ActionScript 2.0 :: Mouse Click Detaction With No Button
Jan 31, 2003Basicly I would like this to happen on a left button mouse click any where in a movie.
View 3 Replies
Similar Posts:
ActionScript 2.0 :: Edited Mouse Cursor Versus Right Mouse Button Click
Jul 2, 2004I changed the mouse cursor using a tutoral from this forum, but when I press the right mouse button,the standard mouse cursor reapears.How to prevent that?
View 10 RepliesActionScript 2.0 :: Edited Mouse Cursor Vs Right Mouse Button Click?
Jul 2, 2004I changed the mouse cursor using a tutoral from this forum, but when I press the right mouse button, the standard mouse cursor reapears...
How to prevent that?
Mouse Click Event And Button On The Same Scene
Aug 19, 2011I have screen in which I have a button which sets the clip to lower quality, and I also have to have the mouse event in which when the mouse is clicked (anywhere on the screen), this sends you to a different frame (gotoAndStop). The problem is, when I click on the button, not only it does its function, but the mouse event also does. What I want to do basically is to disable the mouse event while pressing the button.
View 4 RepliesIDE :: Change Button Graphic On Mouse Click?
Sep 29, 2009This is the website that I'm working on. Not much going on yet but I have this invisible button that turns the radio on and off.. what I would like to do is have an image of the radio that I made up where the light is on for when it turns on and then back to off for when it's off.
[URL]
ActionScript 2.0 :: Move Mouse And Click A Button?
Dec 9, 2010I'm new to Flash and Actionscript. I'm trying to move the mouse to a random button and press it to have the onRollOver and onPress functionality.
I've tried this for mouse-over:
_xmouse = randomSelected._x;
_ymouse = randomSelected._y;
Apparently, this doesn't work....
If this is accomplished, I also need to simulate the mouse click(or button press) over the button. I've tried for hours and am seeing no logical end.
I've successfully managed to call the correct onPress and onRollOver for the random button selected, but these are just the handlers for the events. I need to raise those events in the first place.
ActionScript 3.0 :: Dispatching Mouse Click On Flash Button?
Jan 2, 2010I have this website I am developing. It has multiple pages that I would like to connect to each through a flash horizontal menu navigation. Here is a link to the site for your consideration. WebsiteI am trying to make it so that a mouse click is dispatched on the appropriate flash button when the page starts up so that the highlight menu tab will appear over the correct button.Here is the actionscript for the flash:
Code:
import caurina.transitions.*;
var button:MButton;
[code].....
ActionScript 3.0 :: Event Listener When Mouse Is Over Button Instead Of CLICK?
Sep 12, 2011I would like to have a movie to play when the mouse is over a button instead of when it is clicked. My script is now:
btn1.addEventListener(MouseEvent.CLICK, buttonClick);
ActionScript 2.0 :: Utilize The Right Mouse Click To Activate A Button?
Nov 2, 2010I need to utilize the right mouse click to activate a button. Is there a script that will activate the right click?
View 3 RepliesActionScript 3.0 :: Button Can Be Deleted During Run Time By Mouse Right Click?
May 14, 2009How a button can be deleted during run time by mouse right click.
View 3 RepliesActionScript 3.0 :: Not Finding Mouse Location & Button Doesnt Click?
Jun 3, 20101. Im getting the mouse location so that when its at the top of the screen a dropdown menu appears. It works fine on my first two frame, but on my third the drop down doesnt move unless my mouse passes over it.
ActionScript Code:
this.addEventListener(MouseEvent.MOUSE_MOVE, DropDownGameNav);
(MouseEvent.CLICK, onGameBackClick);
[code]......
ActionScript 3.0 :: Applying Mouse Event Double Click To Button?
Feb 21, 2009I have never used the Double Click before but now that I am trying to apply it to a button it's not responding.
button1.addEventListener(MouseEvent.DOUBLE_CLICK, buttonClick);
function buttonClick(event:MouseEvent):void {
trace('has been double clicked');
}
Is there more to know about the DOUBLE_CLICK?
ActionScript 3.0 :: Flash Changing A Button's Color Via A Mouse Click?
Jun 8, 2011I'm trying to learn a simple way to code a button's color to change when you click on the button itself. I got the button's alpha to work by doing the following: Create a text field with the word "Preflight" and convert it to a button. Drag the button onto the stage and give it an instance name of "Preflight1". On the first frame of the timeline, insert the following code:
import flash.events.MouseEvent;
import flash.geom.ColorTransform;
Preflight1.addEventListener(MouseEvent.CLICK, Preflight1Click);
[Code].....
