I'm developing a chat system and i need to detect the FlexClient disconnect in Java, using the longpolling channel. I can't use the Streaming channel, because of some bugs that this kind of channel still has. Do you have any suggestion on how could i accomplish this? I'm using BlazeDS.
View 1 Replies
I'm using NetConnection, NetStream and a flash.media.Video control to play back video files stored on the local machine. Works great for FLVs, and for H.264-encoded MP4s, but for non-H.264 MP4s, I often get audio, but no video.
I realize this is to be expected. What I'm wondering is whether there's a way to reliably detect that the video portion of the file is unplayable, irrespective of the audio. Of the many events available in NetStream, and even in the client callbacks (onMetaData, etc.), I don't see anything that explicitly informs for an unplayable video track -- I see NetStream.Play.NoSupportedTrackFound, and NetStream.Play.Failed, but for these videos -- i.e., playable audio, non-playable video -- I don't get either one, presumably because the audio works.
when I'm streaming in live :a. FMLE is disconnect for couple seconds (10 -30), stop encoding and then renew the connection and the encodingb. In the same time, I can see users (streams) are disconnecting/ disappear from the console.As said it can happen once in a session, but this disconnect most of the users and they have to refresh their browserto get the live session again.Currently I'm using FMSS 3.5.4 r210, Linux redhat 5.2,6 Intel(R) Xeon(R) CPU 16GB.I found a post named "FMS disconnect from FME" (Jun 7, 2010 3:36 PM by BJWP Ltd)
View 2 RepliesI am using BlazeDS. Does anybody know how to disconnect client from server? Client must be informed about this event.
View 1 RepliesI have a publisher who publishes a netstream using stratus p2p. This is then connected to by player who subscribes to the netstream.
I believe one can reject the subscriber when the stream tries to connect by using the onPeerConnect method of the netstream's client. However, I would like to boot the subscriber after they have been connected.
There are potentially other subscribers to that netstream so I cannot just close it. How would I boot a particular subscriber without closing the published netstream?
I have developed a simple chat room but how do I go about showing who is online and what happen if the user close the web browser without disconnect, will the user name in the online list be remove immediately? I use mx.messaging.channels.StreamingAMFChannel and set <subscription-timeout-minutes>3</subscription-timeout-minutes>
View 1 RepliesI got a mxml file that launch a script on my http server through a HTTPService.send() call. Since the script on the server side takes a LOOOONG time (it could take even more than a hour) i would like to drop the connection between my air application and server when a button is clicked. Don't know why but calling HTTPService.disconnect() is totally useless... No tcp connection drops and script keeps on running on server side. No HTTPService.cancel() nor set HTTPService var to null worked.
View 1 RepliesI'm using a Amf channel , How to add security to My channel..
View 2 RepliesIf you subcribe a Consumer in Flex, you need to assign a ChannelSet to the Consumer. In my case, I create a ChannelSet and then add a Channel to that ChannelSet.Apparently, the added channel is the current channel of the ChannelSet. But what if I would add two Channels to the ChannelSet? Do I need to set the currentChannel before subcribing?If there are two channels in the ChannelCet, and I trigger the login method on the ChannelSet, will both Channels be authenticated and connected?
View 1 RepliesI have a swf which, for some reason, has four RemoteObjects pointing to the same ChannelId, but they are listing that channel as being at two different spots. In four of the five RemoteObjects, everything behaves as expected, but in the fourth (WidgetService), the version on dev is switching from dev.context.root toloc.context.root. To make matters more confusing, it only does this on the dev server (QA and production are fine, as are local builds).The relevant information from the config files follows:
#This is from build.properties, which is used by Ant
#to build the swf on the server
flex.sdk.dir = /path/to/sdk/flex_sdk_3.2.0.3958
[code].....
I am encountering a weird problem. I have a flex application that calls a HTTPService from another domain to retrieve some data. I have created a crossdomain.xml in my flex application with <allow-access-from domain="*"/>.
When i run my application http:[url]...., i can retrieve the data without error.But if i run my application http:[url]....., i encounter the Channel.Security.Error.
I have an application running on flex and php, connected using amfphp, i added a secure channel to services.conf of amfphp [code]how do i know if flex is actually using this secure channel? i tried [code]from the php side and they are both false ... but if i remove these checks it works fine, I'm using wamp, with mod_ssl, and working from localhost
View 2 RepliesI am using Flex and php to develop my project. Everything works great in my local machine.However, when I upload my files to my serverI got the error when loading my flex application.The pop-up error message is
send failed
channel.connect.failed.error
Netconnection.call.Badversion: url:
[code].....
I have made a little mashup mixing maps, translate api and flickr. I get the directions from my map and make mp3 files on the fly to play them at the same time but they only play in firefox and for the rest of the browsers I only get my first sound channel with background music. can't figure out why.
[Code]...
I am connecting to a BlazeDS server with a simple Flex component that is merely trying to subscribe to realtime dataHere are the Channels and Consumer
<mx:ChannelSet id="channelSet">
<mx:AMFChannel url="http://localhost:8080/MyApp/messagebroker/streamingamf/"/>
</mx:ChannelSet>
[code]....
