I hope I am clear enough. My data set is populated I have
comment:CommentVO;
comment.replies=[comment:CommentVO,comment:CommentVO,comment:CommentVO];
_comments:Array = [comment:CommentVO,comment:CommentVO,comment:CommentVO]
I've correctly populated my _comments Array and the replies array in my CommentVO Obj.
[Code]...
so I have writing a function that returns objects on the stage and puts them into an array. and the function works fine until i call the function on more than one object name, meaning if im in the root class, and I call this function on object1 lets say it will add all the object one's from the stage, but if i call it on object2 it will throw an error, which makes some sense, i guess it means that it is not adding it to a unique array, but im not sure how to do that. would it be a good idea to maybe make a multidimensional array? if that is the case would it be too slow?
[Code]...
I'm working on a script and I've run into a coder's writing block so-to-speak. I have an array of twenty object (with attributes). I want to loop through the array and for each object, update some text fields, create a tween, pause, and create another tween (i.e. fade in / fade out). I tried working with the timer class but the for loop, as expected, keeps on rollin' after the function has been called by the listener.
View 10 Repliesi have this from as2, where i can create many buttons on stage and loop. then create a function that applys to all the buttons
Code:
for (var i = 1; i <= 3; i++)
{
bt = this["button" + i];
[Code].....
I am just learning how to use Flash AS3. I have made a very basic animation that is a circle with a slice in it that grows larger over a couple of seconds until it is about a quarter of the size of the circle. It is designed for my research subjects to watch and follow for range of motion and speed as they complete a leg exercise task. I used a basic for loop in the animation to repeat it 10 times, then a frame appears that says "Set Complete." I would like to add a repetition counter to the screen so that subjects know which rep they are on throughout the animation. I know that I have to use a dynamic text box to do this, but I don't know where to put the script so that the new counter number will appear on the screen after each loop. Here is what I have so far for script:
Action Layer first frame of loop:
var count: Number=0;
Action Layer last frame of loop:
count++;
if(count<=9){
[code]....
I am wondering if anyone has experience this problem before:
[Code]...
I was experiencing some other "strange" behavior so I'm wondering if my code is getting too long. Maybe I'm running into some kind of limit. Has this happened to anyone else? Anyone know of some fixes? The loop is in a _global function, could that be causing a problem? other than that, the code is on line 4420 of the actionscript coding interface.
basically I need a loop within a loop to compare two different arrays in my actionscript3 lottery game. I have attempted the loop but I cannot seem to get it to work ...
[Code]....
So basically within this code check_win is a button. Once the button is clicked it runs the loop. It is meant to take an instance of matches which contains 6 properties and loop until index is greater than matches. According to my output this is happening but the second loop doesn't appear to do anything.
How do i word a for loop to make it loop through multiple arrays?I want 1 for loop to loop through multiple arrays in order to move/alter objects.I want to keep the arrays separate.
ActionScript Code:
characters = new Array();
characters[0] = male;
[code]........
I am making a 3d engine using formulas from a different language and its coming along nicely but I am having depth issues. How do I set the depth of an object within the script? I need the depth to change so I objects that are farther in the distance are further behind other objects.
View 4 RepliesI have a combination of movie clips, graphic and button objects that I want to appear in front of a movie clip that's being dynamically spawned through ActionScript.
Despite looking at various codes on how to go about doing this, problem is I'm using code somebody else made, so I don't know where to add the code to set the depth order for the spawned object. I'm not even sure which codes to use to achieve the effect I want.[code]...
im building a full as anything text-typing-component... easily modified and adapted etc...one problem however... i came across a depth issue in testing.... its a little peculiar so you will have to bear with me... i have 2 layers, called typer layer and plain layer... on the plain layer i have drawn out a shape... like a circle for instance.... if plain layer is on top of typer layer everything works fine. if plain layer is below typer layer the typer does not type.... it doesnt even show up....
[Code]....
I have three movieclips (used as buttons) on my main MC. The following code swaps the depth of a dynamically loaded image the when I rollOver each movieclip (button). I want to put the button.rollOver code in a for loop so I dont have to repeat this code for every image loaded.
[Code]...
I need to assing two dimensional with random numbers so i just try to do it in a loop, but it can not be done the way I show You below.[code]trying to run that code I just get an error...
View 1 RepliesI have a problem to use each code in for loop. I create 2 Circles in my stage with addChild code. And I gave them function ( mc.x += 2; ) and the time they get to the end of stage I gave the function ( mc.x -= 2; ) but my problem is when one of the circles get to end and wants to move to the right the other circle move with him to the right. and I think the each code in for loop helps me. but I don't Know how to use it in my actions.
my code is:
ActionScript Code:
var mc1:Circle = new Circle();
var mc2:Circle = new Circle();
[code]....
What should I change in this code to use each for loop..?
creating multiple arrays in a for loop? This doesn't work :
for (i=0; i<catNum; i++) {
var arr(i):Array = new Array ()
}
[Code].,...
Is it possible to have a for loop and create a new array for every loop
for
(i=0; i<5; i++){
myArray+i:array=new Array;
}
I know this doesen't work it just illustrates what im after.
I wanted to know if there's a way to add more options to a for loop regarding arrays. Say the current position in the loop is 1 (thats where my block is) then i want it to check the array if current position -1, +1,-3,+3. if any of these are null (thus, empty spot.) Because the block moves across a board i need the script to be adaptable.
View 3 RepliesI'm trying to display strings stored in arrays with a for loop, i could just write out each array like:[code]but it only displays the last one, is there a way to display it from 1-10, or 1-any number?