Now when you test the movie, anytime you click the button "Preflight" the button's alpha drops (dims) by 10%. Works perfect and easy. Now, how can I do this exact same thing with the button's color? When you click the button, its color changes to some new color? I've tried colorTransform, but no luck.
Actionscript 3 :: Unable To Capture Button Click When Using Mouse Move Listener
Mar 18, 2012In my first AS3 project (not used Flash since AS1) I need to use a custom movie clip as a cursor and detect clicking on a button. Using the code below, the custom cursor works as expected, but I am unable to capture clicking on the button.
If I comment out the first line, the trace for clicking works as expected. I have tried changing the order of the event listeners, applying the follow to the button rather than the stage, but cannot get both to work together.
stage.addEventListener(MouseEvent.MOUSE_MOVE,follow);
start_button.addEventListener(MouseEvent.MOUSE_UP, playPhrase);
function playPhrase(event:MouseEvent) {
[Code].....
ActionScript 3.0 :: Dynamically Placing Movie Clip At The Angle And Global Position Of A Mouse Click (button) Which Is Constantly Rotating?
Sep 23, 2009Does anyone know the code for finding the global positioning of X & Y co-ordinates of a click of a button which is constantly rotating, and then secondly the code for when you click on the button it displays a movie clip on top of it -(position of x & y when clicked) at the angle that you clicked it (so underneath the buttons are still rotating so other people can click them where they are)to explain the context, I'm trying to design a mock up of a circular interactive table when someone comes up to it and clicks on one of the buttons that are moving, it reads where the person clicked it and opens up a new box (movie clip) where they clicked it (at the angle) so its not upside down if you are at the topI've included my .fla file which shows the four buttons moving and a little diagramexplaining what I'm trying to do.
View 5 RepliesActionScript 1/2 :: Click A Button On 2 Different Ways Shift Click Or Ctrl Click?
May 12, 2010Lets say i have a button on frame 1. And if you press it normal, you ll get to frame 2. But then if you click it on another way, you ll get to frame 3. How do i do that easy?! With another way i mean like shift click or ctrl click or is it an easier way?
View 3 RepliesActionScript 2.0 :: Make A Simple Image Gallery Which Changes Image Upon A Mouse Click On A Button
Nov 7, 2010I'm trying to find out how to make a simple image gallery which changes image upon a mouse click on a button, when a button is pressed I want the image to slide in from the left into the viewable area and then when another image is selected I want the previous image that was viewed to remain in the screen and then the new image slide across over the top to replace the image.
I can get the images to slide across from the left upon a mouse click however I can't change the layer order so if image 6 is viewed and then I click to see image 1, the image will slide into place however it will be below image 6 so therefore not viewable.
I don't have an example of what I'm after but I hope my explanation was good enough, I've seen this been done in javascript but I have to use flash and am unable to replicate the effect I'm after
ActionScript 3.0 :: Make The Mouse Click Event Recognize When Click Anywhere On The Screen?
Jan 26, 2012I just started playing around with as3 and I have a function for mouse clicks that draws a shape on each click. However the mouse click event does not appear to work unless I click a movieClip object I placed in the middle of the screen. Is there a way to make the mouse click event recognize when I click anywhere on the screen?
[Code]...
Flex :: Mouse Move Fires Mouse Click (Adobe Air)
Oct 11, 2011I am trying to have two guestures on a SpriteVisualElement which I thought should be pretty simple implemented: Mouse_Move for sweep Gestures and mouse click to enable.. So I have 2 Eventlisteners on my stage:
[Code]...
The main problem is that every type of sweeping on the screen also fires the taphandler().. how to identify the correct event? I tried to to my taphandler only if(!event.buttondown) but no success.
ActionScript 3.0 :: CLICK Event Won't Work But MOUSE ROLL & MOUSE OUT Does?
Jul 27, 2010Frame 1
Code:
band_button.buttonMode = true;
band_button.useHandCursor = true;
[code].....
ActionScript 3.0 :: Simulate A Mouse Hover/mouse Click?
Nov 30, 2010I am looking for a way to simulate a mouse hover/mouse click. What's happening is a bar is autoscrolling and checking to see if there is an active button 'below' it. Sort of like a bar rolling along a music staff and checking for notes.
What can I use to accomplish this?
ActionScript 3.0 :: Click On The First Button Loads Ok But When Click On Second Still Showing The First Movie Clip In The Back
Dec 14, 2011I have read all threads and can not find a solution but i am not somebody with a lots of knowledge about actionscript so here is my problem i am using this script .
