ActionScript 2.0 :: [FMX] Sequence Of Functions?
Apr 15, 2004
I'm making a menu. It consist of three mc's (btn1, btn2 and btn3) and two squares The two squares rescale horizontal in different directions depending on the button that is presses. When the squares come to an hold there is a little gap between them underneath the button that was presses and the button is going 20 pixels down into that gap. Below is the code I have used:
Code:
MovieClip.prototype.yPos = function(y){
this.onEnterFrame = function(){
this._y += (y - this._y)/3;
[code]....
And that is where I have problems. Point one when I don't know how to integrate a if (if used) in the button event, so everything is going to move at the same time(btn2 already moves before the squares are in place and the squares are already moving before btn1 is back up again) and secondly the way I have it now btn1 is indeed moving back up again, but after that its up it also going back down again.
View 2 Replies
Similar Posts:
Jun 25, 2011
I want to have a series of functions that execute one after another instead of one within another.
here's what I mean
[Code]...
View 2 Replies
Nov 5, 2006
I have three functions like this;
[Code]...
What I need is to make them run in a sequence, someone have a clue?
View 4 Replies
Mar 8, 2012
in my application, I did some trace statements of a file For example if(oldFile.parent.toString()!=file.parent.toString()) There are some other file print statements , and it seems to encounter this error stated below. But the error does not appear every time. For example i ran my application for 20 times, it will encounter this error once. Error: Error #2037: Functions called in incorrect sequence, or earlier call was unsuccessful. at Error$/throwError() at flash.filesystem::File/resolveComponents() at flash.filesystem::File/get parent()
View 1 Replies
Mar 4, 2007
I have some code that is connecting to a radio stream and it playing the music. That much works... I also have a little dropdown box which lets the user switch the stream... Whenever I try to switch the stream, I'm getting this error...
Error: Error #2037: Functions called in incorrect sequence, or earlier call was unsuccessful.at flash.media::Sound/flash.media:Sound::_load().
Code:
private function changeStation():void
{
sound.close();
I have tried to modify that block of code, but I can't seem to get anything to work...
View 10 Replies
Oct 6, 2011
I have a series of calculations i'm doing over a bunch of objects stored in a array. Each function is pretty CPU demanding but if you only run one function, it just works fine.
[Code]...
View 2 Replies
Jun 6, 2010
I've got a project thats getting a bit big, so Im taking the actionscript out into separate as files. I want all the basic functions to be in BasicFunctions.as and the make a library for more specific functions. I find that a lot of people use the import statement but I cant get that to work with a simple Hello World trace, yet the include statement works fine (see attached). I understand that import/include work differently, but which is the better method? If import, then is that heavier to work with. Any rate, what's the best way to organise code when it gets to the 1000+ lines?
[Code]....
View 9 Replies
Nov 4, 2009
I'm trying to find a way to have global functions in my as project, similar to how flash does with stuff like the util functions (describeType()...), where you can just call the function wherever you need it. For example:
[Code]...
So when I call Test(), it prints out "hello world" fine. My problem comes in that I can't change the name of the Test function, and I can't add any other functions without compiler errors. Is it possible to have a load of global functions in one file, or do I have to split them up into separate files like in the example? Also, I know that I can make a Global class and call static functions like Code: Global.doSomething() but I'd like to know if there's a way to do it as flash does it (describeType(), getDefinitionByName(), etc), or rather, how does flash do it?
View 9 Replies
Nov 25, 2010
Is it not possible to call other functions from generic mouse event functions?
Code:
_root.myButton.onPress = function(){
hide();
[code]......
View 6 Replies
Jun 17, 2004
I have one function that puts text in a text field and makes a button goto a url onRelease.The code is like this:
Code:
item.onRelease = function() {
myButton.onRelease = function() {
getURL("http://google.com", "_blank");
}
talk = this.txt;
}
the only problem is that the button doesn't work onRelease. i think that it is because there are too many functions there, but at the same time,
View 5 Replies
Dec 2, 2004
in this example why the values of (12) and (21,39) are lost at the geo and geo1 functions
[code]...
