_level0_root.nextScene();
I'm trying to tell flash when i press this button tell level 0 go to and play next scene. Is this possible.. what's the correct way to do something like this.
_level0_root.nextScene();
I'm trying to tell flash when i press this button tell level 0 go to and play next scene..
I know how to make a button and all.. but what do I do to make it go to the next scene?
scene 1: Startsidan
scene 2: Sidan
I made a frontpage and when I click on the picture I want it to go to scene 2, where it enters the inside.
the button is called PortalenKnappen, I want to be able to just press on it and it will go to the "sidan(scene 2)" that's empty at the moment.
what would I have to write? I've tried "portalenKnappen.onPress nextScene("sidan", 1"); but it doesn't work.
I've looked around and found various answers... tried a few, but am still getting an error perhaps i can get an indepth breakdown on why my code isnt working.
first off i have 2 scenes already created. "scene 1" and "scene 2" i want a button in scene 1 to goto and play scene 2 frame 1
here is my code:
ActionScript Code:
Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
// to be used for touch on android
startButton.addEventListener(TouchEvent.TOUCH_TAP, ms_touchStart);
[Code].....
I am making a presentation and I want when my movie stop. the user press ENTER and the movie go to and play my next scene (scene 3) like powerpoint. How I can make that?
View 4 Repliesi have a menu with 8 buttons and every movie clip of them have the following script on it
[Code]....
what i need is when i press the movie clip it goes to specific scene label. i tried this code
on (release) {_parent._parent.gotoAndPlay("b")
}
but it doesnt work with movie clip but works with buttons only , so is there any equivalent code to use with the main code above of movie clip.
I've in my flash scene main page and sub pages scattered in different ereas at the scene, but the scene start from main page and that what will show only, now if I clicked any link the scene carry us to the link page in the same scene, and from that page I can press any other link to start moving over the scene to different pages.
View 6 Repliesive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
im trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...
I have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline
mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1);
mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
This is making me a little kooky today. I thought I could defined a library path in PREFERENCES > ACTIONSCRIPT > ACTIONSCRIPT 3.0 SETTINGS then that library would be available to all AS3 FLA files, but that doesn't seem to work for me. If I use the PUBLISH SETTINGS and define the library path everything is fine.
Is there something that I could have done to disable the application level class path functionality? I guess I'm trying avoid having to set the library path for every new FLA I'm making.
How can i make it so a when you press a button it starts a countdown but every other press dosent reset it?
View 14 RepliesI'm doing a bigger aplication in flash (as2).Image, there is a main "home" flash with several menu buttons.Clicking these buttons, I load external swf into an empty container in this "home" flash.[code]clicking buttons in this second level, will load external movies into an empty container in this SECOND LEVEL swf.This works fine, but now, coming to the THIRD LEVEL (don't think there will be more in the future) problems come up, some scripts won't work.Now (I'm a as2-beginner) I think, loading external swf ALLWAYS into containers in the first "Home" flash should solve the problem.But I don't know, how to load an swf from the third level into a container in the first "home" level.In the "home" level, I have a "close" button, that will unload the container content.I need to go to a certain scene "content_2" in the home swf, too.
View 7 Repliesi have game im doing, and i want it to jump to level 2 upon completing the first level, but the problem is, the level 2 is a seperate swf, i've tried to use
Code:
on (release) {
loadMovie("level2.swf",2)
}
I have a problem when I making a game Flash with action script 3,. I want tomake my character move when the key helding and I want my character attackwith one tab press either
View 3 RepliesI have text field which is 0 by default (score_txt)Two buttons +1 and -1 (plus_btn and minus_btn) When I press +1 text increases by one, and when i press -1 it decreses
View 4 RepliesUsing Actionscript 3 Have a button called "breckenridge". I also have a scene called "breckenridge". On a keyframe is the following code.
[Code]....
When I test the movie and I press the "breckenridge" button it takes me to the "breckenridge" scene and stops on the the first frame. Then I get the following error message
[Code]..
my main timeline, what I am assuming is my first scene called "aspen", stops at frame 300. What gives? Okay, I know everyone hates scenes because it causes navigation problems. However I have this .fla split into sections and I intend to add more stuff to each section in the future. The easiest way I can think to organize these sections with out having a hodge podge of added stuff jumbled on one time line is to break it into scenes.
I have called main.swf into a container in index.swf.
myMCL.loadClip("main.swf","container"); is an action on my Index.fla timeline.
