I'm getting "LoadNeverCompleted" as errorCode after using loadClip of MovieClipLoader for FlashLite 3.1. What does that mean?
View 7 RepliesI am trying to load a swf file into a movie clip. It works in IE but fails to load in FF.
ActionScript Code:
function onLoadComplete(mc)
{
[code]....
This happens in frame 20. before this happens I use nearly identical code to load an image into a movie clip which works in both browsers.
Code:
this.createEmptyMovieClip('test', this.getNextHighestDepth());
var pics:Array = new Array();
[code]....
I only discovered this problem when I started tracing values within and without different functions. In the onLoadInit function within my for loop, it only ever receives the last iteration of the loop:[code]Assuming that imgArray's length is 4, then the first trace statement will give me 0,1,2,3. However, the trace inside the loadClips's onLoadInit function will just spit out the last iteration for the number of loops, i.e. 3, 3, 3, 3.I really wanted to be able to use loadClip specifically for the onLoadInit function so I could size and place all my thumbnails dynamically,
View 2 RepliesWhen I load an external SWF into my UI SWF using MovieClipLoader.loadClip(), does the external SWF get cached?
Therefore, if the user tries to reload a SWF that had been previously loaded, the SWF will load from the local HDD instead of the website, right?
In my case, caching of content is important to reduce bandwidth usage.
I'm having a fun little bug with the loadClip function of the MovieClipLoader class. I've passed it a valid MovieClip and a valid filename (verified by traces) and it still returns false. It never calls the listener object I created with a onLoadStart or onLoadError event.
Code:
import mx.events.EventDispatcher;
import mx.utils.Delegate;
class MultiSWFManager_MiniLoader {
public var dispatchEvent:Function;
public var addEventListener:Function;
public var removeEventListener:Function;
[Code] ......
It never calls onLoadStart (I figured it might be a scope issue, so I placed the function inline. Otherwise, I created private functions for each event.)
I created a MovieClipLoader a few days ago that is reuseable. I will be using the same preloader graphics when I am loading in external swf on my stage. My MovieClipLoader functions fine with jpegs and smaller sized swf files. But whenever I load a larger sizes swf it loads the movie before it has fully downloaded in simulation mode. The odd part is that everything works fine with smaller swf files but not larger ones . I have tested a few movies and that seems to be the common theme.
In the example below main.swf is the clip I am loading into "mcBackground".
[Code]...
I'm using Actionscript 2.0, and I'm trying to pass a query parameter in the url portion of MovieClipLoader.loadClip, e.g. mcLoader.loadClip("movie1.swf?param=1234", blahblah);
but got the error "URLNotfound". If I omit "?param=1234", then it works. I need to put clip loading inside a class definition, so when I tried to use MovieClip.loadMovie, I find difficult to correctly setup the event handlers "onClipEvent(load)" or even worse with "onLoad".
I'm making a XML photogallery. Im using a MovieClipLoader to load multiple images on the screen at the same time. I've assigned variable path to hold image
[Code]....
We are using FlashLite 4 (Standalone player) supplied by BSquare in WinCE environment. In our product need to implement Action script extensions to communicate with C++ application. For this implementation we required ASextension classes supplying along with FlasLite Extension SDK. Is it available any evaluation version for FlasLite Extension SDK?
View 1 RepliesIs it posible to make a preloader of a SWF that loads an external JPG?
View 1 RepliesI'm trying to create a wrapper written in ActionScript2, which loads a second AS2 swf then when this loaded swf has finished animating the wrapper will load a second swf. This is the code I have to load the first swf:
[Code]....
I am building a prototype for a mobile phone UI. I need to be able to detect wether the left or right nav key has been held down and if so, move a navbar with increasing speed until the key is released.Does anyone know of a way of detecting this type of keypress?
View 1 RepliesAcatully I have to face an interview on flashlite. I am not at all getting how get prepare on that. Can anyone give guidlines, questions pattern, interview questions for that.
View 2 RepliesHow can I pass parameters to a Flash Lite 1.1 movie?
View 1 RepliesI wanna make a mobile app with voice recorder , give me a reference example like e-book, website, program.. etc , i wanna use flash lite 3 with as 2.0
View 1 RepliesI wanna make a mobile app with voice recorder eference example like e-book, website,program.. etc , i wanna use flash lite 3 with as 3.0
View 1 RepliesI am currently developing an application with a Flashlite frontend which communicates with a C# server. The C# server access a database to retrieve images (stored as byte[]) and feed them to the frontend. The thing is, im using XMLSockets so I tried to convert the byte array into a string which left me with something like "23659256239786107089710981890776178910976". I then send it over to the Flash lite, but how to turn this into an image. I am currently using Flash Lite 3.0 /AS 2.1
View 0 RepliesI'm making a simple photo gallery, and I'm having trouble loading the thumbnail images. I use the same method (loadClip()) to load the fully sized pictures, and there's no problem there. Even with the thumbnails, I could get the images to load properly when I hard coded each individual thumbnail. The problem is when I try to createEmptyMovieClip() and then loadClip() into these movieclips dynamically, if you will, so it can adjust itself to the number of images in the gallery. I get nothing. No images. Nothing shows up.This is my first time using the createEmptyMovieClip and loadClip methods,
Basically, the code is just creating a new movieclip (mc_thumbnails) to contain all the thumbnails. Then, it should create a new movieclip (inside mc_thumbnails) for each image available. Inside each of these clips (mc_thumbnail1, mc_thumbnail2, etc), the appropriate image should be loaded...
