how can I make the green movieclip rotate in the point that the claw has catch it. To give an impression of physics. Here´s the image, to give you an idea:
The point (x,y) that the claw catches the colored movieclips below is not unique it can be any number. As long as the claw catches the colored movieclip.
I have a MovieClip, that is representing a character in my game. Id like to "create bullets" shooting out from the tip of my characters gun. Problem is that when my character turns around, also the point rotates around the MovieClips pivot.
Is it possible to anyhow easily track this point, so that I could dynamically create new objects at the same location.
I tried to add a new MC as a child to my character, with the initial position at the guntip. In some systems child-objects "follow" their parents around, but it didnt seem to work here.
Is there any other "native" way of doing this, or do I just have to have a Polar-coordinates representation of the point relative to character-MovieClips origin, and add the MC rotation to theta, so that I can calculate the X and Y coordinates?
I am trying to make a line point to wherever the cursor is when I stumbled upon the Math.atan2(); function. It appeared that i would put
line.rotation = Math.atan2(1,1);
to get 45 degrees or pi/4, but I was wrong. It barely moved the movieclip at all. So what I'm trying to do is to get this movie clip to rotate along with the mouse so the line is always pointing at the cursor. Also, how would you get movieclip to move along the line created by the line of these two points?
concept I can't wrap my mind around.If you've been the the sitehe has a "picture map"I've seen this used at other sites too.But what the rotation. The pictures always rotate around the point you click on.I just don't get it. I understand the momentum and all for the swing though
View 1 RepliesLine is defined by two 3d points; (0,0,0) and (x,y,z). And there is also this 3d point. How can rotate this 3d point around the line?
Something like this (points indicate vectors in my expression, it's the same thing) :
I found some stuff on the internet but I couldn't really figure it out.
how to do an effect like the one seen on this page?: http:[url]....
View 1 RepliesI searched online and found this script that is supposed to rotate and image but I'm not sure how to use, where to put in the degree angle that I want my sprites to rotate by. Also, I get an error. 1084: Syntax error: expecting identifier before leftparen. 1084: Syntax error: expecting rightparen before leftbrace.
var point:Point=new Point(spr_box.x+spr_box.width/2, spr_box.y+spr_box.height/2);
rotateAroundCenter(spr_box,45);
function rotateAroundCenter (ob:*, angleDegrees) {
[Cde].....
I'm working on creating an animation in which there are insects randomly moving around - based on tutorials on this site. Does anybody know how to make the insect rotate so that it always points towards the direction of travel.here's what's on my movie clip:
Code:
onClipEvent (load) {
scale = (random(100)+50);
this._alpha = random(50)+20;
this._xscale = scale;
[code]....
I'm actually coding this in Java (with which I have just a few days experience), but as far as the logic goes, I thought this would still be an appropriate place. I'm making a Tetris-eque game and having trouble with rotation. Each shape (rectangle, L, "step", etc) consists of 4 or 5 smaller squares (image below), and I want to be able to rotate the pattern of squares 0, 90, 180 and 270 degrees around a designated point.
x = originX + cos(angle) * radius;
y = originY + sin(angle) * radius;
I thought I understood these, but apparently not, since I can't seem to get it working� For each shape, I would declare the x, y coordinates for each of its smaller squares, relative to one another. Then, I'd send these values to a function that should take the pattern and rotate it according to the specified angle. In Java (to the best of my knowledge), the upper-left is always the "registration point" for graphics. So, I set the relative coordinates for the squares of each shape such that the left side of the leftmost square is at x = 0 and the top side of the uppermost square is at y = 0. Here's an example, the shape of a plus sign (+).
Code:
//top-center
x = squareWidth;
y = 0;
[code]....
no rotation (just the shapes)and this is what happens when I implement the rotation adjustment.
What I'm trying to do is make a dial-type of interface, where you click on a point on the edge of a circle and that point will rotate to another point at the top of the circle. What I can't figure out is how the make "Point B" rotate to "Point A", where "Point A" is always fixed at the top of the circle and "Point B" (and Point C and Point D, etc...) are located along different points on the edge of the circle. I'm using the tween function to rotate, so what I need to figure out is how to get the difference in the rotation between the two points.
