Sound Getting Clipped On Import?
Sep 5, 2009
I have a simple page with 8 buttons. Each button has a mp3 file that is set to play on mouseover. Each mp3 is 2 to 7 secs in duration. My problem is, 3 of the med length files are getting clipped at the beginning by a second or so. The others are fine, even the longest at 7 seconds. I have tested the files in the many media players I have and they are fine there. But I can see in the Flash Sound Edit window that the files are missing the beginning of the waveform.I have tried extending the timelines, but they won't budge. I have made other projects and imported the mp3's with the same results. If I import as a wav file, or any other, they come out perfect. It is only the mp3's that get clipped. I have even gone as far as to remix and remaster the clips with a tad of silence at both ends, rendered at different bitrates etc with no luck.
View 1 Replies
Similar Posts:
Jan 6, 2011
No matter the format no matter what the bit rate is, I can't import ANY audio files into flash CS4 without getting the error "One or more files were not imported because there were problems reading them"
This happens both when I import to the stage and import to the library. Please if you know anything about this issue please help otherwise the whole flash program is useless for me.
Also I found online that installing quicktime fixes the issue. It didn't work for me, I've reinstalled quicktime 3 times to make sure.
View 9 Replies
Jul 6, 2010
I have the following code:[code]basically what i need to do is play an internal mp3 from the library that has been exported for the first frame and has the same name as in the array.I have tried the attachSound method but it isn;t working, any ideas?
View 5 Replies
Apr 3, 2010
After I imported a .mp3 or .wav in Flash, and I check the sound in the library, the quality of the sound has decreased. Why does an import effect a sound, and how do I solve this? (PS: I do not mean that the sound-quality decreases after publishing, I know I can change the settings)
View 1 Replies
Aug 18, 2009
I`m using flash cs3 for my works , but i have one problem!when i use File=> Import=> Import to Library... or Import to Stage...the flash environment becomes terminated.I changed my flash version to CS4 and I have this problem again.
View 2 Replies
Nov 14, 2006
I create a custom control in a FLA, and compile it to a SWC. It works no problem, even the ActionSciprt. When I place theat control in a new FLA, it is clipped. I only see the lower right, because it thinks the center is upper left. Adding a 2nd control then makes the first available. WHAT THE FUGK IS THAT ABOUT? Also, to move either control, you have to grip it by some new blue rectangly that is no part of the control. This, also, is way off center.
View 14 Replies
Jan 13, 2011
I have a DataGrid in my project. It doesn't fit's the width of the form, so the scrollBar appears. The DataGrid, on it's initial state, displays a few columns and a part of the next column (which would appear after scrolling). Is there any way, I can get the width of this, displaying part?
View 2 Replies
Jan 17, 2011
I have a movie clip that is 2000px wide but when I view the movieclip on the stage it is clipped to 1000 ish px and I can only view the whole thing when I am editing the movieclip.Is there a setting so I can view the whole movieclip?
View 2 Replies
Jul 2, 2010
I am implementing the flash slider, Piecemaker, for the first time in my latest project. I've got a problem with it's animation being cropped by the width and height of its container, and I cannot for the life of me work out how to let it overflow outside its container during animations. There is also a weird problem I've just noticed that the top of the slider gets clipped off for some reason? who's worked with piecemaker, or something similar, or a css ninja see what the problem is? Here is the demo as it is at the moment - Link
View 2 Replies
Mar 30, 2011
I have a VBox inside a Canvas. The 'red bars' are custom components based on 'Canvas'. All red bars are of equal height. I have 20 red bars inside the VBox. The scrollbars visible in the screenshot are the Canvas's scrollbars. The scrollbars of the VBox are disabled using verticalScrollPolicy = off.
Without scrolling, only 16 red bars (and a part of the 17th bar) are visible. However, when I scroll down the Canvas I expect to see the remaining red bars - but the bars that are not visible when the application starts don't get 'drawn'. What am I doing wrong? I want the user to be able to see the 17th - 20th bars when the Canvas is scrolled down.
View 1 Replies
Jun 24, 2009
how do i make sure my flash movies are clipped at their stage dimensions for html.as it is now, anything thats big enough to over lap or are off my stage still show up.all i want displayed is whats on the stage, and nothing else. is there a specific code i need to use? or is it just a check box setting that i cant find in my publish settings?
View 1 Replies
Oct 30, 2011
what i'd like to do is create a button, and loop sounds in the "up" state of that button. the only problem is, that if i import the sound to the "up" keyframe and choose loop in the properties it keeps looping until the end of time. what i'd like though is it looping just in the event of the mouse being in the buttons' area. what should i do?
View 6 Replies
Oct 3, 2011
my client reports to me that some of the text is being clipped off in the text fields. I try to recreate the problem on my pc with chrome and firefox, but everything works fine. But he sends me screenshots from his mac with firefox, and sure enough they are being clipped. He claims its only fire-fox, and it is not a factor of window size. so here are the images to show whats going on:
[Code]...
