ActionScript 2.0 :: MovieClip Buttons And Showing Extra Animation
Nov 28, 2011
I'm creating some buttons and I want to show an animation every time a person clicks on it. The problem is I have five buttons and need to remove that animation before the new animation starts.
Let me explain this:
1. Press button 001
2. Button 001 animation starts and stops at the last frame.
3. Press button 002
4. Button 001 animation returns to frame 1.
5. Button 002 animation starts and stops at the last frame.
I'm using vars but my code is not working. Here's the AS for the buttons: (ZonaActiva is the the invisible movie clip that triggers the button animation).
ActionScript Code:
stop();
ZonaActiva.onRollOver = function(){
gotoAndPlay("inicio");
[Code] .....
In the stage I have the blood animation movie clip under the buttons. Each one has its own instance name (i.e:mcBlood001, mcBlood002, and so on).
View 3 Replies
Similar Posts:
Mar 23, 2012
I'm working on an educational Flash animation. In one scene I have 4 buttons which need to show different movieclips. I have created all 4 movie clips and inserted into one layer in 4 frames, one after another one. I also gave the frames specific names. Then the buttons are all in one frame with a name so I could call it when we're on "rollout" mode. Now, when I go over the first button it shows its movieclip perfectly but the second one show two, overlapping, with the previous frame! I did also deleted the previous movie clip but still get the same error!!!
Here is the code that I use:
on (rollOver) {
gotoAndPlay("lobes", "think");
} on (rollOut) {
gotoAndPlay("lobes", "lobes-button");
stop();
}
lobes is the name of the scene, think is the name of the frame which has the movie clip and "lobes-button" is the name of the frame which has all the buttons without any movie clips.
View 5 Replies
Aug 16, 2011
Cannot get movie to play page from link - below is code used (same code used for other pages from front page and works - this code is for page 5 which links directly from page 3 (not front page)
on (rollOver) {
if (_root.link != 5) {
gotoAndPlay("p1");
[Code].....
View 1 Replies
Oct 29, 2010
I have inserted the Anim-FX animation into my website, and when I preview it I can see the preloader but after that I'm left with a black box, where supposedly the animation should be?
View 1 Replies
Sep 8, 2009
i have a parent movieclip mcA and i want to add another movieclip mcB (child movieclip) inside mcA such that the extra part of mcB is hidden. The size of movieclip remains same as of mcA
For ex:-
mcA = 300x300
mcB = 400x400
then only 300x300 of mcB movieclip is visible and rest of the part is hidden.
View 5 Replies
Jul 29, 2009
In my application I want to show 5 clock. In the clock shows international time depend on country based But Normal clock time I will get sytem time (getmintues and gethours) and show. How can show all country time? I tried below code for animation.
public function createChildren() : Void {
border_mc = createClassChildAtDepthWithStyles(
_global.styles.rectBorderClass,
DepthManager.kBottom, { styleName : this });
// create the empty movie clips in the order
[Code] .....
View 1 Replies
May 18, 2010
I'm absolutely new to AS and wondering why this doesn't move the way I'd like it to...Logically, shouldn't the x increment display each time it happens, showing a constant animation? Instead, the x increments 50 at a time, so the rect is at 0, then it's a 50
Code:
var container:Sprite = new Sprite();
var item:Sprite = new Sprite();
[code]......
View 1 Replies
Jun 1, 2010
i am using a movieclip who has two nested movieclips, the problem i am dealing is that when i try to get the width or height of the parent movieclip it always showing the values of the small nested movieclip, when i draw the movieclip it draw perfect but when i read this values shows that error, what can i do?
View 2 Replies
Aug 23, 2011
I have an enemy movieclip.Inside that movieclip I have a motion tween so it moves around on the stage, then inside that movie clip I have an animation of his feet moving so it looks like he is walking as he moves across the stage. Also in that same animation of him walking is an image of him laying down and dying on frame 6.I just have the walking animation looping as the playhead gets to frame 5 so it won't show him dying.So what I want to know is how do I make it so when my hero shoots him with a bullet..the enemy goes to that dying image on frame 6 and stop.I can already make it so the bullet will kill an enemy if it is just movieclip>inside movieclip.But I don't know how to make the code communicate to make it work when its movieclip>inside movieclip>then inside that movieclip.
View 2 Replies
Jan 13, 2010
How do I make the buttons hide and show on mouse over?
View 1 Replies
Jan 25, 2011
I have made a script for a custom cursor, but the only problem is that when I hover the cursor over a button, the button shows on top of it and the cursor hides underneath and you can't really see what you're trying to click.
Here is my script:
Code:
onEnterFrame = function() {
cursor._x = _xmouse;
cursor._y = _ymouse;
Mouse.hide();
}
(The instance's name is "cursor")
View 6 Replies
Mar 22, 2007
I quite often have to create portfolio sites which have a list of projects on the lefthand side. When each project is clicked the relevent content is loaded into the main screen. I'm now moving towards creating such sites where the menu content is XML driven.