View 11 Replies
Oct 25, 2011
Im adding lot of simple functions to prototypes of top level objects ( Object , Array , String ...) and have 2 questions :
Is possible to add functions to top level's classes in compile-time ?
If not , is there a way to allow this functions to compile ? I dont like to turn off strict mode
ex:
string.removeWhiteSpace();
string.sliceStr("." , "end");
textField.scrollBottom();
this return compile-time error , cause there is no such function , i have to write it in braces :
string["removeWhiteSpace"]();
string["sliceStr"]("." , "end");
textField["scrollBottom"]();
and i like to aviod it )
View 2 Replies
Mar 16, 2003
Is it not possible to call other functions from generic mouse event functions? Surely it is !!??ie....
Code:
_root.myButton.onPress = function(){
hide();
[code]........
View 11 Replies
Jan 14, 2011
Functions embedded inside other functions? In all my years of ActionScript programming, I've never seen this (this is part of legacy code written by someone else which I am adapting):
[Code]....
View 6 Replies
Mar 19, 2010
Its a complicated senario for me. I have a sound management singleton with an asset like dictionary storing all referances to my urls and assets and the guff inside it-
I have a function called addItem(id:String, url:String):Object
I would love to do something similar as soundManager.addItem(id:String, url:String).play() or soundManager.addItem(id:String, url:String).stop() of which it'll both add my item to my dictionary, and begin playing the sound
[Code]...
View 2 Replies
Dec 27, 2009
Let's I have a class Square that has a several functions. I want to call it from a class Grid, which is a group of Squares.So in the class file for Grid, how would I do this:
Code:
public function doSquareFunction(thisFunction:Function):void{
square1.thisFunction();
[code]......
View 8 Replies
Nov 9, 2005
I have a function with 4 necessary arguments (aka parameters) in order to perform the actions. I would like to have the ability to pass the same function to itself as an argument (sort of like a recursive function) along with its arguments. Basically I want to "base" to engage an onMotionFinished event handler if there is another function passed as an argument. Something like...
[Code].....
Would there be a way to use listeners to do this or the AsBroadcaster?
View 6 Replies
Jun 17, 2004
I have one function that puts text in a text field and makes a button goto a url onRelease.The code is like this:
Code:
item.onRelease = function() {
myButton.onRelease = function() {[code]....
the only problem is that the button doesn't work onRelease. i think that it is because there are too many functions there, but at the same time, i think it's just me..
View 5 Replies
May 14, 2009
how to swap to a new keyframe from a animated sequence. I'll try to explain clearer if I can. I have a button that when clicked on an animated sequence starts and the panel slides along which is fine but I can't seem to click on the back button to start a reversed sequence - I want it to slide back to the start page... so the user can click back and forth.
I've uploaded an example - squidgeye....co....uk if you click on the 'hello' button then click the arrow the sequence starts - I got the back button to have a slight colour change when the mouse goes over but that's it! I'm now stumped... and it's really annoying! I have the initial page on keyframe 1, then the animated slide on keyframe 2 - I was trying to put the reverse animated slide on keyframe 3.... but I'm now confused... I'm sure there was a better way but I'm a total newbie
View 4 Replies
Dec 15, 2009
I have a peice of video that I exported as a swf from after effects. Now that i've imoprted it into flash it's broken down into a squence of images. The problem is I need to move the video (Pics) but obviuosly I can only move 1 image at a time and that's a real pain as there is nearly 80 of them. I really need a way of moving all of them at the same time. Highlighting all the frames and moving them doesn't work.
View 1 Replies
Jan 17, 2010
I am working on a big project today and I'm importing images in by the hundreds. Is there an easy way to import an image sequence into the timeline? I remember there use to be with earlier versions of flash but I can't figure it out for CS4 - Luckily these images are named sequentially.
View 3 Replies
May 25, 2011
I'm doing a presentation where it loads different swf files in sequence. I already have a holder with width = 819, height = 614. Right now, I'm loading 1024x768 swf files in it.