I have implemented the login capability to my application using Flex(Blazeds)channelset login. But there is a strange problem, after about 2 minutes of inactivity if I try to perform any operation I see that my channelset has been been forcefully logged out Is there some configuration which I need to do in order to prevent this from happening. I tried adding this in my web.xml, so that the session persists but it didnt help my cause.
<session-config>
<session-timeout>10</session-timeout>
</session-config>
i need to connect to two different domains from a single flex application. the problem is the domain other than the current hosted domain is unable to login. letz say i hosted the application at LOCAL server. im able to login to the local server . From the existing application i need a login to the MAIN server too. The problem comes up here. flash security is not allowing login to MAIN server. in crossdomain we allow-access-from MAIN server. but i want access to the MAIN server from LOCAL server. is ther nything i need to put extra in [URL]?
View 1 RepliesI tried to deploy my otherwise working flex app on a web server (tomcat 6).It threw a Channel.Security.Error.After some research, I became aware that flash movie loaded from flash_movie_domain will not be able to load resource from any other domain.Some suggested adding a crossdomain.xml.However, the crossdomain.xml route doesn't quite make sense.In this case, I am loading resources from a third party web site.My understanding is that I need this third party website to include a crossdomain.xml on their root directory in order for app to function.The third party web service is provided as is. I will not be able to change what's given. Since the third party is providing public access, it already explicitly give permission to the general public. Adding a crossdomain.xml to their root seems to be a redundant act?
View 1 Replieswhen i do this locally on tomcat server on local development machine it works fine when i brought it over to linux im getting this error.i dont know what to do anymore it should be straight forward but i'm having no luck. i do have a web.xml and i see a broker for my remote access so i just dont know what it could possibly be
View 1 RepliesWe are new to FMS and have just deployed a FMS 3.5 for a live streaming project.but I seem to be getting a bit of an issue where the FMLE seems to disconnect and reconect to the FMS several times.but some times the FMLE seems not to be able to reconect back to the FMS. I read somewhere that this bug have been fixed with the FMS version 3.5.3 updater.also I can see the client still connected afoter they drop connection on the admin console.I dont mind setting up the updater but just want to be sure this would fix the problem as I have live web TV on the FMS.Also is there a way to update without loosing all the config? FMS running on Windows 2008 server R2,4mbDual Zeon CPU
View 5 RepliesAfter 5-10 minutes of use my application disconnnects all users....does anybody know some general causes of this or how do i fix it...........in the server logs i get code 600 normal disconnect.
View 1 RepliesI have an fms app which won't disconnect people in IE unless they close the browser completely. Simply going to another url in the browser leaves their name in the peoplelist. I've tried everything here without success. Even IE 8 shows same problem on Vista. IE on XP works fine as well as some versions of IE on Vista.Firefox, opera, chrome all work fine everytime.The problem, it seems, is IE won't "leave" pages until it's closed no matter what.
View 3 RepliesWhen a user refreshes the page in IE9, the disconnect handler isn't called. So in an application like a fms lobby, a user seems to stay in the list when he actually isn't there anymore.
View 2 RepliesI am using FMIS 3.5.3 (Linux) to fork an RTMP stream from FMS to two different CDNs. My FMS application does roughly the following:1) Client.prototype.FCPublish() creates two NetConnections, one for each CDN2) Each NetConnection's onStatus() creates a new NetStream object if info.code == 'NetConnection.Connection.Success'3) The stream that's supplied to FCPublish() is attached to each NetStream4) .publish(stream.name, "live") is run on eac
View 5 RepliesURL...I am running application instance that implements publisher/subscriber on video streams. Application code is very thin and can be removed completetly if required. In a specific time, randomly, disconnect messages stopped happening which causes the folowing:
1. Streaming service shows decrease of bw per second
2. Users count is increasing linearly.
3. No disconnect messages apears on access.0x.log
The following site only works if you are offline.[URL].. So how do they do this. I have even seen YouTube do something similar. just open YouTube and disconnect net and refresh. You will see the page below.
View 4 RepliesWhen streaming a live event through FMS 3.5, is there a list of guidelines or best practices to handle the situation when the stream disconnects and should reconnect.Basically, what I do now is wait 20 seconds after the initial disconnect, then close the stream and ask the user to ty to reconnect to the stream again.
View 3 RepliesI have a problem where I'm streaming a video via RMTP from akamai for a video serving site and an issue has come up during QA where a user starts a video stream and then disconnects their internet connection, which causes the video player to go into the buffer state. The problem occurs when they reconnect their internet connection and we'd like to pick up the stream again.
View 1 Replieshow to clear the client entry from Adobe flash Media server 3.5. when net disconnect.i was expecting that on netdisconnect from the client side end(which is connected to FMS) its onDisconnect event fire similarly as it fire for browser close.But when internetdisconnect ondisconnect event not fires at FMS side is there any way to overcome this or any other event fire at that stage?
View 6 RepliesIf my ComboBox is editable how can I tell if a change event comes from a change to the TextInput or a change in the selectedIndex of the drop down?
Is there a way to check for this in the event object?