Code:
thumbnailMCLoader = new MovieClipLoader();
thumbnailPreloadObj = new Object();
thumbnailMCLoader.addListener(thumbnailPreloadObj);[code]...
I have used loadClip, and loadMovie a ton of times and have never ran into this problem, so I am hoping someone here can provide me some insight on how to fix this.
I am using loadClip() to load up external SWF's for a portfolio, everything is functioning perfectly, it preloads, it gets all the values from the clips properly, but when the movie loads up the animations from the SWF exceed (or go outside of, and are still visible) the published size. So instead of seeing what I normally see when I publish the SWF, I see everything that happens, even stuff that is meant to appear "off screen", or in the case of the SWF, outside the published size. As far as how I am going about loading up the SWF's, I am just using an empty movieclip and loading them into there.
I'm trying to load a .swf from a sub directory, and I've read that doesn't work. Why will Images load from a subdirectory using the loadClip method then?
View 12 RepliesI've loaded a swf into my project by using loadClip, and now need to put some movieclips over the top of it using attachMovie. All the new movieclips appear behind the loaded movieclip. Is this normal?The movie I have loaded is inside an empty movieclip I've created called "container". Eg:[code]The "sparkle" movie clips are attached much later, on a keypress.
View 1 RepliesThe gist of my problem is that currently i have a searchable XML database which contains projects that when clicked on, link to a new tab or window (depending on your browser) of that specific project. see and then click "WORK" on the left side, to see it in action... type CHICAGO or something like that to see how it works...Basically, in my quest to eliminate all pop ups and additional HTML pages, id like to click on the project name and have it execute my existing loadClip preloading function. I can not seem to figure out how to do this...
View 1 RepliesI have a nested blank clip (_root.banner.holder.picture) and want to load a picture into it, using the following code in the _root.No matter what I do, I can't get it to work
Code:
_root.myobject = "picture1";
loadpic = _root.myobject+".jpg";
[code].....
Basically, I have a main .swf, into which I am loading another .swf using loadClip(), on the click of a button. It loads into an empty movie clip on the timeline of the main .swf called container_mc. So far so good, this works.
The problem comes when I am trying to control a movie clip that lives on the timeline of the external .swf. This clip has the instance name test_mc, and I'm trying to control it using the reference _level0.container_mc.test_mc. I have also tried just plain old container_mc.test_mc.
Neither of these work, though when I apply a trace to test_mc with Actionscript on the timeline of the external swf (test_mc.onRelease = function () { trace(this); }), it returns the path _level0.container_mc.test_mc (when clicked on after being loaded into the main movie, obviously).
If you attempt to load an image into a movie clip and the load fails, you are unable to attach a library movie clip to it. The code below is from the fla file i attached herewith. All you need is a movieclip in your library with linkage name "Attach_MC" and this script in a 1-frame fla file. Or just download the fla file. What i am trying to do is attach a movieclip with a graphic that says "loading failed" if the load fails, so that it won't be blank but i can't do it unless perhaps by a workaround by placing a reserve clip in the same place (i.e. under a mask).
import mx.utils.Delegate;
var mcGlobal:MovieClip = this.createEmptyMovieClip("Stage_MC", 0);
var cLoader:MovieClipLoader = new MovieClipLoader();
var oListener:Object = new Object();
oListener.onLoadInit = Delgate.create(this, onLoadSuccess);
[Code] .....
Attachments: Bug.fla.zip (5.3 K)
I got the code below, reading a picture from an array.While in testmode or directly opening the .swf it works fine, but in a browser the picture is not loaded.
var listener:Object = new Object();
var mcl:MovieClipLoader = new MovieClipLoader();
var holder:MovieClip = item_mc_set.createEmptyMovieClip("holder",_root.ge
[code]......
I have a main .swf, into which I am loading another .swf using loadClip(), on the click of a button. It loads into an empty movie clip on the timeline of the main .swf called container_mc. So far so good, this works.The problem comes when I am trying to control a movie clip instance that lives on the timeline of the external .swf. This clip has the instance name test_mc, and I'm trying to control it using the reference _level0.container_mc.test_mc. I have also tried just plain old container_mc.test_mc.
Neither of these work, though when I apply a trace to test_mc on the timeline of the external swf (test_mc.onRelease = function () { trace(this); }), it returns the path _level0.container_mc.test_mc (when clicked on after being loaded into the main movie, obviously). I've attached a couple of files demonstrating the problem I'm having. It seems to me that the problem is probably something a little amiss with my code,
trying to load a new image and still making the previous_node on the background without any blink, most seamless possible, where I�m making the mistake...?
ActionScript Code:
previous_node = current_index-1;[code].....
All I want is to create 5 movieclips/layers each has 10 movie clips.
I use createEmptyMovieClip to create and loadClip to load images in a for loop, but loadClip doesnt function in following code, only loads last array index.
My code is:
Code:
total=5;
column=5;
[Code]...
Also, out of for loop, logoArray[ ][ ] (movie clips' reference array) cannot be accessed. trace(logoArray[x][y]) outputs blank page, logoArray[x][y].loadMovie(..) doesnot work