Heres my setup:
1.Parent movie loads ext swf on button click.
2.This ext swf has a button to load an ext swf into an empty movie clip of the main parent swf.
Im having no luck figuring out the proper AS to make #2 happen.I was trying this to no avail:
Code:
on (release) {
//load Movie Behavior[code].....
[code]All clips are squared.Ok, on the PlayerPlane, there are little soldiers, which have hotkeys. The effect I'm trying to create is I want to position the GameStage so that the currently selected soldier appears in the center of the GameClicker clip.The GameStage is movable by the player (to scan other areas of the map)by holding the CTRL key, so it's easy to kinda lose track of where your players are.I have tried using localTo Global and globalToLocal techniques, but I think I'm lost on the actual math of getting the GameStage to move the correct distance so that the selected soldier is centered to the GameClicker.[code]
View 2 RepliesI have a parent that loads a child that contains a ScrollPane. The ScrollPane then loads another child (timeline) that has buttons. I would like to be able to click the button within the timeline and have it load the SWF in the ScrollPane child. Making it easier to visualize..
View 0 RepliesI am needing to load a movie from with in a movie into the origional movie and then unload the first loaded movie. hahaha ok. Say I have a movie called M1 and M1 has an animation sequence that needs to run befor it loads but because of positioning issues they need to be loaded seperatly into different loaders. My my plan is to load M1Animation into ldr on my time line, then play the animation and at the end do something like
[Code]....
My problem is this sounds great in my head but the code above doesn't work
I got a "preloader" that creates an movieclip and loads an SWF. Now in the loaded SWF i want a close button to go back to the "preloader". The preloader isn't an actuall preloader but some sort of mainclip.Now i tried this:removeChild(MovieClip(e.currentTarget).parent.pare nt.parent)But i get error:ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.at flash.display::DisplayObjectContainer/removeChild()at MethodInfo-6()
View 1 RepliesI've got an application parent.swf that is loading a bunch of child swfs into it. Ideally, I want the parent SWF to load all of the static data that's needed for all of the child SWFs to function, and them pass that typed data to the children. I've achieved this to a certain extent with something like:
[Code].....
I have a main swf that loads external swfs into a holderMC. How do I get a button called playnext_btn on each external swf to tell the main swf to load a new external swf into its holderMC? I used this code in the main swf to do the initial load of the first external swf into holderMC:
Code:
var swfLoader:Loader = new Loader();
holderMC.addChild(swfLoader);
var bgURL:URLRequest = new URLRequest("benefits.swf");
[code]....
I have a main swf that loads external swfs into a holderMC.
AS3
How do I get a button called playnext_btn on each external swf to tell the main swf to load a new external swf into its holderMC?
I used this code in the main swf to do the initial load of the first external swf into holderMC [code]...
I'm using the hover caption tut to do a mouse replace which works here:URL...problem is when I load that swf into another parent swf the hover doesn't work.
View 6 RepliesI can't figure out why this text file won't load when its parent swf is being called into the main swf but will separately. in an actions layer on the main timeline I'm using this code: _root.contents.loadMovie("easter_scroll.swf"); I'm calling the easter_scroll.swf, which calls Easter.txt, into index_main.swf but the text file doesn't load although the easter_scroll.swf loads. I am confident one of you flash gurus can figure this out.
View 1 RepliesI am trying to load a swf into a holder movie clip from the child movieclip.It's parent has a holder that i want to load a swf into.I am navigating from within a child clip.It would be nice to have the swfs load from an external xml file but it isn't mandatory.
View 3 RepliesI'm currently making a platform game and when the player shoots i want to add the bullets to the stage. The players gun class is in charge of adding bullets. The "players gun" is a child of "players gun holder" which is a child of "player" which is a child of the stage. is there a better or more dynamic way for the "players gun" to add bullets to the stage rather than using parent.parent.parent.addChild (bullet);
View 2 RepliesI've got this interactive poem I've been working on for a class. I've basically finished each "episode" seperately. I made a parent document which essentially loads one of the ten child documents onto the respective key frame. Here's a sample of the code for the first key frame of the parent document:
stop();
import flash.net.URLRequest;
import flash.display.MovieClip;
import flash.events.Event;
stage.addEventListener(Event.ENTER_FRAME, LoadSWF2);
[Code]....