View 4 RepliesI have two arrays - one for movieclip buttons and one for images. The idea is - rollover a button and it loads it's respective image. I have a loop for the button array that pretty much loads each button and creates a rollover state for it. At the moment it just traces what button the mouse is over. The problem is trying to load the correct image based on that button. The way it is now - it will only load the same image for all the buttons.
Code:
tagPosition = 0;
viciousImgs = new Array("vaI1_mc", "vaI2_mc", "vaI3_mc", "vaI4_mc", "vaI5_mc");
viciousButs = new Array("va1_mc", "va2_mc", "va3_mc", "va4_mc", "va5_mc");
vicious = new Array("vicious_mc", "uTitle_mc", "uTxt_mc", "uButs_mc", viciousImgs, viciousButs);
[code]....
Is there a way to do this somehow?
Code:
var someVariable:int = 3;
for(var i:int = 0; i< someVariable; i++){
var mainArr[i]:Array = new Array();//I get an error if I try this
[Code]....
What I am trying to do is create an array of 12 out of an unknown number of thumbnails (there are 23 at the moment though this will change).So basically first 12 in array1, second 12 in array2 an so on until all thumbnails are in an array. So I need to create each array using a dynamic name, in this case 'pagearray' I.E pagearray1, pagearray2, pagearray3.
So here is the code I am trying though I have only managed to get the code to create the one array so far. The last one. This code is within a for loop that iterates through all the thumbnails.[code]...
I always seem to have problems when there are square brackets involved in naming things
What I am trying to do is dynamically name an array. I have been trying to do it like this:
ActionScript Code:
var myI:Number = 1;
var ["tmpAr"+myI]:Array = new Array(1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16)
[Code]....
I've have a question about dynamically accessing arrays. I'm going to have a number of arrays, char_a, char_b, char_c, etc.....
The values of these arrays will be used to load in other movie clips, x, y, scale, color, etc...
_root.char_a =[15,20,100]
I have a function to load in movie clip based on a given array, the variable I'm passing to the function is going to be a, b, c, etc... So if I pass 'a' to the function I want to load in the movie clip based on the values in "char_a", [15,20,100].
function loadCharLoc(name) {
x = this['_root.char_' + name][0];
y = this['_root.char_' + name][1];
moviename = 'grid_char_'+name;
_root.main_grid.attachMovie(moviename, moviename, getNextHighestDepth(), {_x, _y:y});
When I trace the values of x or y I get undefined.
So im recreating my ear training program with more effective coding so i can add on to it. original i did.
//88 C8
var mp3Req88:URLRequest = new URLRequest("88.mp3");
var mp3_88:Sound = new Sound();
mp3_88.load(mp3Req88);
I basically got 88 sound files (each note of the piano) doing this code 88 times for each sound. with mathamatical equations made my ear training program.
Is there a simpler way to import these sounds in a loop of some sort so i dont have to do this 88x for the piano and however many times for the other instruments i will be including?
thus var i have tried things along the lines of below with failure
var i:int;
for (i = 0; i < 5; i++)
{
var pianoMP3Req+i:URLRequest=new URLRequest("piano/"i+"mp3");
[Code].....
[code]In my real application, I've actually created a named array with element1 as key...so that I can address it directly by it's name.The problem is that - in my real application - the array2 element doesn't share a name in common with element1 (so I could address it by its name..as just told you,using named array) but with element5.
View 1 RepliesI have a array of categories, for e.g.
var categoryArray = new Array('value1', 'value2', 'value3');
I would like to loop and create new arrays from each of the values in the categoryArray I tried...
for(var i=0;i<=categoryArray.length-1;i++){
this[categoryArray[i]] = new Array();
}
value1[0] = "dsfsdf";
trace(value1[0]);
It doesn't seem to work.
I'm trying to declare arrays inside a for loop, then access them later as if they were declared publicly/globally. This doesn't work:
Code:
playlist = addChild(new MovieClip());
playlist.header = new Array();
for (i=0; i<3; i++) {
playlist.header[i] = playlist.addChild(new MovieClip());
or (j=0; j<6; j++) {
[Code] .....
How would I declare the arrays within the for loop, but still access them later without them becoming undefined?
I have a game where i add some cartoonish ants, that when they are clicked, they need to be removed from stage. There are 4 differend kinds of ants, so im doing a Math.random for picking which one to add. (ant 1+2+3 have 50% chance to spawn and 4th 50%) rnd_nbr = (Math.random() * 5)+1;
I have a timer doing 10 tick, and i reset the timer to make neverending. Then i have a math random and if sentences adding mc' to the stage with movement from Tweener, and event listeners for clicks. But i cant figure out how to remove them when clicked. I have done alot of failed tries right inside the click_candy_anty function. I've left them commented out.
[Code]...
I am trying to figure out how to dynamically populate textfields in Flash. The text in the fields will either say ON or OFF based on the value of bstatus.var bstatus will either have a value of 0 or 1 I have the following textfields listed below.I'm not sure if the syntax is correct, but I was thinking that the text fields would be in an array, and I would create a for loop--that will go through the array in order to have the fields populated.
var textFields:Array = new Array();
textFields[0] = compTxt.text;
textFields[1] = bathLightTxt.text;
[code].....
i need to dynamically create arrays with variable array names.
for example, something like this:
for (var n=0 ; n < nodeContainer.length ; n++) {
nodeObj = nodeContainer[n];
var name:String = nodeObj.nodeID;
[Code]....