This is the code in use:
loadMovie("movie1.swf", holder);
holder._width = 819;
holder._height = 614;
The swf file is loading in the correct position, but when I test play it, the first one [movie1.swf] loads and plays in it's original size [1024x768], then the following one [movie2.swf] loads and plays the way I want it [819x614]... Then when the whole movie loops again, now, the first one [movie1.swf] plays the way I want it to.
View 2 Replies
Jun 20, 2009
How can I create animation in sequence? As soon as one motion ends, how can I get a second motion to begin? I would like to make item 1 move and then item 2 move. etc, while item 1 disappears or remains stationary.0
View 1 Replies
Jul 13, 2009
Let's say I have 2 buttons at the beginning and 2 different endings, but same sequence in the middle, how can I click on button 1 > same middle > ending 1 ; as well as button 1 > same middle > ending 2. Surely I know I can do it by duplicating frames, however it seems not right if I have more buttons and more endings.
View 3 Replies
Jul 20, 2009
From some reason when I'm importing a PNG sequence onto stage, it's loading all of the PNGs into one frame instead of distributing them into their own keyframes like it's supposed to. I've seen this problem posted before. Anybody have a solution for this? I've also seen that people have posted that Flash CS3 HATES After Effects PNGs....how bizarre....I'm starting to figure that out.
View 3 Replies
Nov 14, 2009
Let say, I am loading xml file. And I have done addEventListener for Event.Complet. while xml is loaded, After completion of complete event, I declare I passed value to my attribute but it does not show in.
E.g.:
....this is a class main
var keyword:KeyWord = new KeyWord();
View 3 Replies
Feb 10, 2010
I've been working with AS3. The crux of the problem is that before I run a function I need to know that certain conditions have been met, for example loading my config.xml and putting it into a class variable. Where I run into trouble is that URLLoader is async so I can't put code after the load, the only thing I can do is put it in a lambda on the listener.
var conf:Object = new Object();
var ldr:URLLoader = new URLLoader();
ldr.addEventListener(Event.COMPLETE, geoLoader, false, 0, true);
ldr.load(new URLRequest("[URL]"));
function geoLoader (e:Event):void {
[Code] .....
This worked great for short bits of code, but I've got a bunch of functions that are relying on huge amounts of preconditions (this pollutes the namespace if I use the first method) or functions that rely on one bit of the stack (which means that I can't use the second method even though it's slightly more obvious to me). So, my question is: How do flash professionals handle preconditions? I'm trying to find a solution that allows tons of preconditions as well as a solution that allows different orders of preconditions or just a few preconditions from a group.
View 3 Replies
Feb 27, 2010
I want 2 swfs in a sequence.I tried one techinique wherein on the last frame of the first swf i have put the followig code
stop();
this.createEmptyMovieClip("mc_holder", this.getNextHighestDepth());
mc_holder.loadMovie("first.swf");
the problem is that it works fine when I export it to swf but when i export it exe format It does not play the first swf and instead directly plays the second swf.
View 0 Replies
Dec 23, 2010
trying to use a CallAction in a Sequence?the effect I want is to rotate a shape on the Y-Axis while fading the shape to invisible...then adding a new shape with alpha at 0...then un-fading the new shape to visible...then stopping the spin...
so...I'm creating a Sequence, adding a Parallel, then a CallAction, and then another Parallel...seems like the elements in the Sequence should run one at a time, in a serial fashion, in that order they were added to the sequence...but the CallAction always runs before the first Parallel completes.why is the CallAction running out of order?
here is the code:
ActionScript Code:
<?xml version="1.0" encoding="utf-8"?>
<s:Application frameRate="50"
creationComplete="creationComplete()">
[code]...
View 4 Replies
Jun 8, 2004
I have a main movie with 12 buttons (numbered 1-12), each button loads the relevant swf into a blank 'content' MC on the main stage.I also need to have 1 button called 'start' which plays whichever swf is due next. ie; if you are on swf no. 3 pressing start will load swf no. 4. I guess a simple way would be to have the 'start' button tell the 'content' movie to go to a certain frame which has an action on it to load whichever movie is next... ?
View 2 Replies
