I have created a flash gallery where I am trying to fetch all thumbnails and large images from external folders. I am using the following code to load image blow-ups in a container:[code]While this works offline, when I upload the files, the thumbs are fetched from the image folder but not the large images. If there was an issue with the path, then thumbs should also not load.
View 2 Replies
Just trying to load and display a progressive JPEG with AS3. At this stage I do know how to load and display the jpg after it is loaded but I can't figure out how to display it progressively (ie: get something on the screen even before it is fully loaded).
View 3 RepliesI would like to load jpegs externally and have them fade in with a simple preload bar at the bottom. When the forward button is pressed I would like the image to fade out and the next image to fade in. When the back button is pressed I would like the image to fade out and fade in the previous jpeg. I would like to do all of this using Actionscript
View 1 RepliesI want to create a page for viewing JPEGs and SWFs. There will be a holder and underneath this there will be a row of thumbnails. On release of a thumbnail the JPEG or SWF will load into the holder. The files need to be updateable.
View 7 Repliesi'm making a simple portfolio site, and bringing in a series of jpeg files using a 'for' loop and the Loader class. once all the files are loaded in, i'd like to just be able to add, remove, tween, etc... the items from the stage as need-be by using instance names, such as movie clips or Sprites. but for some reason, i cannot seem to figure out how to have each image, as its loaded in, be separately accessable to me after the loop has completed.
View 10 RepliesWhen I put the common code for create a preloder in the beginning of the flash presentation, it will load the content of all the movie. But if I want to use different preloaders for loading JPEG's or mc, or different scenes, independly??
View 7 RepliesI create a lot of flash galleries with image viewers, that have the standard thumbnail and large image type scenarioMy question would be to ask if there is anyway to prioritise the order that flash loads external jpeg images..... at the moment it wont load the main image until all the smaller thumbnails have been loaded... which sometimes can be up to a total of say 130 small images.Is there any code that you could use with loadMovie, to prioritse that download, pausing the previous smaller thumbs download, then continue to load again after?his way the user could still use the slideshow whilst the thumbs are loading instead of having to sit and wait...
The only thing I could think of, was perhaps add a loadMovie command during the loading thumbs loop that would execute after loading say 15 thumbnails, but then that would still 'block up' any further loading until the remain images were loaded.
I have a flash file that loads jpeg files and runs through each on the timeline. I have nav buttons to go back and forth. Here is the problem, all images load on frame 5 and I do this while another image is displayed so that they are loading in the background. I do this so that my initial file size is small, but I can load images in the background making the flash file appear to load quickly and loading other elements after it starts.
So all images load on frame 5, then I go frame by frame until I hit frame 11. If I click one of my nav buttons to go back to say, frame 7, the jpeg is gone and is no longer loaded. How to load jpeg files into the library, or at least, keep them loaded after they have loaded once? I have attached my fla file for reference. I had to rename the extension to eps, but it's a fla file, just rename the extension.
Attachments: hm-slideshow2.eps (1.1 MB)
I am trying to dynamically load a progressive jpeg using actionscript 3. To do so, I have created a class called Progressiveloader that creates a URLStream and uses it to streamload the progressive jpeg bytes into a byteArray. Everytime the byteArray grows, I use a Loader to loadBytes the byteArray. This works, to some extent, because if I addChild the Loader, I am able to see the jpeg as it is streamed, but I am unable to access the Loader's content and most importantly, I cannot change the width and height of the Loader.
The cause of the problem is that until the Loader has completely loaded the jpg, meaning until it actually sees the end byte of the jpg, it does not know the width and height and it does not create a content DisplayObject to be associated with the Loader's content. My question is, would there be a way to actually know the width and height of the jpeg before it is loaded? I would believe this would be possible, because of the nature of a progressive jpeg, it is loaded to it's full size, but with less detail, so size should be known. Even when loading a normal jpeg in this way, the size is seen on screen, except the pixels which are not loaded yet are showing as gray.
I have a combo-box on the stage with a few items in the combo-box and also have corresponding JPEG/PNG image files. I need to display the appropriate image onto the stage based on the selection of the item in the combo-box. So, please I need ActionScript code or procedure to handle this using Event-Handling mechanism of MouseEvent.