View 7 RepliesI am trying to rotate some points around the center of the circle(0,0), however I'm getting weird values from the output. I've commented the problem code..
Code:
var r:Number = 10;//radius
var y:Number;
var x:Number;
var a:Number = 90;//angle of which the semi-circle is facing.. could be a random angle.
var ax:Number;//rotated points
[Code] .....
I am using the semicircle in BitmapData collision checking with getPixel(), with a moving circle...
I have a set of links (movie clips) arranged in a circle. When one of the links is clicked, I would like the circle of links to rotate until the selected link is in a certain position - straight down (90 degrees) in this case - and the others to maintain their positions relative to the clicked link (ie: they all move, but the distance between them is maintained). The behavior is intended to be like a bullet rotating into a chamber on a revolver, or - more accurately - like that of a Ferris Wheel. [URL] Here is my mangled version of the AS from the site linked above:
ActionScript Code:
// setting variables
var centerX = Stage.width/2; // Stage Center X
var centerY = Stage.height/2; // Stage Center Y
[code]....
I have a slider which I want to use to rotate an image around it's center. This normally is easy but my problem is the clip is made dynamically and the size changes so I can't use the default registration point and I need to assign the center point before I rotate it. I found the rotateAroundExternalPoint function which rotates around a center point fine. How to get it to rotate to a certain angle and then have it stop at that angle. The rotateAroundExternalPoint increments the rotation rather then allowing me to set the angle to rotate to. Is there anyway that I can set what angle to rotate my clip to? It right now increments the rotation by the x coordinate of my slider bar (slider_position.x).
Code:
import flash.geom.Matrix;
import fl.motion.*;
var mat:Matrix = clip.transform.matrix;
addEventListener(Event.ENTER_FRAME,EnterFrame3);
function EnterFrame3(event:Event) {
var center_point_x = clip.height / 2
var center_point_y = clip.width / 2 //
MatrixTransformer.rotateAroundExternalPoint(mat,center_point_x,center_point_y,slider_position.x);
clip.transform.matrix = mat;
}
I've been trying to figure this out for a while now and cannot get it to work. I have a movieclip that can be moved up, down, left and right with the arrow keys, and reflected/flipped using the arrow and control keys together. However, I want to be able to use the arrow keys and shift to rotate the movieclip about a point with x co-ordinate 230 and y co-ordinate 180, regardless as to whether or not the movie clip has been moved up, left, etc.I've tried several different codes based on examples I've found online, but none have worked. I cannot make sure the centre point of rotation never changes.
View 0 RepliesHow to make a point rotate about the circumference of a circle upon dragging. How do I go about doing it? Is there something to do with the
startDrag(...); ?
From what I have right now, I can move the point but not on the circumference of the circle.
I want to be able to rotate the ship around the center point and be able to update the .x and .y at the same time.I've got this two versions of code.1
Code:
if (aKeyPress[38])
{
[code].....
It's been a long time since I've done any work with actionscript, and alas I've forgotten nearly everything. I've tried to look for a tutorial that would explain basic animation with actionscript, but the one that I found on Kirupa was no longer there.
Basically I'd like to do this:On the stage I have a movieclip and I'd like the movieclip to move along the x-axis to a certain point and then back to the starting point again. The moving speed of the movieclip should also be adjustable.
I have a circular diagram with approximately 8 icons around the outter part of the circle. These points are all buttons. When Clicked, I want the diagram and icons to animate round to the top point (360 or 0 degrees). Then, when another icon is clicked they will all move round so that one is at the top.It would be a great bonus to have a slick easing in motion too but not essential - just a 'nice to have'.I have looked over forums and responses and there is quite a bit of info on this but I'm finding it difficult to apply it to this particular project.
View 2 RepliesI have a horizontal scrolling movieclip that scrolls when the mouse is left or right of a certain point of that movieclip. However, it only moves slightly then stops when the cursor goes over it, it doesnt actually scroll normally...
