I created flash buttons for a website and imported them into dreamweaver, put the site up and everythings working finee, EXCEPT, the mouse down feature of my button doesn't play all the way unless you hole down the mouse button. My mouse over feature works fine.
View 1 Replieslook at the footer below, you'll see a circle around your head. That's your head. If you hold mouse button the MC plays. NOW...if the field vision (green thing) touches your head WHILE holding mouse button...it sends you to frame 2 or choose your own.
View 7 RepliesIs it possible to create a button that when you press it and hold it, it will play a sound, and when you release it then stops the sound?
View 2 RepliesI've got a symbol on stage and a button. The button rotates the symbol CCW half a degree. Code: on(release){ mySymbol._rotation -= 0.5;} I wanna add an on (press and hold) action on button so that the symbol will be rotated continuously when the button is on hold.. I can't make this work for over a week now.
View 7 RepliesI'm making a menu. It consist of three mc's (btn1, btn2 and btn3) and two squares The two squares rescale horizontal in different directions depending on the button that is presses. When the squares come to an hold there is a little gap between them underneath the button that was presses and the button is going 20 pixels down into that gap. Below is the code I have used:
Code:
MovieClip.prototype.yPos = function(y){
this.onEnterFrame = function(){
this._y += (y - this._y)/3;
[code]....
When the movie starts everything is fine. First the two squares are rescaling. When that is done the buttons are fading in and finaly btn1 is going 20 pixels down in to the gap. But what I would like to accomplish now is that when btn2 is pressed that first btn1 is going back up again when that is done that the two squares are rescaling untill the gap is below btn2 and that after that btn 2 is going down 20 pixels.
And that is where I have problems. Point one when I don't know how to integrate a if (if used) in the button event, so everything is going to move at the same time(btn2 already moves before the squares are in place and the squares are already moving before btn1 is back up again) and secondly the way I have it now btn1 is indeed moving back up again, but after that its up it also going back down again.
here is my code,
[Code]....
This is running on Enterframe but I want to ratate 180 degree and on button press and hold button
I have a very simple piece of code but it has one very annoying bug. When I press the button a second time, the code doesn't work. The only way to get the code to work is by moving the mouse a tiny bit, or moving the mouse off the button and back on. make a button that can be clicked many times without moving the mouse?
Code:
randommultiquiz.onPress = randommultiquizOnPress;
function randommultiquizOnPress() {
_root.attachMovie("connect", "newconnect", 200);
newconnect._x = 0;
[code]....
So I did a tutorial on advanced buttons and I followed them to the "T" and I got the point where I am to hit CTL-Enter and it opens up into a small view window but when I run my mouse over the button the action doesn't ocure. Everything else works exactly like it's supose to except that.
for a browser I use firefox, Windows XP Pro, NVidia FX520 graphics card, quad core CPU,
I made a nav bar, and when you are over a button it has the "DOWN" state. Test it works, roll over and see down state. I put this nav bar (as a movie) call it NAVI, into the main movie. Test it works, roll over and see down state. Now, to NAVI I assign this code
[Code]...
I have a splash page with a logo. When the logo (splash_btn) is clicked I want it goto the site (frame label: home). All my code seems to be right but the button doesnt work.
[Code]...
I'm experiencing an annoying issue with a movie clip button. The movie clip is linked to a class which adds a rollover and rollout effect. The issue I'm having is that, even though the button is in frame 1, the button doesn't react to the mouse for some seconds into the movie. The only thing I can think is that it's the class itself, but I'm not certain. Here's the class:-
[Code]...
i was doing tutorial from the page [URL]
my problem is that I have in main timeline movie1, who have movie2 in side, and movie2 have movie3 inside it. in movie3 is buttons like in the tutorial. so i try to replace _root with _level2 but doesn't work on mouse button AS.
[Code]....
I have three buttons on screen that navigate to different places on the timeline. I have set them all up as buttons using a generic button in the library and then given them all different instance names. I selected the button and changed the text colour for each state in the timeline (up, over, down) to keep it simple. The buttons are all, as far as I can analyse, identical in all but instance name.
When I test the movie, the first button changes text colour on 'over' and, when I click (i.e. down state) the colour changes again as designed. The navigation action doesn't occur until I release the mouse button, giving the feel of having 'clicked' the button.
With the other two buttons, which have been set up as far as I can tell in exactly the same way, when the down state occurs, I see a momentary flash of the text colour change and it performs the nav straight away. I really want it to perform the same way as the first button but cannot for the life of me see why they're behaving differently.
I'm building a photogallery base on this tutorial http:[url]....I'm trying to add a play button, so the gallery would play the pictures onRelease of the button at interval of 3s.It's not working. my code is:
playBTN.onPress = function() {
this._alpha = 50;
setInterval(this, "nextImage", 3000, 1);[code]....