Well Two things are messed up about it, well my "ChildTimeline2" variable will off and on assosciate itslef not with the main time line of a child document, but of a nested symbol inside said child document. Even worse, the "gotoAndStop();" command I will give sometimes applies to Parent document... yaay! but often it will apply to the child document. The end result being this horrible looping moment where you are stuck in one child document for all time.
I wish I could attach the documents but they exceed the 300KB. how I can get Actionscript to listen fro the last frame of the maintimeline of the child document, or tell flash to gotoandStop for the parent document
if I add a clip to the stage as a child and remove the parent and set the parent equal to null, does the child get collected and removed from memory? What if the child has an image loaded into it as its child?
In my application I'm loading a series of png images as overlays that can be tinted for customizing in this app. When I trace my memory, the basic app idles at 64,000 k. The exact second I load those overlay images it goes up to 205,000k. If I remove those clips and "clear" the stage I should go back down to 64,000 k if everything is removed and collected correctly, right? It's not, it's hanging at 215,000 k. Are my images being cached and that is the reason for the memory staying up? If so, how do I prevent that. Or upon removing the parent of the image how can I un-cache the image.
If a user switches between models and loads several different items then the application actually crashes the Flash environment because of too much memory usage. It also does the same to browsers.
I am trying to access a function that is on my document class for my AS3 project, from a nested class. That is, the Document Class calls Class A which then calls Class B. So I am trying to access a function from Class B, I am trying to use MovieClip(parent).function(); but I am getting error 1120. The MovieClip(parent) (fixed to reflect my document class, etc) works when I try it from other classes but not from this nested class.
View 9 RepliesSimple drag and drop application where mc is dragged out of one parent mc and dropped into another parent mc.All works OK until I added 2 text boxes to the mc's -- one is a non-selectable dynamic text box (a label) which is set by the code, the other is selectable input text that the user can amend.
Finger cursor disappears when user hovers over the section of the mc that contains the text fields (even non-selectable text??) When the user trys to drag the mc by inadvertantly click-dragging anywhere within both text areas it causes this error: TypeError: Error #1034: Type Coercion failed: cannot convert flash.text::TextField@2374a381 to flash.display. MovieClip (same error appears for both text boxes)
The input text box may confuse the user - how do they sometimes click to drag and sometimes click to amend? I need to create an overlay area within the mc that is click-detected for the drag? Here's the relevant bits of code:
var itemArray:Array = [
{iname:"police",ititle:"POLICE OFFICER"},
{iname:"insurance_assessor",ititle:"INSURANCE ASSESSOR"},[code].............
I have a parent swf which loads many child swfs (though only one is displayed at a time). My intention was to use the loaded SWFs document class to retrieve an array of objects to be assigned a tab index, combine this with the parent's own array of objects and apply sequential tab indices to them all. But what happens is actually that the parent's objects are assigned an index, but the external swf is unaffected. In fact, the external swf retains its automatic tab indexing, when I would expect that having set a value for InteractiveObject.tabIndex, automatic tab indexing would be disabled.
I've seen similar tales elsewhere. Most posts I've read are wanting to load an external swf, give it focus and loop through those objects, then close the swf and return to looping through the parent. However I would like loop through all objects as one. including manipulating the focus manager(s), and basically fiddling with every tab-related property I know.
I've struggled with this for a long time and have thrown in the towel. How the heck do you climb the ladder, then go back down again into another clip?