What I want to know is, what is the BEST way to do the old radio button style thing where the clicked button changes state (eg. colour) and the when another button is clicked, it returns to it's up state.
I've done this before, when I've created the buttons manually, by creating a 'clicked' variable that can either be true or false for each button, the value of which is changed when a button is clicked. The problem with this (I think) is that it relies upon me knowing how many buttons I have, and if this is driven by XML that is going to get messy.
What I'm after is a very simple, self contained method of setting a button's state when it is clicked (no problem), but then 'unclicks' when any other button in the menu is pressed.
View 6 Replies
Dec 15, 2009
My problem is that I have made the tutorial named "Creating Animated Buttons" but when I set the text (b1.buttText.buttonText.text = "portfolio";) de sample text is disappeared and the new one doesn't come. I have traced the variable b1.buttText.buttonText.text and it is the "portfolio".
View 1 Replies
Jan 6, 2005
When you have movies in a layer, how can you stop the buttons of the underlying levels from showing through. I don't want the user to think that there is a button on the level showing because the cursor turns into a hand....plus also when clicked it does activate the lower movies actions.
View 1 Replies
Jan 11, 2007
I have created an image gallery that loads from an XML file using mostly previous Kirupa threads. From Scotty's code (I think -- my head is moosh now) I got numbered buttons for navigating between the images.Each button is a movie clip with different labeled frames for "up", "active", "hover", and "down" states. I'd like to have the numbered button change color when its image is on view and then change back when a different image loads, and I can't figure out how to do that. I know part of the problem is that the onRollOut function overrides other changes, so I'm willing to give up the rollover effect if necessary.[code]
View 1 Replies
Jun 29, 2011
After reading some articles about increasing performance, I read that if you would cache your movieclip animation to a sequence of bitmaps, that this would be much faster. So after spending lots of hours I created a bitmap animation class that converts a movieclip to a bitmapanimation.When I completed it, and did a performance test with about 40 movieclips on a stage size of (1024x900) and set the frameRate to 100 fpsIt runned on 58 frames per second. (30 mb memory) But when I tested it without converting it to bitmaps by doing it the old and simple way of adding the movieclip dynamically on the stage withalso 40 movieclips, it runned even better (61 fps). (4mb) And it did not use so much memory as the bitmap approach was doing.
Then I thought perhaps I was doing something wrong with convertinh to Bitmaps, and found on the internet also a Bitmap Animation Class, and after testing this one, I got the same result. It seems to run faster if you don't convert it to a bitmap sequence.I only have experienced negative points, like slower framerates, using more memory, and the prerendering causes a calculation performance pause when compileing. (this is even with the fix to pass the already rendered frames of the movieclip to the next bitmap animatioin class) I am now confused of what is the best way of creating better pefromance when using the same movieclip animation (like 80 times at once).
View 5 Replies
Sep 11, 2010
I created a movieclip animation that only activates when i rollover the movieclip button. I further extended the frames and created another frame animation that i active only when user clicks the button. So i have a roll over/out animation and click animation in the same movieclip in the same layer. Now the problem is that when i click on the button, its supposed to take me to another page, and it does, unfortunately without the click animation. That means after i click on the button its supposed to first finish the click animation and then go to another page. But when i click, it takes me to another page without showing the click animation
SO I tried the If function, but i seem to make a mistake somewhere and i dont know what to do. Now there is no error in script, but onw there is a problem in link, the button finishes the click animation but it does not go to the tarrgeted"about" frame. here's the code
[Code]...
View 1 Replies
Jun 4, 2011
I have a problem I have my movieclips on my stage with alpha 0 but I want when I press on a button that the movieclip comes on top of the other. This is my script : its just when I press on a button it shows the movieclip but it needs to get on top of all the others for each movieclip
do_knop1.addEventListener(MouseEvent.CLICK, toon1);
do_knop2.addEventListener(MouseEvent.CLICK, toon2);
do_knop3.addEventListener(MouseEvent.CLICK, toon3);
do_knop4.addEventListener(MouseEvent.CLICK, toon4);
function toon1(e:MouseEvent):void {
TweenLite.to(do_promotiedisplay, 0.2, {alpha:1});
[Code] .....
View 2 Replies
Apr 21, 2011
I'm making an interactive website using ActionScript 3 and no matter what I try and do I keep getting the following error messages:
Characters, Layer 'actions', Frame 2, Line 5 1021: Duplicate function definition.
Characters, Layer 'actions', Frame 2, Line 12 1021: Duplicate function definition .Characters, Layer 'actions', Frame 2, Line 19 1021: Duplicate function definition.
