ActionScript 2.0 :: CS3 Tween Doesn't Work First Time, Works After That?
Jul 22, 2009
I have a box ("bg_box") that I resize and move up and down using the tween class based on what button you select. Once it is resized the text ("textBox") for that box fades on. It works fine on all the other buttons except for one! I added in a scrollpane with a strip of photos ("gross_scroll") on the button that doesn't seem to want to work. It is just a basic _alpha tween so I am not sure why that would cause a problem.
The weirdest thing is that it only has an issue the first time the button is clicked. It skips the tween and just jumps right to the size and position it should be. Once you click on another button and click on the troublemaker again, it works just fine.
Here is my code:
Code:
easeType = mx.transitions.easing.Strong.easeOut;
var box_start = bg_box._yscale;
var box_end = 100;
I am new at flash CS4. (Upgraded to Flash CS 5 but this gives other problems in the meantime I continue with CS4)I have created webpage. Within the web page I have created Motion Tween with Motion editor and once previewed, it works fine. Going back to the stage and previewing the result shows the initial position of the Motion tween but it doesn't move and behave the way it shoud. What's missing? Where am I going wrong?
I have a presentation with two set of buttons.Clicking on the set which is on the Frame (2) Should redirect to the set of buttons Frame (3),(4),(5),(6),(7)As you can see in the image, the (2) gives the order to go to the next (3) and it works.But when it goes from (2) to (5) or (6) or (7) then the second set of buttons don't work anymore.[URL]
I prepared a footer for a website and have the following issue:There are two buttons on footer bar that interests us. One is fullscreen - clicked activates fscommand function. But fscommand works only when I debug my fla. Otherwise, nothing happens. There's an additional variable that shows if fullscreen is active - nothing happens.There's also a "coder" info. I wanted to use navigateToURL function for "mailto:..." adress, but nothing happens, even if if changed it to [URL] adress. Also debugger doesn't activate it.I tested it in browser, completely nothing happens. There's the code, works without any "addons":
trying to create a character selection screen type thing works fine on my computer but when i load it to internet characters dont load up dont understand why characters and profile images are external image files so i think that reason why its not working is because the swf is trying to display the image before its properly loaded up
so im thinking perhaps if i add some sort of bytes total/bytes loaded script where its trying to load up and display the image it will check if the image is fully loaded before it tries to display the image think that will work ... if that's what the issue is but not certain.
addChild (pant1); var pantMovX:Tween = new Tween(pant1,"x",Regular.easeOut,mouseX,600,1,true) ; var pantMovY:Tween = new Tween(pant1,"y",Regular.easeOut,mouseY,290,1,true) ;
I have made a simple animation using only the timeline. The animation is covered by a button "Knapp" (alpha 0) wich activates the actions. The whole thing works fine the first time. The last action says go to and play frame 2, wich has two actions: stop + go to and play frame 4. But this action does not work the second time. I tried to set the action to frame 3 instead of 2 and the same problem occured on another action on the timeline as well.
Here is the last action on my timeline:
Knapp.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndPlayFromFrame_11); function fl_ClickToGoToAndPlayFromFrame_11(event:MouseEvent):void{ gotoAndPlay(2);}
I have built this AS2 game that uses quite a few classes and library symbols.It works fine the first time you play the swf. But if you try to do the whole ctrl + ENTER in the Flash IDE, it doesn't seem to load any of the assets that are dynamically attached to the stage.This also happens if you have another swf use loadMovie to load it.I have all the dynamically attached symbols assigned with the linkage and set to export on the firstFrame. There is an include .as file on the first frame of the fla.
I have a MovieClip with two buttons inside of it (bottom portion) When I mouse over the MovieClip - it rises up, to revewl the buttons. My problem is, when I mouse over the buttons, the movie clip drops back down. The buttons don't have any actions upplied to them... It acts as though buttons were standing between the cursor and the movie clip... The idea is to hower over the movie clip > reveal the buttons > either move mouse away or click on one of the buttons. However, the movie clip closes when I touch either one of the buttons. Below is the code and thnks a bunch ahead of time:
The first half of the tween doesn't work but the second half does. It only does this when I add the code link._visible = 0;. This is to make the alpha completly disappear.
I am using System.security.allowDomain in both files.The tween in movie2 fails to work when the swf loads from an external domain. However, it works perfectly when this swf is loaded locally. Also strange is that the movie2 tween does work externally if the tween libraries are commented out of movie1.The Challenge: Get both the red and blue boxes to fall when movie2.swf is loaded from an external domain.[code]
I decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code: var i:Number = 0; var myInt:Number; var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
I'm working on creating a new look for my portfolio and had a concept.I would like have one movie clip tween in real time 365 frame increments, while another moves in real time minute or second increments.Along with this, I would like to be able to override the passage of time by scrolling an associated scrollbar.The two tweens would be independent of one another.
