I have 3 layers in the timeline, and I want to make a new layer, and then use the new layer to be my first frame (like a startpage).
View 2 Replies
I'm having trouble using flashamp, I'm ovbiously writing the script in the wrong place I just cant quite get it These are the two errors flashamp teqh support sent me back
- script attached to frame 1 of the main timeline, not the instance of the Controller clip.- duplicate script attached to frame 1 of the Controller clip timeline not the root level instance of the Controller clip.
So I attatched the script to frame1 of the main timeline (this is wrong) but I cant figure how to attatch it to the instance of the controller clip? Then I have to attatch it to the root level instance of the controller clip, and so far I'm somewhat puzzled on how you do this.
How do I link a button thats embedded in frame 2 (music page timeline) to a frame in the main timeline ( frame 3= biography page)? Both pages are on the same scene with link buttons embedded in each page independent timeline.
View 1 RepliesI simply want to assign a variable to the current frame of the main timeline (not movieclip timeline) I already know about _currentframe and it doesn't help in this case.
View 4 RepliesI am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
I have created myself a new website and I get the following error
Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error.
at flash_fla::MainTimeline/frame1()
The website loads ok but if i navigate around and click home again i get:
Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error.
at flash_fla::MainTimeline/frame1()
at flash.display::MovieClip/gotoAndStop()
at flash_fla::MainTimeline/clickSection()
Here is the code im using, I have set up a few segments of code on different frames in the flash time line but this is the code from the first section, I had more errors but they were relating to my pre-loader which I deleted. I have failed at a few things in my code. Getting multiple images to load into a ui loader, creating a pre loader and making a "fluid" or "liquid" page.
ActionScript Code:
stop();
//stageResize
stage.scaleMode = StageScaleMode.NO_SCALE;
//stage.align = StageAlign.LEFT;
stage.addEventListener(Event.RESIZE, resizeListener);
[Code] .....
The website is here: [URL]. I only get the error in IE and my mp3 doesn't load when I click "on".
how to make a textlink go to a frame in my timeline?Without making a button? What I need it for: A text colum with multiple links � witch needs to be adjusted now and then. For every word that changes, I have to move all my buttons in the text field. If I could make the text in it self ("click here") contain the link it would be much easier.
View 1 RepliesHow do I make the main timeline jump to frame 1 when the mouse moves out of the entire embedded swf?
View 1 RepliesIs it possible to make the timeline run backwards through the timeline, so that I don't have to waste resources on reversing my scene intro animation later on in my main timeline? (imagine the intro is zooming into a book, then the reverse effect zooming out of the book).
I have been wondering this for a long time, but I assume that this is not possible.
how to make a button go to a specific frame on the main timeline my button called a play_btn and i want it to go to a specific frame on the main timeline ???
View 2 RepliesOkay my_btn will do this;
image_loader1.loadMovie("imagepath");
gotoAndPlay(frame#);
What i want to do, is, make it wait before it the timeline goes to the certain frame#, so the image_loader1 loads its image1. I'm making it wait, not because it takes time loading (which it would not, since image1 is already on the stage, loaded up in image_loader2) but the image still takes time to show on the image_loader1 (half a second).So, I want my_btn to be functioned like this that it performs its first action which is
'image_loader1.loadMovie("imagepath");' and then 'gotoAndPlay(frame#);'..
I want to make the timeline go to the next frame (ie gotoAndStop) only if two button instances are invisible. For the buttons I have scripted an on(release) to make them invisible, but I don't know how to use the if function to make my animation progress when they are both invisible.
View 7 RepliesI am making a website based in flash actionscript 3.0 i have a button nested in its own movie clip, because I have the button expanding to be able to read it i have figured out the only way to do this is by creating it as a movie clipa nd inside the movie clip creating it as a button. I added an event listener to the blog button by saying[code]...
i have named the symbol blog and have name the frame of where the blog page is going to be "blogframe" this line of code at the bottom is where i run into trouble the output window in Flash is saying "The blog button was clicked" just like i want it to. no errors are accouring why than is the playhead not going to frame "blogframe"? if the button is working when i click it the code is right i belive the problem here is it does not want the playhead to go to the frame i want it to. So i gues my question is, how can i make a button withing a movie clip interact with the main timeline?
