How do I do mask preloader? I've created a 100 frame preloader but I do not know how to write the mask preloader. I've successfully created a width preloader which is start from left to the end of right. but is not masking. Here is my 100 frame preloader [URL].
View 1 Replies
I just started working on a preloader screen that includes a preloader mask over a logo and a percentage dynamic text. I can get either or to work but not both at the same time. I notice that if I remove stop(); I can get the percentage to work but not the preloader image. With the stop(); embedded the image preloader works but the percentage doesn't.
[Code]....
I want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie
View 4 Replieswhy my key frames are disappearing when i turn my shape tween into a mask. I have shape tweened a mask ontop of a tree branch and all the frames are there as a plain shape tween, but when i turn that layer on as a mask the key frames go blank..
View 3 Replieshow to create a mask like this with ActionSript.It looks like a curtain opener and i would like to do this completely programmaticly if its possible.I am using TweenLite as my Tweening Framework.[URL]
View 0 RepliesI have followed a tutorial for creating a preloader and it works perfectly - until I try to move the MovieClip to a mask layer. I'd like to use the mask layer to incrementally expose an underlying MovieClip, but when I change the progress bar layer to a mask layer, it fails. The following line produces a #1010 error:
ActionScript Code:
preloader.progBar.scaleX = _loadPercent;
progBar is the MovieClip in question. Preloader is in the root. As long as the layer is not a mask layer, it works - just not like I want it to. How does the code have to change to recognize the object in a mask layer?
So I've made a circular preloader made with some shapes and masks. Everything like this works. What I want to do now is add a movieclip of animations to the stage and make it look like this movie clip is in the progress circle of the preloader. So what I did is create a movieclip container to hold all of the shapes that animate on loading. I then used that movieclip container to mask the movieclip of animations.What happens when published is the movieclip of animations (the particles) loads over the shapes, but all of their masks are gone. So it's as if when I applied the mask to the container, all of it's children and their masks stopped working. Is there a way to correctly do this?
View 2 RepliesI'm trying to make a preloader with a mask effect.
preloader.zip
I need the animation to follow the path the right way - from point 1 to point 2. Of course this is wrong now because the mask effect isnt well done.
I'm trying to make a preloader with a mask effect.
preloader.zip
I need the animation to follow the path the right way - from point 1 to point 2. Of course this is wrong now because the mask effect isnt well done.
I have a preloader using a mask, set to slowly reveal the target object from the bottom up as the movie loads. But there is something off with the code and I'm not a programmer.
View 8 Repliesi found out when i add a dynamic mask to my preloader progress bar (for transition out) its not scaling correct. I think its because my bar isn�t tweening to the correct "stageWidth" during progress until it completes. I setted it up like that:
// Preloder Progress Bar
Code:
bar.scaleX = 0;
bar.graphics.beginFill(0xff3333,1);
bar.graphics.drawRect(0,0,stage.stageWidth,4);
[code]....
Somehow it looks like 100% of the loading progress doesn�t represent the entire stageWidth so my bar animation finishes some pixels before reaching stageWidth end. NowJust noticed it now after adding a dynamic mask to my preloaders progress bar.
I'm trying to use the tutorial found here: url...for my site. I always thought that this tutorial looked easy and recommended it to many friends. But now that I'm using it myself it seems to jump to 7% and go from there.
View 2 RepliesI have a preloader using this script:
[Code]....
I want a mask to go over some words in relation to the percentage of the file loaded. Below it I want text that says 1%, 2%, 3%, etc. (also in relation to the percentage loaded). But when I test it and click "simulate download," the screen stays white for about 10 seconds then goes to frame 2 where my content starts.?! I get no errors, either. PS: on Flash CS5, is TLF text the same as Dynamic? For "percentage," the only two options are Classic and TLF...
I've been reading a Flash book, and it tries to explain how you can use Action script to create a preloader that will play a movie clips frames based on the amount of bytes loaded. I can't seem to get it to work.
Here is the code:
stop();
myInterval = setInterval(preloader,10);
function preloader() {
if (getBytesLoaded()>=getBytesTotal()) {
play();
clearInterval(myInterval);
} myMovieClip.gotoAndStop(Math.round(_framesloaded/_totalframes*(myMovieClip._totalframes)));
}
This is on the first frame of my movie. I've also have a stop action on the first frame of my movie clip. I've attached the FLA for dissection....ts?
I have a CS5 FLA file with AS 3.0 with the following code for the preloader:
var pct_load:int = Math.round(framesLoaded/totalFrames*100);
if (pct_load == 100) {
play();
[Code]....
The preloader is in the first four frames -- it's just the background photo, a graphic logo, and the loading numeral text.