I have a button object that I need to scale to align with the variable width of an array of images.However, when I set the width in code, the button does not actually become that width. Tracing out the width gives me the correct value, but on screen.. it's off.
I've proved it to myself by scaling the same button object manually in the properties pane and visually comparing. Both of the buttons below have a width of 410.
I used the Fuse example he posted and started to convert it into a class. Here is what I came up with, which works great. However, as you can see in Main.as, it only works one instance at a time, and the last instance that gets called to tween in the onRelease is the one that works.I'm only attaching the two classes that make this run as it depends on some other classes that i have linked up as libraries in eclipse and I don't want to put together a whole package of it, but if its absolutely necessary then let me know and i'll repost a package of files.
I have a few words written in static text mode which I have made a graphic symbol. On the timeline I have used both motion tween and classic tween to create a aplha change from 0% to 100%.I made sure I have enoough space on my timeline (10 frames).The aplha tween works fine in preview mode however when I export the swf the aplha tween is no longer working? I have tried breaking the text,restarting flash,restarting my computer and similar suggestions from other blogs such as:
I was able to solve this by checking the box "Use runtime bitmap caching" under Blend in the properties panel for the MovieClip in question.I am currently using Flash CS5 on a imac.
Im doing a project that works with lots of tweens im having always the same problem when i call Tweens to execute in the same frame..The Tween most of the times freez before this motion end.I fixed the tween for the background... but for that i had to put the tween in another frame and call that frame from my home Frame..Now im trying to do some Tweens with some buttons, but it most of the time freez before the motion ends.Should i forget to use Tweens in the same frames?
I created a custom google voice callback swf so someone could put in their phone number, and google voice will call them and connect them to me (essentially calling me). Everything works fine when i run it from my computer, but when I put it online it doesn't work.
The way it works is you put in your own phone number and name, then click call, and it rings the phone of the phone number you put in. This doesn't happen when accessing it from online though.
I've provided a link to the fla for your view, and I'll also post the embed code I have on my site.
I've made a file in photoshop with layer. I brought it into flash. I created the movie and it plays but when I want to use the "test movie" feat. it does nothing. The graphics come up but no movement. I exported it as an .swf file but still no luck.
my code is listed below. basically, i wrote this code to generate a rectangle that surrounds the movie clip called 'SELECTED' along with a small square that appears at the bottom left corner of the new rectangle.this new rectangle + tiny square are supposed to act as resizing tool for the movie clip 'SELECTED'. hence, if i press and drag the small square, the mc SELECTED should get resized accordingly. that is happening to some extent, except that when i release the mouse button, neither the onRelease nor onReleaseOutside function gets called.
if website is opened as [URL] so this URL works fine- URLRequest("[URL]"); BUT if opened without WWW as [URL], this URL doesn't work. If I change link in url without www than works. HOW TO CHANGE SCRIPT OR TO ADD URL TO MAKE THIS CONTACT FORM WORK WITH WWW AND WITHOUT
I also applied a trace statement of "Working?" within the MenuScreen class file and it shows up before the error does! (Even though I don't click on anything...)
I'm working with flash CS4, with an adobe air file with as3, doing a desktop application to use in Windows , I google about information, but only find answers for web.I'm using a flvplayback, and when at source property add a local path as C:folderVideomyvideo.mp4 ,everything works fine, but when source is a server path from other computer as therpcfolderVideomyVideo.mp4 , doesn´t works. I'm not if a flvplayback bug.I have always the possibility to make a map folder, but this application is for a client, and if I can solve if add new map folder, it's better to me.
I'm currently having an issue with FMS4 developer edition on both Linux (x64) and Windows XP (x86).When I stream a webcam using ns.publish("foobar", "live") I can watch the live stream on another client, however when i use ns.publish("foobar", "record"); neither broadcasting nor recording works.Using the "live" parameter the client appears in the log files and in the administration console as "publishing", using "record" the client appears as "idle".Is there anything I need to configure besides LIVE_DIR in fms.ini?
Is this a restriction in the developer edition? Here is the relevant part of the code (condensed):
-------------------------------------------------------------------- var camLive:Camera = Camera.getCamera(); var nc:NetConnection = new NetConnection();[code]............
When I press CTRL + Enter inside Flash CS4, my movie exports perfectly. No errors.However, when I quit flash and load my movie or when I upload my movie on the internet, there are some mysterious errors (mostly null object references right from the start).