I don't really understand what I'm doing wrong because it says "duplicate function" yet they aren't the same functions. Here is the ActionScript I've used for the first page:
stop();home.addEventListener(MouseEvent.CLICK, goHome);function goHome(evt:MouseEvent):void{ gotoAndPlay("Home", 1)}characters.addEventListener(MouseEvent.CLICK, goCharacters);function[code]....
View 1 Replies
Feb 2, 2009
Code:
var RootNode:XMLNode;
var contentXML:XML = new XML ();
contentXML.ignoreWhite = true;
contentXML.onLoad = processXML;
contentXML.load("about.xml");
function processXML(success:Boolean):Void {
[Code] .....
When I test the above my XML loads properly into the holding MC. My problem is that it is also showing all of the XML tags.
View 1 Replies
Dec 7, 2009
in a game i am doing i have a class called "player" extending MovieClip.this Player MovieClip has multiple frames with animations in it.for example a MovieClip "Walk-right" on frame 2.this walkcycle clip now contains also some sprites/movieclipsone of these i have to colorize in every frame of the walkcycle according to the players color.how can i achieve this?in as1/as2 i used something like: this.clr.setGRB(_parent._parent.myclr)is there a way or do i have to think differently about the way i have to display the animations?
View 0 Replies
Dec 1, 2009
on frame 1
for (j=0; j<20; j++) { duplicateMovieClip("letterCont", "Letter"+j, j);}
//this frame is executed only once
on frame 2
for (j=0; j<20; j++) { if (j<MsgLen) {
// remove old clip in a loop sequence _root["Letter"+j]
[Code]....
frame 3 is looped until all 20 are shown and then it send back to frame 2
The checking the data given in frame 3 is correct
What my couse it not to show? is there a way to debug the clip it self the? _x _y _width _height on the debugger has correct values for all clips as expected but the clip is not on the stage why?
View 5 Replies
Sep 17, 2011
im building this interface in FLASH CS5, where i want to place a digital clock, i created a MovieClip InstanceName "RELOJ" in that MovieClip i have two layers, one with two Text Fields that are going to display Time and the other the Date, and on the other layer is the actionscript (AS3) of the whole clock and date.ok, now i place that movieclip on my Main TimeLine, i play the swf but i dont see the clock working.I have tried placing an Actions layer on my main timeline and writing "RELOJ.play()" but nothing... How do i play that MovieClip?UPDATE: This is the code inside the MovieClip. The Fonts are Embedded.
dateDisplay.addEventListener(Event.ENTER_FRAME,showTime);
diaDisplay.addEventListener(Event.ENTER_FRAME,showDia);
function showTime(event:Event):void {
[code].....
View 1 Replies
Oct 26, 2009
I am trying to make a website using flash, and as I dive deeper on this project i realize that it is far more complex than I thought.I came across with this problem:In my webpage, i reserved a big space for content, which would include text and images (a space for news). In that space, flash would read, and show, a word file (for example), thus making it possible to update the content of the website without changing the SWF file, but changing only the external word document.
View 4 Replies
Mar 22, 2010
[Code].....
The added movie clip is not displaying at all? I've ported the code over to frame 1 of the timeline and it is not showing up either.
View 6 Replies
May 17, 2010
I created a MovieClip and added it to the stage(addChild). Next, I created a Button (exactly BaseButton) and I added it to the MovieClip.The case is it won't show up. When I add directly my button to the stage (my Main class is document class ) there is no problem. But I want it to show up in my MovieClip and I dont know what I am doing wrong =[.The addChild is working because when I
Code:
trace(controls.getChildAt(0),getChildAt(0));
I am getting
[code]........
View 0 Replies
Mar 31, 2009
I have several mcs that load with the following command:
[Code]....
Base mc is my empty container movieclip. Basically I have a gallery with thumbnails that load a movie with the appropriate gallery content. The issue is, these movies load on top of the thumbnails movieclip, showing overlap. I could just cover the overlap but I can still click on the buttons in the background. How can I make it so the new movies are higher level or depth than the base movie clip?
View 5 Replies
Sep 21, 2009
I have a simple game with a dial and a needle. I have made two "right" and "wrong" buttons.Simply, I need to be able to make the needle move forward when the "right" buttons is clicked, and backward when the "wrong" button is clicked, regardless of the needleposition on the dial. What would be the simplist way to accomplish this? I am a beginner with Actionscript, and I've tried all I know to do
View 1 Replies
Nov 22, 2009
I m loading 2 swf in my flash file. The first one contain simple animation, and another one contains the button for play and stop. Now I want the control the first swf animation with the another swf buttons.
View 3 Replies
Jan 10, 2011
i am using as2 video gallery, my question is i need to move 3 menus buttons on left hand side when click the "coming soon" button , it will go top and "featured " button go bottom , like this vis vesa this is as2 code near the button
Code:
public function createNavList() {
var cur = this;
var i, temp, base = navList.base;
[code].....
View 0 Replies