When landing on a certain frame, I'm trying to make a MC jump randomly either forward or back ONE frame in the timeline. Can't get random(whatever); to cooperate.
View 1 RepliesI am trying to "gotoAndStop" on a frame in a nested timeline from the main timeline, but can't seem to figure out the correct way to write it with it's 'parents' etc... this is how I have tried which makes sense to me (have tried other ways too) but no success.
gotoAndStop(parent."framename");
I would like to store the value from combobox or text area-MovieClip in MyClass and then I'd like to read this from another frame in *.fla file only this :) have you another code? what can I write in frame 2 Miclass and frame 3
View 1 Repliesis there an action script code that enables the timeline to automatically enter a frame label on entering a certain frame.
View 1 Repliesi'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
[Code]....
I'm still struggling with going from a loaded swf to the next frame in my timeline, where a new swf file will be loaded.Ths is my current code which is trying to move onto the next frame in my timeline is located at the end Frame of a 10 second animation:
[Code]...
how do you do the following
A movieclip is playing...
When it reaches frame 20, it goes back and plays at frame 5. Then it keeps doing this. To me this is harder than it looks
why the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI've been looking for a tutorial to create a timeline scrubber (not animating specific movie clips, but actually a scrubber that can move along different keyframes of a timeline that has a series of images on it).I found a bunch of these (scrubber controlling specific movie clips): http:[url]....but nothing that allows you to just scrub back and forth on the whole timeline in the exported swf.
View 3 RepliesI cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
I am just trying to use actionscript 3.0 (Flash CS4) to change the 'Parent' timeline from a button in the 'Child' timeline
[Code]...
I have researched the subject for some time now and still haven't figure it out.I use midas3 library (Midi-actionscript3) to import midi to flash. I get each note-item on a timeline. I get the divisions value (192) and all of the "GET-TEMPO" elements are equal to 81.I tried a lot of combinations to get the actual time of the midi but still no good (timeline*192/60 for example).The reason I know it is not synchronized to the actual time is that when I visualize the notes as simple rectangles in flash - I check if they appear exactly to what the mp3 file plays (I have converted the midi file to this mp3 using simple conversion program)I have read a lot about how all is calculated but still haven't figure out the number I need to use to get it right (timeline * MysteriusConstant = ReaTIME, what is the value of MysteriusConstant? is it really constant? and if not how do I calculate how it is changed?)
View 1 RepliesI have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
I'm having some problem with the workflow of flash.I make web banners everyday att my work att it is important to me to have the banners easy structured so I can copy effects, tweens and symbols to a new banner. I have Flash CS3 pro.I always start by making a symbols. And then in the symbols own timeline I make the animation or effect.
The big problem I'm having is when I have the main (scene1) timeline with many frames, and then have symbols on that timeline, with it's own timeline with some frames. The frames in the symbol timeline is okey, but at the main timeline the frames is too short or too long so the animation of the symbol cuts of early or it plays more than one time (too many frames).
How do I calculate how long a symbols timeline should be so It maches the main timeline?What happens to me is that I always have to adjust the symbols timeline and the main timeline, and this I have to do many times.
so here's the function on main stage:
[Code]....
and here's the code that wants to call this function in a another movie clip. I've attached this clip dynamicaly to the main stage as well.
[Code].....
How can i acess slideImage function on the main stage. in AS2 _root.slideImage(btnNumber); would work. How Would I do this in AS3?
Why does a child movieclip only show the first frame within the IDE, regardless of where you are in the parent timeline?If you throw a movieclip with 25 frames onto the main timeline, which also has 25 frame, you don't see the nested movieclip's frame-progress while you scroll through the main timeline.Is there a setting somewhere in preferences or somewhere that will enable you to see a nested movieclip's frame position from the main timeline? Like you do with After Effects composites?
View 3 RepliesI have a main.fla which has 3 movieclips inside it. All 3 mc's have timelines that run 40 frames. The main.fla timeline has each mc instance on a frame. mc_1 is on frame 1 mc_2 is on frame 40 mc_3 is on frame 81 as the main timeline plays the clips each one fades to the other. I need to know how to target this scenerio after mc_3 plays I need to have a goToAndplay (20) set up so the animation inside mc_1 starts playing (frame 20) of mc_1.
View 5 Replies