Everything runs great the first time it's loaded; then if you refresh the page, the graphics in the first four preloader frames flash on the screen before the movie plays.
my preloader starts at 55 percent. this is because the first frame (if i can trust the bandwidth-profiler) has a size of 32 kb. i think this is strange, because the b-profiler also tells me the film has a total size of 35 kb. after the first preloader frames are some small files with transitions only, and then there is the main frame, which has a size of 18 kb my preloaderframe only contains a small bar and a dynamic textfield, just like the tutorial says... i ve already searched the forums, i found that quite many people have the same problem, but i didnt find any solution... i do not load any swfs dynamically. the only thing i can imagine that could cause that problem is the embed font which i use for the dynamic textfield in the preloader. is that possible?
View 8 Repliesi've alredy made game in timeline, and i havent made preloader. if i try to insert 2 frames in start, it will change my entire game codes.
View 2 RepliesI have a startDrag function set up on a loader and mask that when the mouse is down on the loader it drags, when not it doesn't. There is also 2 buttons that control whether mask1 or mask2 is used. What i would like however is when the mouse is down - the area of the loader outside of the mask is visible but only by about 10/20% alpha, that way the user can see where all the image is while dragging. Is this possible? Full code can be seen below and i have attached the zip with the .fla file:
[Code]...
what i am doing is to make something along the lines of the "scriptable mask" tutorial Inigo was kind enough to put up.My idea is to have a large mask behind the whole of my flash site, this masks a colour image with a black & white one (nothing tricky). The image I am using is actually 5 separate images combined, and each is a pic of certain parts of the site.I also have a very basic set of buttons along the bottom... each corresponding to each section.
All I want is to set it up so that when I mouse over the buttons, the _x of the mask moves to correspond with the correct image... really very basic... or so I thought .If anything it should be easier to do than what is in Inigo's tut (where he uses the _x of the mouse to move the mask)... i just cant seem to get it to work with a nice easing effect (its easy to get the mask to simply snap to each coordinate, but I need it to smoothly move).
maybe point me towards a better way to mask. png file is way too big. I have been using the mask layer option to create my own mask around a jpg image by drawing around it on the mask layer. There has to be a fetter and faster way to do this. Is it possible to maybe have a specific color range have an alpha value of 0. Similar to green screening whereas If I put the item I want to clip on a green background flash will auto take out the green for me. and by auto I mean action script maybe. I think this can be done but im not finding it.
how are these guys clipping these images [URL] they have the movie clips set up where the black background on the 3 layers of shoes is getting masked out. When I go into the shoe movie clips I see there is a black background but it just disappears when I go back to main timeline.
ive gotten one movie clip to mask another in the actions frame but i cant seem to be able to mask the flames which are a shape with a movieclip in this as file. im not getting any errors but the mask isnt covering anything look near the bottom at s.mask=mask_mc; there are about 20 "s" shapes spawning per second if that has anything to do with it
Code:
//this package turns an mc into a flaming button that calls a javascript function
package
{
import flash.display.MovieClip;
[Code].....
I was wondering if its possible to mask multiple MC or Sprites under one mask, when using AS3.abc.mask = a;cba.mask = a;something like that
View 2 Repliesthere seems to be no accepted method of playing multiple flv using buttons. My latest attempt has me putting multiple instances of the flvPlayback component in different frames and using buttons to navigate to those frames. It works but nothing anyone has posted anywhere will result in removing the flv when you go to a different frame and instance. This was simple in AS2. Load movie to a traget and each time you load a new movie the other one goes away. REALLY goes away.
View 7 Repliesbasically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 RepliesI have a function that counts days and some other variables and displays the values via dynamic text.
[Code]...
I have to place the incrementCount(): function every 12 frames so that it increments the values. Seems like it would be easier to simply modify the script to count "every 12 frames" but I can't find anything that tells me how to "count frames" in flash. Seems to be this is probably basic but I've searched unsuccessfully....so how do you do this. How do I get my script to work so it's frame based so I don't have to put incrementCount() every 12 frames?
Is it possible to have an movieclip of about 50 frames and navigate between these 50 frames? As if u put a marker on frame 10 and one at frame 30 and if u use a button it plays to frame 10 and stops and use another button to go from frame 10 to frame 30 and stop... and reverse if u use the earlier button.
View 5 RepliesI want to preload all of the voiceover swf files before a lesson starts so that they are instantly available when each frame / page that incorporates a voiceover is first visited.
View 4 Replieshow to make text acting as a preloader so that its color changes as preloader percentage. i dont mean how to apply the math, i mean how to mask it or whatever action to achieve that effect?
like for example imagine the red is constantly growing to the right letter by letter (actually pixel by pixel:
I want to make a preloader for flash mx 2004 that when it finish becomes to decrement another time. I would like to do it to modify the flash preloader component.
View 2 RepliesI've got an external preloader from this tutorial [URL] and i would like to merge it with an preloader from oxylusflash (its a premium preloader)
[Code]...
