how do I set this onLoadInit so that with every new load it moves the _x of the container it's loading into (photoBox1 2. 3...) by the width of the parent container (picCont).Another option would be to include that picMCL right within the loop but I don't know how to pause the loop until onLoadInitis reached and new photo can be loaded.
[Code]...
I have a text field on the left and a movieclip butted up to the right of the text field. How can I move the movieclips position left or right based on the text fields width?
View 3 RepliesI have multiple nested movieclip in its own different movieclip, and i would like to arrange them accordingly. My idea was to use the localToGlobal function. I can get the position of the MC on stage, but how do I use the function and place the MC based on stage?
cAPos = new Point(objectA.y);
newcAPos = objectA.localToGlobal(cAPos);
cBPos = new Point(objectB.y);
newcBPos = objectB.localToGlobal(cBPos);
objectB.y=objectA.y+objectA.height <-- based on stage
Im working on an Xbox Live flash gamercard. Ive ran into a problem. I can't position each of the MovieClips ive genereated from the loop. I get the error:
Code: Select all1120: Access of undefined property rpg0.
1120: Access of undefined property rpg1.
1120: Access of undefined property rpg2.
[code].....
In the following code when my movie first starts I want all my movieClips to be 25 pixels appart from each other no matter what the width of the mc. In the function "thumbnails" I can't seem to get my images to be seperated by 25 pixels on start up.I also want to set the y position of each movie clip so each image is seperated in the y direction by varying amounts but not to excede maxY amount. I haven't built that in yet. I am just trying to get them seperated in the x position by the correct amount.
Code:
cliparray = [];
function loadXML(loaded) {
[code]....
Here's a chunk of my code:
Code:
//This function uses loops to generate the grid from the array below.
function drawIt(theMap)
{
[Code]....
Basically, it generates a grid from two movie clips which are just different coloured squares. It reads in generateMap function to decide whether it will be a red square or a white square. 0 = white 1 = red. (the reds are going to prevent a sprite from travelling on them)
Anyway, at the moment the starting point for generating this grid is at 0,0 of the movie clip. I want it to generate at say 150,0 so i can add a console on the left which can control a sprite around this grid.
i have a movie in which i have 50 thumbnails dynamically added to a mc and i have a scroller to scroll the mc which works fine.. on each thumb i have a rollover image (which is a bigger image of the thumb) which works fine but i want the rollover image to be shown within the area of mask area which is not happening now..
View 4 Repliesi'm trying to do an infinate loop for my m.clip.the looping part does not want to loop...it loops back to my firrst frame even though there are two same picture in the movie clip.....here's a sample of what i use for the infinate loop script..
[Code]...
This code has my computer hanging everytime.[code]...
View 5 RepliesI want to loop through a movie clip and assign a function to each of the clip's child movieclips. when i do a for...in loop and then do a typeof() trace I get "string" and obviously it won't let me assign lets say 'onRollOver' functions to the children.
View 6 RepliesI am importing a movie clip as a symbol from a SWF using Embed to a AS3 program and, after attaching the movie clip to the stage, the movie clip keeps repeating. Before you ask I have indeed creating a script layer and put a "stop()" on the last frame. In fact the swf containing the symbol works perfectly fine when executed on its own or in Flashdevelop (my choosen IDE). Its only when imported does the clip keep repeating.Here is the code:
Code:
package {
import flash.display.*;
[code]......
I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 RepliesI am trying to loop a .flv clip located in an array when that clip has finished. Do I add an EventListener.complete then play it again? Ummmm. This seems pretty pedestrian.
View 2 RepliesI would like the loop to create the multiple setInterval's based off the array, but the function called is not clearing the setInterval...
var timecode = new Array(1, 2, 3, 4);
// use the array to assign the interval
for (var i = 0; i<timecode.length; i++) {
[Code]....
I'm in the process of including a 1 minute .flv into a flash doc. I don't want to stream the video since i want the video to load almost instantly and do not have any room for streaming progress bars also i can't use flash8 and to get video to stream in flash 6 is a pain.
What i have planned to do now was slice up the 1 minute video into 6/ 10sec clips. Put each clip in a seperate external movie which will range from 50-100kb each in kb's. I want to preload the first video and then play it, then in the background load external video2 while external 1 is playing. then play external 2 at the end of external video1 and do the same for the rest of the videos. Its a lot more work but i think this way i can reduce load time and have the video play almost straight away.
What do you guys think? is there a easy way to do it and achieve the same results or should i continue with my concept above, and if i do what i have planned is there any code that you can direct me too that will load a movie / hide it and play when called for?
I have an array with many values pushed into it (happen to be names of objects). I am using a for loop to check all of the objects (by index number) for collisions, etc. Periodically, depending on a condition, I want to remove the currently checked object's name from the array list. I noticed that there is a problem if I immediately splice the checked name from the list. Namely, the list gets shorter, which is what I want, but not until I'm done checking all objects. Is it a good idea to solve the issue by incrementing i-- after the splice? I do this so that the object that used to be next in the list doesn't get skipped.It seems to work very well but I want to know if this is a lame/problematic solution and if there are any better ways of dealing with it
for (i=0;i<myarray.length;i++){
var ob=myarray[i]
//any old condition
[code].....