View 2 RepliesI have created a portfolio page (all flash) and am using the following code to load external jpegs. I've also created this button to take one back to the main area. The problem is, when I click on the back button, even though it does take me back to the main page, the image stays there. How would I modify the code to make that image delete itself or hide when the button is pressed?
Code:
// set up loader, an instance of MovieClipLoader, and use the main timeline ("this")
// to listen to and respond to its broadcast events
var loader:MovieClipLoader = new MovieClipLoader();
loader.addListener(this);
// define what should happen when the jpg/swf is completely loaded
[Code] .....
I have loaded a jpeg image in flash. Now I need the handler after the loading complete. I have used ActionScript Code:
var imageLoader:Loader = new Loader();
var req:URLRequest=new URLRequest(arr[0]);
imageLoader.load(req);
mc.addChild(imageLoader);
imageLoader.addEventListener(Event.COMPLETE, image_func);
function image_func(e:Event):void {
trace("image laoded complete");
}
The above code is not working for loading complete.
I am new to Flash CS5 and I have created a slide show. I am trying to reduce the .swf file size for faster loading. I have been trying to adjust the size using the jpeg quality slider, but it doesn't seem to function whether I set it to 0 or 100 or anywhere in between. Publishing always generates the same size swf file.
View 3 RepliesI've successfully managed to load an external swf file into a movie, but I don't know how to resize it or position it... is this possible?
I'm using this code to load the swf into a movieclip called 'Holder':
Code:
var Holder:Loader = new Loader();
var urlrHome:URLRequest = new URLRequest("myMovie.swf")
Holder.load(urlrHome);
[Code]....
My 'Holder' is bigger than the swf importing, but ideally i would like to resize and position it in the center of the stage... (at the moment, the movie loads in small and sits at the top left corner of the stage, even though my container is in the middle...
I'm trying to load links into this container:
var swfContainer:Sprite = new Sprite();
addChild(swfContainer);
swfContainer.x = 238;
[code]......
there a more official name for a 'flash container' ? because very little results come up when i try and search for answers!can you load a container within a container, i'm thinking no but would like to clear that up also! for example i've followed this tutorial htm however when loaded up in a container nothing appears in the mouse over effect.. i've also tried loading jpegs into a swf via an xml which again works fine until i load it up within a container and nothing appears..
View 21 RepliesIf a swf file is destined to be loaded into a container file and interacted with from there, is it considered better practice for the code for the interaction to reside in the loaded file or the container file? I am writing on the timeline, rather than creating classes. Also if a movie clip on the stage contains buttons with event listeners attached and I remove the movie clip as a child, do the event listeners disappear with it, or should i remove them separately?
View 4 RepliesOn the Mac, everything works fine. I load a .swf into an ADM Flash Player Item in the Illustrator SDK and the .swf pulls some information from an options.xml file on local machine to create the UI.On Windows the .swf seemingly won't load info from other files on the computer. I can get the .swf to load inside the ADM Flash Player Item, but it seems like it can't access the options.xml file.When I run the .swf OUTSIDE of the illustrator container, everything works as it is supposed toI thought it might be a security/permissions issue, but wouldn't that come into play even when it's run outside of illustrator
View 2 RepliesI need to place a image in a container. But well it does not work It doesn't do anything actaully.Its been a while since a used ac3 but still does someone care to take a look?the picture that needs to be loaded and the xml file are all in the same folder.do i need to use a for loop? my teacher said it didnt need it.
// ------------- PICTURE LOADER ----------------
var PicXML:XML;
var picXMLLoader:URLLoader = new URLLoader();
[code].....
I'm trying to design a scrolling panel following one of the tutorials. I'm loading some photos using an XML into a container and I want this container to be reactive to mouseX. I can't get this movement all the smooth that I want. The images sometimes vibrate.[code]
View 0 RepliesI have a SWF that uses a XML to load other swfs and put them together.
I try to load my main SWF called "preview" in a movie container in a .fla
But when I publish my "index", the movie container only loads PREVIEW without the content.