[Code]...
i have 2 intersecting movieclips.
is there a way to hit test point NOT detecting a bottom movieclip if the mouse is over the top movieclip?
im using CS3, AS 2.0
how do you rotate the position of one MC to another. for example a triangle, i have one mc that rotates to face the mouse position but i want another mc to rotate towards the player
I'm trying to rotate a movieClip from it's original position, to a random anglehere's what I have:
function getRandomNumber(min:Number, max:Number):uint{ var randomNumber:Number=Math.round(Math.random()*(max-min)+min); return randomNumber;}
particles.rotate(angle:getRandomNumber(0,180));
[code]........
I have been trying to convert this effect into AS3 but have been having majour issues : rotate clip
I have an object (class) with a handle, when dragged I would like the clip to rotate with the mouse (much like rotating an object in photoshop). I have put my code into an ENTER_FRAME event, and have been using a matrix object to do my rotation (is there an easier way?)
Code:
private function rotateClip(e:Event)
{
myMatrix.rotate((Math.floor(180*Math.atan2(mouseX,mouseY)/Math.PI)+90));
[Code].....
was my attempt at converting the code from the example link. I've also tried various other methods using trig to no avail.
How do I make an mc constantly rotate? I know this must be simple but i dont know how to do it. I just want it to rotate around its middle. How would i do this?
View 1 RepliesI've created some code that rotates an arrow up or down when the user clicks on it, depending on whether the timeline is on frame 1 or 5. The problem I am encountering is that rather than rotating visually, it just flips to the correct degree (in this case, 0 or 180).
Code:
function turndown():Void{
for(i=0; i<16; i++){
this.upDownMC._rotation += 11.25;
}} function turnup():Void{
[Code] ......
How can I rotate a movieclip so that when I move it, it will rotate slightly depending on the angle of the ground. The only thing I can relate this too is the old school sonic games. How would I find the curve of the ground and apply it the moving character?
View 8 Repliesa movieClip that contains a polygon and some circles at the angles of the polygon. I want to use the circles as rotation handles.Now the code below works but it terribly, terribly slow.I've seen a couple of other examples of rotation using the mouse position, but I want the polygon to rotate via the handle; I think that means the angle of rotation needs to be updated each time the mouse moves.Is there a cleaner/more efficient way to do this?Also, this works only for one direction right now no matter the x/y direction you move the mouse.
public function mouseDownRotate(event:MouseEvent):void {
// get the global x and y of the dragged piece (offset so it looks like it's rotating around the polygon's center
[code]......
I have a movieclip that I am using greensocks transformManager with so the user can rotate, skew, and scale the clip. This works fine, but I am trying to add a crop tool. If the image is rotated, when I send the image to the crop tool it measures the height of the image by the bounds of the rotated image, not the actual height of the image if it were square (re: not rotated).
So, what I tried to do what, after sending it to the crop tool, rotate it back to 0 before getting the bounds using this code:
[Code]....
I don't understand the math here. Shouldn't it just rotate 3rads in the positive direction to equal it out? How would I return it to 0;
I am working on a snowboarding game, And have two points of collision detection on the board:
x-----xOne at the Front of the riders boardOne at the Back of the riders boardThese two points of collision are placed within the rider.movieClip, and not on the _root timeline, as the rider movieclip can rotate etc as it rides through different gradients of slopes. I have used a largely basic method to obtain the X,Y positions of each collision point, using the following method:
Code:
var backX:Number = _root.rider._x+_root.rider.backDetection._x;
var backY:Number = _root.rider._y+_root.rider.backDetection._y;
(The same for the frontX and frontY) As you can see, it simply adds the offset of the detection points positions from the riders x, y therefore when the rider movieclip is rotated during gameplay, the rotation is not accounted for and it still searches for collision in exactly the same positions.
I am using this for collision checking:
Code:
this.hitTest(backX, backY, true)
Which is placed on the ground movieclip (what the snowboarder is riding on). Any better way of doing such collision checking, or how to account for rotation? is localToGlobal() the answer?
Any way to rotate a movieclip to face the mouse location?
View 1 Replies