues and all that -- when tied into the IDE.
How many of you who are making games in AS3 also use the Flash IDE? Can anyone recommend a resource that is AS3 heavy and Flash IDE light? I don't care how much time I may or may not save by using things like the timeline, I just want to understand what I'm using.
Is there any way to do that, well bone tool is for AS3 only.. so how would you connect symbols with other symbols?
View 5 Repliesmaking characters at the following link:
[URL]
The animator said that he has created two symbols: one for the body, and another symbol inside the body symbol for the head.What I don't understand is how he translated the layers over into the head symbol. When I click on the head symbol, all of the layers disappear and I cannot edit an object individually within a layer.
when I enter a symbol by default everything around that is not part of that symbol becomes faded - is there a way to disable this?
View 4 RepliesIn CS5, I want to create a simple series of still images that display in the Timeline for about 5 seconds each. Is there an easy way to do either of the following:
1. Change the Timeline to display in seconds instead of frames?
2. Specify how long something should appear prior to the next symbol showing up in the Timeline?
I have an .fla I created a while ago. In it is a movie clip in my library which I now want to use in a new .fla. This movie clip is reliant however on an image which is also in the library. I have tried selected both the image and movie clip, copy them, and paste them into my new library, but this doesnt work. I have tried cutting... I have tried duplicating and copying the duplicate. Nothing seems to work. Is there anyway of getting a symbol from one library into another?
View 3 Replies