My AS for preview is:
stop();
//--------------------------------------------------------------------------------------
// Import Tween Files | Stage Setup
[Code]....
i have a xml gallery with a mouse hover scroll bar which loads up photos. I want to have this movie clip load into a container in my menu movie clip but whenever i try nothing shows up. I can load other movie clips fine. I am guessing its something to do with the xml.
View 9 RepliesLate night dumb question time:I have an SWF named "gallery.swf" that loads into an empty clip called "holder_mc" in the parent movie. How do I call a function from gallery.swf that replaces gallery.swf with a file called "purchase.swf" in holder_mc? The function I'm using looks like this:
Code:
function ProceedToCart():Void {
_root.mcLoader.loadClip("purchase.swf",_root.holder_mc);
[code].....
i have main swf that loads external swf, here is the main FLA. the animation begins and stop at frame 71:
frame 71: there is empty movie clip with instance name container, this code in frame 1:
ActionScript Code:
var currMovie:String = "section1";
[Code].....
at this point, it loads sec1.swf, but when i click to load other swf, it will not respond.
I am doing a website with external swf using AS2 . The parent frame (container) is resizeable, the external swf is an animation. Some items draw outside external container. The external (swf with animation) will resize when parent frame (container) resized in scale.
The problem occurs when the parent frame resized, the flash programme define the width of external swf, such as the movieclips/jpeg outside the scene. (for example: both my Container and External swf are 1024x640. However, some of the graphics in the External Animation swf move outside this area. BUT the parent CONTAINER still RECOGNIZE and LOAD the content outside the defined stage.)
i found this izzue in FLEX, [URL]
Therefore, I would like to know if I could fix this in Flash CS3 (AS2) ?
I'm writing a preview site that will load SWFs/images from a URL into a preview pane. However, the primary problem I'm running into is actually loading these SWFs. It seems that the object/embed tags require width/height attributes. I will not know the exact size of these SWFs; in fact, I will know absolutely nothing about them.
What I'm asking is, what is the best way to load in these SWFs? Is there a library that exists to do this? Or do I need to do it myself?
I have a simple swf in an invisible <div>; when user mouseover's the <div> becomes visible.The swf has a ExternalInterface.addCallback( "..." , ... ) to create connection to js that needs to be called at load, such that by the time user mouseovers the flash-js connection is working.PROBLEM: on windows safari the flash does not go through its loading sequence until the user finally mouseovers
View 1 RepliesI am doing a website with external swf using AS2. The parent frame (container) is resizeable, the external swf is an animation. Some items draw outside external container. The external (swf with animation) will resize when parent frame (container) resized in scale.
The problem occurs when the parent frame resized, the flash programme define the width of external swf, such as the movieclips/jpeg outside the scene. (for example: both my Container and External swf are 1024x640. However, some of the graphics in the External Animation swf move outside this area. BUT the parent CONTAINER still RECOGNIZE and LOAD the content outside the defined stage.) i found this izzue in FLEX, [URL]
I have been trying endlessly to find a solution for a problem. All I want to do is to be able to load a loader container on to the stage and swap out each swf by hitting the corresponding btn. I found a code to do this and it works on static swfs but when I link xml photogallery swfs to it I get all kinds of output errors but the functions work in a browser. I know it is the code as I have tried 4 different kinds of xml photo galleries and all return similar output errors.
I know this is a bit of a pain in the @#$ but if someone could have a look at the zip file in the link below which contains a main.swf, an swf folder and one swf inside including all the xml. You will see what I mean. What I really need to acomplish is to have a set AS3 code for doing this, I'm sure a seasoned AS3 pro could look at the code in the file and see why I get the errors or I'll even settle for a code that works. I'm the kind of person that likes to know why something doesn't work and when it works I like to know how as well. This is one of the reasons I've been knocking myself out for days as you will see posts of mine about this.
zip file link is here
[URL]
I am creating a course that requires loading/unloading of several swfs in a container. My course structure is something like :
Course->Module01->src->test.as
->Module02->src->test.as
When I load file from Module01 in my container it works fine, but files from Module02 is not working as they should. They seem to be reading the code from the as file in Module01. The course works fine when I give the as files different names, but I want to keep the names as they are now as I have created several modules and sub-modules on similar structure.