View 2 Replies
Apr 16, 2011
I am triggering short sounds dynamically from the library for a game (Specifically Air for Android). When the user clicks a button the sound can take up to 600ms to actually play. I have set it for any silence before the actual sound by calling the sound like so:
[Code]...
All return the same results. I know there are threads here that talk about this but none have offered a real solution that I can find. Is there no way to cache the sound or store it in a buffer?
View 1 Replies
Jan 12, 2010
I am trying to use AlivePDF to save a chart into a .pdf file. However, when I try to save my chart, it ends up clipping half of the chart in the pdf so it isn't even fully visible. It seems that the screencapture that AlivePDF took to generate my pdf was too small.I am trying to get a chart from a sample to work with sample code for using alivepdf that I picked off the web.[code]
View 1 Replies
Jan 26, 2010
The "import "Player.as" line throws the error: 1084: Syntax error: expecting rightbrace before semicolon.
package {
import "Player.as"; //ERROR
import "Card.as";
public class Game {
I was going great with Flex, until I tried to split up my code into separate files. Now I'm struggling. Here are my files and their dependencies:
[Code]...
View 3 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
View 2 Replies
Jul 28, 2009
I have several buttons in a movie and I want to be able to rollover an individual button and play the sound for that button and when I rolloff I want the sound for that button to stop.
View 6 Replies
Jan 31, 2012
Is there any AS3 library or code-snippet that can create altered versions of a Sound object on-the-fly (at runtime)? Either based on:
An existing Sound object; A ByteArray object;
For example, say you have a "dry" sound of a gun-shot. You could:
[Code]...
View 1 Replies
May 21, 2010
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
View 4 Replies
Oct 20, 2011
I am using a flash app. I can send and receive streaming data to FMS by using this app, like the chart I attached. [URL] This app uses RTMP to access to FMS. I want to upgrade this app to display sound level of each client. Is it possible by using Actionscript and FMS? If so, which class should I use?
View 3 Replies
Mar 14, 2011
I have a project that requires me to display the waveform for a uploaded sound. The sound is always an MP3, most of the time 22.05 kHz mono, with speech only. The project are written with Flex/ActionScript 3. It's meant to run in the browser, but might also consider converting to AIR if that can help.
All examples I've found and looked at for generating a wave, are either doing some visualization in real time as the sound is playing, or, the most promising, as3soundeditorlib, keeps the wave already generated, but does it very slowly, seemingly using as long time as playing through the audio would've taken.Is there any way to generate the wave faster than real time?
View 2 Replies
May 20, 2011
I am using the following to extract the byte info from a sound object - however if I go back to the same sound object and run this again, The byteArray has no bytes available.
var data:ByteArray = new ByteArray;
sound.extract(data,sound.length*44.1);
data.position = 0;
return data;
Is this the correct behavior? Is there not a way to do this multiple times on the same sound object?
View 3 Replies
Oct 25, 2009
I have some sounds in my library. They are all exported and have been given class names like C, D, E etc. I have another class that represents a button. This class stores a reference to one of the Sound in my library. I set the type for this variable to Sound. When I try to set it I get the error: cannot convert C$ to flash.media.Sound I try as Sound, for example key.note = note_array[p] as Sound; The value ends up as null.
View 2 Replies
Sep 21, 2011
how to add mute sound and unmute sound script in a single button?
View 2 Replies
Jun 28, 2004
I want to attach a sound to the main timeline (rollover sound) that i can call from on(rollover) button events. I will be attaching the same sound to several buttons.
View 1 Replies
May 18, 2007
I use Flash MX 6.0
1) I have a button and when I put cursor over it, it must start looping a sound. When I drag away, the sound must stop. I would be even cooler if it was possible to make the sound fade away when the mouse is rolled away. I have no problem creating another sound file that fades my current sound away.
2) I have a button which represents a knife, that should stab something (a panel) once pressed. So fist the knife must be clean. but after one or more presses, the blood should remain as a movie clip (as I want to animate the dripping blood)
3) once rolled over a button, the sound must start looping (as I wrote in 1.) AND the knife should slowly go backwards (MC). BUT when I roll mouse away, the sound fades away (as in 1. again) PLUS the knife should slowly move back to its place in stead of just jump from one place to another.
View 1 Replies
Nov 11, 2009
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...
View 5 Replies
Jan 14, 2005
Does anyone know of a way to dynamically read the sound levels of a loaded MP3 to help produce dynamic sound visualization in Flash?
View 5 Replies
Jan 21, 2010
How to import sound with AS? Cuz i have tried it and my sound just wount play. Can you explain me where my sound should be and what is the as code for importing cuz i use
mysound = new Sound();
mysound.attachSound("SoundOn");
mysound.start();
and this SoundON from where i get it, i try to add linkage to the sound file but in CS4 i cant find the option;. I do it from the library, adding text into the linkage field but still my sound doesn't want to play?
View 15 Replies