I'm trying to dynamically stack images that are being pulled in via an xml file. Below is what I'm doing, and it almost works. The problem is that it only seems to fire off the event complete function on the very last one, instead of going for all of them. Is there a way to make it run the even.complete function for each image?
function aboutfileLoaded(event:Event):void {
aboutXML = new XML(aboutTextLoader.data);
for(var l:int = 0; l < aboutXML.aboutimages.image.length(); l++)
[Code]....
Would it be possible (Without being extremely inefficient) to loop through a display object and reset their children's ChildIndex based on their y value?
View 1 Repliesdoes anyone know the syntax?i want to get this._x = movieclip01._xalthough I do not know the correct syntax.
View 1 RepliesI'm trying to create a loop which generates a single series of sine results ranging from 0 to 1 based on 100 loops ( ie 0 ,0.011 ,0.1111........up to 1 in a single run)The results I want start at 0 and increment in a series up to 1 and then stop. I suppose this would be one half of a sine wave I have tried the following but it goes from 0 to 1 ,1 to 0 , 0 to 1 etc whereas I want a single straight run of 100 values from 0 to 1
I tried :
for(var i:Number=0;i<=100;i++){
trace((0.5*Math.sin(i)) + 0.5);
}
This does not work.
I am trying to define a clip to be dragged based on the clip used in the mouseEvent. It doesn't like that I am trying to create the var dragItem three times. It says, "A conflict exists with definition dragItem in namespace internal."Is there a way to do this that I am not seeing?
Code:
function mousePress(evt:MouseEvent):void
{
[code].....
Is there a way to make a movie clip based on a blank object?the way i usually make one is by drawing a rectangle and making it a movie clip.
View 1 RepliesIs there a way to have a pre-loader based on a single movie clip, instead of on the entire SWF size? This movie clip may have a single graphic, but the entire movie has a slideshow with more images to display...but rather than making my visitor wait for the entire site to download before they see anything, I'd like to have it so when that graphic is loaded, it displays while the rest of the movie finishes loading. And there would be a preloader that shows the progression of the single movie clip.
View 3 Repliesi have a button thats adds a movie clip to the stage...the movie clip height is bigger than the stage. is it possible to have the stage "extend" when you click the button to show the whole movie clip?
ActionScript Code:
addPic.addEventListener(MouseEvent.CLICK, addImage);
function addImage(event:MouseEvent):void{
var mc:MovieClip = new testClip();
this.addChild(mc);
}
kinda like this i guess [URL] when you click on the flash on that page it expands and stuff
So what time trying to do is play a specific frame in the movieclip based on the time of day:
PHP Code:
onClipEvent (enterFrame) {
var myDate = new Date();
var hour = myDate.getHours();
[code]....
but when I change to "gotoandPlay" the movieclip just loads from the beginning frame and seems like it doesnt check the time.
Is there a way to fade a movie clip out based on the proximity of the mouse? Basically if my mouse is greater than 100 pixels away from a movie clip, I want the movie clip to fade to 0 and stay invisible.
View 4 RepliesI got a flash file which reads xml data and based on total data I need to duplicate movie clips and show them horizontally. Till now i have read the data and displayed it but dont have idea how to display them horizontally.
Code:
i = 0;
level = 100;[code]....
I have done this till now, it duplicates the movie clip but when i want it to change its x coordinate it shows error
**Error** Symbol=mc_contentHolder, layer=Action, frame=1, Line 20: There is no property with the name 'x'.
newClip.x = 328;
Total ActionScript Errors: 1, Reported Errors: 1
Basically what I'm trying to do is make a sundial-style clock animation. I'm using AS2 in Flash CS4. I'm still quite new to Flash so my AS know-how is slightly limited...
I want to get the time from the user's computer (I'm using getHours) and make a line (movie clip) rotate to a certain angle based on the hour. Eg. 1pm = 13 degrees, 2pm = 26 degrees and so on. This is the script I have so far and all it seems to do is rotate the movie clip to 90 degrees.
[Code]...
I'm creating a slideshow gallery in flash and am basically there now except for one bit...
have a look here [URL]
The slider at the bottom for the thumbnails moves ok but I want it to stop at the last slide. I
I can manage to code it based on the mc's _x value
i.e if (mc._x < -200){ //do nothing }
but this creates a dead stop and I want a gently slow down like if you were to navigate from thumb 8 back to 1.
all of my coding at the moment uses the mc's x value in relation to the mouse's distance.
The code I have currently set on the slider is:
Code:
onClipEvent (enterFrame) {
if((_root.slidesQTY>6)&&(_root._ymouse>460)){
if(this._x<0){
[Code]....
how I could add another if statement that doesn't halt the animation as it hits the last slide but creates a smooth slow down?
On Scene1 I'm trying to add some script that will continuosly recognize what the x axis value is and if it is greater than 600 it is supposed to play frame 1 of the movie, and if it is less than 600 than it is supposed to play frame 10. The code I'm using seems to work, but only at the initial startup of the movie. How do I modify this code to have it continually updating the shoot movie based on where the mouse is at on the movie?
[Code]....