I'm assuming this is flatly impossible, but has anyone ever heard of or seen a way to implement dual-audio output from within a browser, a la DJ software (user's hardware allowing)? Anything in Flash? Google searches don't seem to be giving me any love on this...
View 2 Repliesi need to play back mp3 file in flash. but i have more one output device installed in my pc. the question is:-
can flash list all (detects) audio output device installed in my pc then let me pick one of them to play back sound by selected output device?
Not getting any audio output when viewing video in flash?
View 1 RepliesIs there a way to change flash players audio output device? if not, is there a swf player who has this possibility?
View 2 RepliesIs there a way to disable Flash Audio while i'm using My Winform application which has a WebBrowser Control (gecko(firefox) and WebBrowser control IE)? I would block only flash audio inside the webpage(where i navigate) not all the sound of my application.
View 1 RepliesI have swfs for every letter of the alphabet containing a story and a song. And one swf as a loader for each letter as requested from a menu. These are then published into html.
Every file is working as normal individually and when loaded in the loader swf.
But when viewed in a browser the audio karaoke for the letter I is out of synch. and only the letter I. this happens locally and online.
The I.swf file individually and when opened in loader swf work fine. Its only happening when viewed with a browser (IE and Firefox)
all the audio are mp3 loaded from external files. But Ie also tried placing the audio in the swf timeline but the same problem occurred.
A co-worker thought it might be the file size or bit-rate of the mp3 but thats not the case because all the audio files are the same compression and bitrate The file size of the audio or the swf are not the largest in the collection either. So this rules out swf/mp3 file size and or mp3 settings.[FONT="] Im really stumped by this, because every other letter works fine, and as far as I can see they are all the same settings.
I am having a problem trying to record internal sounds made from the flash file.I can record sound from the microphone no problem,What i want is to be able to record the sounds from the flash file without isung the microphone etc.
View 2 RepliesI'm writing an application with AS3 and Flex 4 for Adobe Air 2.0RC and I seem to have run into an interesting predicament.
I am aware of the microphone class and the method to capture recording from them to a byte-array, I am wondering, however, if there is a way to capture another source of audio, say, from an output on an external sound card.
Is anyone aware of an AS3 method of capturing sound from an output?
Im working on a project where we need to capture a 5 sec clip of whatever is being played through the users line-out (audio).
Is it possible to do this reliably through a browser (using flash/silvelight/js..) ?
I'm currently working on a project - an online education system, and I need to make it possible for studs to introduce themselves in a 30 sec audioclip. I need to implement it with Adobe Flash. The problem is that I have no idea how the Flash + Red5 duo work together. There aren't that many helpful recourses online, at least for me since I'm a beginner at Flash. (I do mostly PHP stuff.)
1) When you connect to the server, how do you make it record audio from flash client? 2) After 30 secs, how do you stop recording and save file in a specific folder on a server?
Basically I want to recreate a sound installation that I made a couple of months ago which used Logic Express and a Tape Delay effect to take ambient sound captured by a mic, delay its output by 3 seconds, and then play it into the headphones. All without recording anything and in realtime.I've basically got this far, which lets me hear the mic input through my headphones loud and clear. Now all I want to do is apply a 3 second delay to the input before it outputs. Do I have to send the audio to a buffer where it can be constantly stored and rewritten?
Code:
//Create a new Microphone
var mic:Microphone = Microphone.getMicrophone();
[code].....
The old way to allow audio to be played/streamed in the browser was a flash button, such as that seen on [URL]. What's the new iPhone-friendly way to give the ability to click on a simple button to listen to an audio file in the browser? If the answer is HTML5, is the such a button built and available? I don't need an MP3 player with steaming and such, only a button.
View 1 RepliesHow can I set up something similar to the output window in my browser. I know I can feed a var into a textbox. How can I set it up so that the values of several vars just keep adding to a list as in tracing to the output window. I want to do this as I am having a problem that only occurs in the browser, not locally. I suspect because of the different speeds at which things occur. I am not throwing any errors. I am running the flash debug player.I set allow debug, hoping that would give me an output in the browser, no such luck.
View 1 RepliesI have windows xp - home SP3. 32 bit.I have Flash player 10.2r153.Why is it that my flash player have dual frame on every browser that I used(ie. explorer, mozilla, chrome, opera , safari)
View 3 RepliesHow do I get the dimensions of the monitor the user is watching the video with if they have dual monitors? If I use this --
mc_videoDisplay.height = (Capabilities.screenResolutionY - 26);
mc_videoDisplay.width = Math.floor(mc_videoDisplay.height * 16 / 9);
it's only using the primary monitor so it's all out of whack if they're watching on the extended monitor.
I use a dual-boot computer, with one partition for Linux (Debian) and one for Windows XP. I can't use Flash on Linux as Adobe has never ported it to that platform. So I put my Flash on the Windows partition.Unfortunately, while I have no trouble with Flash 8 on the Windows partition, when I attempt to open Flash 9 on it it crashes the entire system.
My husband found an article in the Winter 2009-2010 issue of 2600, the Hacker Quarterly magazine; it seems that in CS3, which Flash 9 is part of, Adobe has written its copy protection code in such a way as to cause a dual-boot machine to become unbootable after one uses Adobe software.I don't understand all the technical issues, but as the article states, "even though you have paid Adobe real money for their software, they will still potentially ruin your dual-boot system."
I realize Adobe doesn't consider Linux users numerous enough to accommodate,but by taking my money for their product,the company has an obligation to give me value in return.The value I expect is to be able to use the software I paid for - it's not up to Adobe to decide which OS I should use.At least they could warn people that you can't use CS3(and probably not CS4) on a dual-boot system.I will now start learning to use Inkscape immediately.