View 2 RepliesI have been using:
yourbutton.addEventListener(MouseEvent.CLICK,f);
function f(e:Event):void{
Loader(this.parent).load(new URLRequest("newswf.swf"));
}
which was suggested to me in a different post to target the parent loader class, however i now no longer can reference my preloader in the parent swf (extract from the parent swf):
[Code]...
trying to on mouse over set the parent of the moused over text field to the highest depth child of its parent i tried both of these: [code] private function
[Code]...
i want to pass the variable from parent to child .How Can i pass the Variable.Here i paste my code.
My Parent Class
public class PlayerStrobe_domaincheck extends Sprite
{
private var myService:NetConnection = new NetConnection();
private var _loader:Loader;
[Code]....
i have a question. let say i have file1.swf , file2.swf, and file3.swf, how can i link this 3 files together,let say suppose file1.swf is the main content file, but as i load file2.swf, i want the file1.swf get replaced by file2.swf. How could i unload file1.swf at that time, so that my file2.swf will become the main content file?and again, when my current position at file2.swf, and i want it get replaced by file3.swf by clink on a button. so that the i can unload the file2.swf and let the file3.swf become the main content file.
View 13 RepliesI cannot use the following in my ActionScript due to conflicts with the host application:
_level0
_root
_parent references
On a pop-up box I have a close button with an absolute reference: closeBtn.onRelease = function{ unloadMovie("_level0.Page_1.holderBox");} Is there another way to make this work without using _level0 or _parent? I've read that it is possible to use a global variable on the main timeline and ref that, but cannot get that to work.
I am trying to make a calculator where a user can select from a list of items. If a user clicks say "ITEM1", it should add the item to a "CONTAINER_MC". The problem i have is all my data is set inside an array containing names and prices like the code below.
[Code]...
Here is a working script to drag drop a ball from the stage into another target mc:
ball.addEventListener(MouseEvent.MOUSE_DOWN, pickUp);
stage.addEventListener(MouseEvent.MOUSE_UP, dropIt);
function pickUp(event:MouseEvent):void{ [code]...
It works well but I'm new to AS3 and I am having difficulty amending this script to drag the ball out of a parent mc (instead of the stage) and onto another mc (the target mc). To explain: imagine a ball, a box, a tri, + more shapes all within a scrolling mc (initial parent), the user scrolls to select a shape, then drag-drops onto a target mc on the stage.The scrolling is no problem, but how would you amend the script above so that the ball can start inside a parent mc rather than on the stage itself?
I want to place an object either directly on stage or in some other movieClip but I need to read parent height to align it properly from the bottom.I thought I could use this and it will work for both the stage and the movieClip and I could get away with one line of code:
Code:
trace(parent);
//[Object Stage]
trace(parent.height);
but this doesnt work for stage, I need to use this:
Code:
trace(parent.stageHeight);
which is the same as this: so obviusly I need to ask first whether the parent is the stage, so I can find the height...So what is parent.height actually outputting?
i'm building a website using flash. i have a external swf file that i want to import into my website. i thought this would be an easy task but for some reason when i load the movie, it flickers. my website (parent swf) was build using 1.0. The external form swf was build using 3.0. My approach:
1.create an empty movie clip called mcForm
2.go to the mc clip page i want to pull the external movie into
3. within my actions layer, I call the following function loadMovie("main.swf", mcForm);
If i write:
LoadMovieNum("main.swf",0);
then the my main.swf opens correctly but closes the parent swf file. I wan the main.swf file to be embeded within the parent file.
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 RepliesI got a Parent Sprite, let's name it SpriteP, which holds inside it two other Sprites. Sprite1 and Sprite2.[code]Sprite2 is a rectangle. When I rotate it, of course, the height of its parent, SpriteP, GROWS. But I would expect that height to go back to what it should be when I'm removing Sprite2!And it does! If I remove Sprite2 while NOT being rotated, the height of the parent drops back to normal, 200.
View 10 Repliesi am slightly confused about the parent and child relationship. lets assume we have several different instances, what would be difference of adding them all as children of the stage and creating a parent-child hierarchy between them(other than the access path).
View 5 Replies