I have a button, in default, and rolled over state, it has Movie Clips. however, when entering the scene, the Movie Clip in default state of a button is playing. what I want to do, is to somehow stop the movieclip, and have it played ONLY when mouse rolls out of button. So put in simply, Movieclip is frozen in button, point on a button, leave button, movieclip plays. Is it possible? P.S. This is what I have right now [URL]
View 9 Replieswhen i press on Button and hold down i want to increment.[code]
View 6 RepliesI am trying to figure out how to make a script that allows you to click a button, and once it is clicked, the button remains in it's over state. Then, when another button is clicked, the old button that was in its over state reverts to its off state, and the newly clicked button then appears in an over state. How would I do this?
View 1 Replieswhen i press on Button and hold down i want to increment _global.lines
nextline_btn.onPress = function() { if (_global.lines<25) { _global.lines = _global.lines+1; txt_lines.text = _global.lines; }
Im new to AS3 (like 5 hours new) and Im after getting stuck with something Im sure is very simple, but Im just not having much luck finding a solution. Basically I have a button which I want to click and hold and then make a movieclip move up and down the y axis. This is what I have so far...
[Code]...
Im sure Im probably going about it in a bizarre way, Im just trying to do it in a way which makes sense to me. So far its working fine for single clicks, so I click the button and the "upwards" function is called which moves the movieclip upwards by 10. The problem Im having is getting it to move continously when the button is clicked and held. Ive read a few possible suggestions relating to loops and setinterval but I just cant seem to make sense of them in a way that applies to what I want to do. Apologies if this is really simple but Ive literally been teaching myself actionscript for all of about 5 hours in total so far and I just cant seem to get past this hurdle.
I am trying to move a shape across the screen incrementaly as someone holds a button.This is what I have so far.
on (press) {
shape._y -= 5;
}
This works but I have to press the button about a hundred times to move the shape across the screen.
Button a, when pressed triggers a few things. I triggers a mask to tween in to uncover some text. But the movie will only play as long as i have the button pressed .
View 4 RepliesI've created an image with a dozen irregular buttons. It all works perfectly. Now I want to edit my flash cs5 file in a way so that, when clicked upon one button, the last of the 4 states (the hitbox state) will remain visible until one clicks another button. Now its looping back to the fist state. Im sure there must be an easy way to do this, something with a stop code maybe?
View 4 Repliesfor(var l:int=0; l<anXML.length(); l++){
[Code]....
Currently building a dynamic menu system, with 3 levels of navigation. Currently when mouse children is set to 'true' it doesn't want to remember the name of the menu item created. it spits out, 'instance263' or whatever the number is when I trace it out with my onClick event. With mouseChildren set to 'false' my 3rd tier of navigation ceases to work.
The Goal here is to have the menu items retain an instance name so I can relate back to them and set active states for the current active module. UPDATE: Here is where the problem arises
[Code]....
How do i make it so you have to hold the button down for a amount of time before going to next frame?
View 1 RepliesI have a simple message-board, that dynamically loads text from php and a text file! I have created an up and down button to scroll the text box when you press it! This works fine, but I cannot figure out how to keep scrolling the text if you hold the button down. here is my code for the down button (all my attempts at looping etc I got rid of):
[Code]...
I have 3 flash button, and a touch screen LCD.how can I detect if user has touch + hold the button for 5 seconds?how to use timer + mouse down + mouse up for this?
1) mouse down
2) start timer (count 5 sec)
3) mouse up
4) user hold button for 5 sec detect
I have 3 flash button, and a touch screen LCD.how can I detect if user has touch + hold the button for 5 seconds?how to use timer + mouse down + mouse up for this?
1) mouse down
2) start timer (count 5 sec)
3) mouse up
4) user hold button for 5 sec detect
So if you press and hold a button, it does the function once, then waits 0.5 of a second or so then repeats the action quickly. How do I remove the 0.5 of a second wait?
View 3 RepliesIve made two simple up/down buttons, that "scrolls" a loaded movie by the following code (lets say the movie is loaded to level 5):
_level5._y += 5;
Very simple.
Well, Id like to be able to hold down the button and have the movie scroll continously, like the scroll++ code does for textboxes.Is that possible?
So I had an interesting request from a client the other day. Basically, he wanted the button (which looks like a sticker) to peel off as the mouse approaches the button. So from the outside of the hover point, it would peel a little. As the mouse gets closer, the peel animation would peel more (or less, depending on the mouse position) until it is 'peeld' off the page and sort of hovering above the background when the mouse is finally over the button.
Does anyone know of some custom classes that might achieve this? It seems like it would be making use of the new 3D in flash10, but I haven't had much time to experiment with 3D in flash.