In the Tut: Photo Gallery using XML and Flash, the image is faded to 0 BEFORE the next image is faded to 100. Is it possible to get the imcoming image to fade in WHILE the outgoing image is be faded out?
function nextImage() {
if (p<(total-1)) {
p++;
[Code]....
If I import an FLV video is there any way to remove the audio, put the audio into a byte array, and then re-add the audio to the flv video?
View 1 RepliesCant figure this out, got it to work in firefox a while ago but after upgrading to mac and chrome, I had no luck finding an solution.
View 1 RepliesHas anyone seen a Flash video player out there that will load and play two videos at the same time, such as for comparing videos? A potential client is looking for something along the lines of this. I've not been able to locate anything out there,and I'm wondering if there's a usability reason for this...Obviously, you wouldn't want the audio playing for both at the same time, and the bandwidth issue for something like this might be a concern too. My feeling is that you wouldn't want to restrict a user to just playing both videos at once, but give them the option to play them separately or at the same time, with controls for each audio and playback.
View 1 RepliesI am using the FlvPlayback class to show movies. The full screen feature works since I am just calling the method defined in the class. My issue is whenever I make it full screen on a computer that has 2 monitors, the full screen flash player always ends up in the primary monitor. When that happens, I notice that the location where the flash player was in the other monitor is empty. How do I prevent this from happening and force the video player to remain in the monitor it was originally in?
View 7 RepliesWhen viewing the .swf file inside a web browser, the audio file does not work. The sound does not get played. However, when double clicking on the .swf file, it works fine with the sound.
View 40 RepliesMy client needs to let a user record a message from the browser, then export the message as an audio file (e.g., WAV).How is this best accomplished? Flash, Java, HTML5? By best, I mean something that is straightforward to implement and also broadly supported.
View 3 RepliesI'm recording a mono audio stream using a PIC at 8-bit 8Khz and streaming it raw to another microprocessor that houses a web server.I'm currently buffering the data and turning it into a wav file that gets played in the browser.What I'd like to be able to do is continuously stream the audio as it's being recorded without putting a lot of encoding overhead on the second processor.I've been searching but most searches turn up just streaming from a stored file, but since the file size isn't known ahead of time I'm not sure how to do this without the overhead of mp3 encoding.
View 1 RepliesI'm trying to code my flash file so that the html will pause all swfs AND audio when the tab is out of foucs. I found this code on[URL].._and_VBScr ipt_Injection_in_ActionScript_3 and it works,but not completely. It only pauses the movie clips that are in the Flash file and not any that are exteranlly loaded with audio included.
[Code]...
I'm trying to code my flash file so that the html will pause all swfs AND audio when the tab is out of foucs. I found this code on [URL] and it works,but not completely. It only pauses the movie clips that are in the Flash file and not any that are exteranlly loaded with audio included.
How can I adjust it to pause the externally loaded swfs that are loaded to a mc within my main movie clip and the audio OR what should I use in place of this code? Someone mentioned on a different post that I needed to use a window.onblur funcition, but they didn't give details.
import flash.display.MovieClip;import flash.utils.setTimeout; // This is a more "safe than sorry" setting, since multiple domains// have entry into my site. Can be removed or hardcoded if you feel// secure or insecure, as you see fit.flash.system.Security.allowDomain("*"); // Throw any errors around to make sure somebody actually gets
[code]....
I'm recording a mono audio stream using a PIC at 8-bit 8Khz and streaming it raw to another microprocessor that houses a web server. I'm currently buffering the data and turning it into a wav file that gets played in the browser. What I'd like to be able to do is continuously stream the audio as it's being recorded without putting a lot of encoding overhead on the second processor. I've been searching but most searches turn up just streaming from a stored file, but since the file size isn't known ahead of time I'm not sure how to do this without the overhead of mp3 encoding.
View 2 RepliesI'm using jPlayer in a website, which is a cross-platform/cross-browser jQuery solution for audio and video playback on a website. On my website, I will have users upload files either in MP3 or OGG format. I wonder though... in order to truly stay 100% stable on any browser or platform, wouldn't I need to support a corresponding OGG for every MP3 uploaded (and vice-versa)? I know jPlayer uses HTML5 when it can and will fall back to Flash when necessary, but I didn't know if you need to have that file in both formats to have it play everywhere. If I need both file formats then I suppose I'd have to convert the file to the other format using a server-side conversion. If I need just one format... then wouldn't that be just dandy! So my question is, do I need to convert? Or not?
View 1 Repliesvar nextY = 0;
var nextY2 = 18;
for (var count = 0; count < result_lv.typeCount; count++)
{
[code]....
The type count is correct but the information for the project is wrong.
I have created a container in Flash Professional CS5 for my project's CBT. I've been able to script many of the features we require using AS3, but there are a couple of things I'm still trying to work out. I would like the swf presently playing in one tab to pause and go silent when another swf is opened in a new tab (the sound is inside this externally loaded swf which is loaded inside a movie clip from buttons nested a movie clip down). I've tried :
var originalFrameRate:uint = stage.frameRate;
var standbyFrameRate:uint = 0;
addEventListener(Event.ACTIVATE, onActivate);
addEventListener(Event.DEACTIVATE, onDeactivate);
[Code].....
This function is present when I publish the CBT with Captivate, so obviously there must be code available. You can set the Captivate button to open url in new window and pause movie. Is there something I can add to the html file that is similar to the "has Priority" for mobile devices or is there javascript that can be added to the flash itself?