[code]....
the problem is that when i click on the first button loads ok but when click on second still showing the first movie clip in the back ,,,,, i have try everything without luck ,,,, i guess i need to keep reading but will like to find an answer to this situation ,
Actionscript 3.0 :: If Function - When Click On The Button Takes To Another Page Without Showing The Click Animation
Sep 11, 2010I created a movieclip animation that only activates when i rollover the movieclip button. I further extended the frames and created another frame animation that i active only when user clicks the button. So i have a roll over/out animation and click animation in the same movieclip in the same layer. Now the problem is that when i click on the button, its supposed to take me to another page, and it does, unfortunately without the click animation. That means after i click on the button its supposed to first finish the click animation and then go to another page. But when i click, it takes me to another page without showing the click animation
SO I tried the If function, but i seem to make a mistake somewhere and i dont know what to do. Now there is no error in script, but onw there is a problem in link, the button finishes the click animation but it does not go to the tarrgeted"about" frame. here's the code
[Code]...
Flex :: Menu Control - Click A Button And A Menu Is Displayed. Click That Button A Second Time And Hide That Menu?
Jun 20, 2010Basically, I have a button and on click it displays a menu. I want to click that menu a second time and the menu closes. Currently, every time you click the button, the menu reopens. I pasted the Flex livedoc example below. If you click the button, the menu keeps reopening.Now, I rigged it up by setting a var to open and closed, so when clicking the button it does a check. However, if you click away from the screen, the HIDE event gets dispatched, and the menu closes. This messed up the open close var being set.
How could I make this Flex example below show the menu on button click, and then on a second button click, it closes the menu? Take into affect that if you click away from the menu, it closes it.Also, I played around with the MOUSE_DOWN_OUTSIDE event for the button and set the preventDefault, and the FlexMouseEvent event.cancelable is set to false.Changing to a PopUpMenuButton is not an option. I have to much skinning involved.Here is the Flex example:
<mx:Script>
<![CDATA[
// Import the Menu control.
import mx.controls.Menu;
[code]....
ActionScript 2.0 :: CS3 Movieclip Button - Click To Play, Click To Stop?
Jun 21, 2010I am building a flash interface and I would like a menu where it is hidden to begin with (just a tab). You click the tab to expand it, and click again to collapse it. I've made a movieclip with animation of the menu opening up and closing, but I can't seem to work out how I'd go about making the movieclip open and close properly.
View 4 RepliesActionscript 2.0 :: Counter Click Button That Can Storage Every Click On A Txt File?
May 18, 2011I need a counter click button that can storage every click on a txt file or something..
View 1 RepliesActionScript 1/2 :: Click Button To Play And Click To Reverse?
Nov 12, 2009I have a test button i would like to have play a movie where a graphic expands. Once stopped, I would like to be able to click that same button and have the graphic go backwards. I would prefer to have timeline reverse, rather than lengthen the timeline of the mc because then i have to line up the start and end, and if one changes, i have to remember to change the other.
btn_test.onRelease = function(){ if (_root.adinstance._currentframe != 1) { while(_root.adinstance._currentframe != 1) { _root.adinstance.prevFrame(); else { _root.adinstance.play(); }}
[code].....
ActionScript 3.0 :: Click On The Red Button And Click Back And Previous?
Jul 26, 2010I am trying to work out this issue in as3 and I'm sure its simple but can't seem to get my head around it. If anyone can see a sollution I would be very happy to hear from you. [URL]..If you click on the red button and click back and previous you will notice that the speed it goes back when you click previous is much slower the further through the slides you go?
[Code]...
This is a simplified version on the code, I'm sure its in this chunk somewhere.
ActionScript 2.0 :: "Right Mouse Click" On A Flash SWF File Embedded In A Page And Click "Print"
Dec 6, 2006If I "Right Mouse Click" on a Flash SWF file embedded in a page and click "Print" it prints just the flash, in perfect colour etc etc..How can I achieve this exact operation, but as a button in Flash? So it prints just as if I did the above operation.
As an extra, if you know how - Is there any way I can default the page to print out "Landscape" too ?
ActionScript 2.0 :: OnPress Doesn't Work If The Mouse Button Is Pressed Again But The Mouse Is Not Moved?
Jul 26, 2006I have a very simple piece of code but it has one very annoying bug. When I press the button a second time, the code doesn't work. The only way to get the code to work is by moving the mouse a tiny bit, or moving the mouse off the button and back on. make a button that can be clicked many times without moving the mouse?
Code:
randommultiquiz.onPress = randommultiquizOnPress;
function randommultiquizOnPress() {
_root.attachMovie("connect", "newconnect", 200);
newconnect._x = 0;
[code]....