I have my navigation on index. (i wanted it to go on main, but the nature of the animation meant it had to go on index)
I need to call "home.swf" into "main.swf" from the navigation button in Index.swf.
When I had the navigation on "main.swf" this was my code to call "home.swf" into the page.
on (release) {
Preloader_mc.gotoAndStop("home");
}
("home") is the label name where the preloader is for home.swf
how to call the preloader for home into main.swf from "INDEX.SWF INSTEAD OF MAIN.SWF"
I have a file1.swf which loads file2.swf into it. Within file2.swf i have a button that when clicked needs to remove file2.swf and load file3.swf into its place.
View 2 RepliesIs there a way to link to one level below the current level? Instead of saying _root.level1.level2.level3, something like: ../level3 ?
View 4 RepliesSituation:
- We have a Flash application located on a SAP EP (let's say ep.x.com)
- We have a SAP ABAP Application (Webservices) on a SAP WebAS
server (abap.x.com)
- Clarification: This is not about Flash islands / but a normal Flash application communicating with WebAS ABAP via WebServices
Problem: Due to the changed security policy in Flash 10 this scenario does no longer work.
- A crossdomain policy file on root level cannot be deployed on root level
- The WebServices http/s headers cannot be modified, since the WebServices are generated by the WebAS IDE.
Comment: Technically there is a way to patch a WebAS ABAP,but this is not a practical / acceptable way in a normal SAP WebAS infrastructure.
Conclusion:- The above scenario (Flash from EP content / WebAS ABAP as backend) is a quite normal scenario in the SAP world.
- SAP / Adobe always features the close relationship between their technologies.
Question:- What could we do?
- How does the Visual Composer works around that problem?
I have a movie that's 500x400 px in level 0 and has lots of thumbnails with pictures that I want to open. the thumbnails open a 500x400 px movie above the other but on level 1. the problem is that when the new movie loads on level 1, the thumbnails on level 0 (that are now hidden by the new movie) are still active, and if i click anywere in the movie on level 1, it trigger an action from level 0. Is it possible to load a movie to level 1 that deactivates the movie in level 0 without unloading it?
View 1 Repliesso I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
No..not that type of parenting ;DOK,I have a main scene, then sitting in the root scene I have 2 movie clips.1)centro2)fotoIn the first movie "centro" there is a menu btnI want this menu btn to call up mclarge + its frame (1) thats housed 3 levels inside the foto mc in root.
Main scene - (1) centro (banner which houses menu btn)
(2) foto_mc
- Main_boy_mc (<---works if menu btn houses in here)
[code].....
I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesArgumentError: Error #2109: Frame label null not found in scene Scene 1. at flash.display::MovieClip/gotoAndPlay() at intro_fla::MainTimeline/intro_fla::frame606()[intro_fla.MainTimeline: :frame606:3]
View 3 RepliesI'm trying break down a large Flash project into smaller swf's using a Loader :
stop();
var reqA:URLRequest = new URLRequest("New_Inro.swf");var loaderA:Loader = new Loader();
function imageLoadedA(event:Event):void { addChild(loaderA);} loaderA.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoadedA);loaderA.load(reqA);
Some of these swf files are animations which have code that states :
MovieClip(parent).gotoAndStop("frameThree");
The first loader works but I cannot get that swf to move on to the next frame(frameThree) to load the next swf file
Instead I get this message
ArgumentError: Error #2109: Frame label frameThree not found in scene Scene 1. at flash.display::MovieClip/gotoAndStop() at New_Inro_fla::MainGuy_1/frame146()[New_Inro_fla.MainGuy_1::frame146:2 ]
I'm getting this error in the OUTPUT window, when I PREVIEW (COMMAND + RETURN) my SWF:
ArgumentError: Error #2109: Frame label nGallery_btn not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at BrookBrovazMusic004_fla::MainTimeline/pageSelect()
- The funny thing is that the SWF works the way I want it to. You can view it here: http://brookbrovaz.com
- I just don't like the idea that something's wrong, according to the OUTPUT window anyway.
[Code]...
the error is:
ArgumentError: Error #2109: Frame label instance121 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at Untitled_fla::MainTimeline/goLabel()
this is my code:
stop();
function goLabel(e:MouseEvent):void
{
[code]....
i am using a movie clip button to open a swf with a loader. hope i m not missing any information/other coding....