I would like the loop to create the multiple setInterval's based off the array, but the function called is not clearing the setInterval...
var timecode = new Array(1, 2, 3, 4);
// use the array to assign the interval
for (var i = 0; i<timecode.length; i++) {
[Code]....
What im looking to do is dynamically create TextFields based on my array.length. So if I have 3 strings in my array then 3 TextFields with the array text needs to be created.
I've managed to actually create TextFields based on the array.length - however afterwards I dont know how to reference them individually, to lets say re-position x, y for array[1]. I've tried saving the Textfields in another array by .push method, but can't seem to reference them correctly.
//Create textfields based on data in Array - in this case 3 textfields
var textArray:Array = new Array('First TextField','TextField Two','Anything, really');
//Array to .push "save" created textfields
[Code]....
Is it possible to, if you have an array of class names like ActionScript Code: var city01names:Array = ["pic_01", "pic_02", "pic_03" ...] make a new array which would read these names, instantiate them, and push them into a new array containing the instances of all these pictures, which I could then use for a slideshow?
[Code]...
I have an array with many values pushed into it (happen to be names of objects). I am using a for loop to check all of the objects (by index number) for collisions, etc. Periodically, depending on a condition, I want to remove the currently checked object's name from the array list. I noticed that there is a problem if I immediately splice the checked name from the list. Namely, the list gets shorter, which is what I want, but not until I'm done checking all objects. Is it a good idea to solve the issue by incrementing i-- after the splice? I do this so that the object that used to be next in the list doesn't get skipped.It seems to work very well but I want to know if this is a lame/problematic solution and if there are any better ways of dealing with it
for (i=0;i<myarray.length;i++){
var ob=myarray[i]
//any old condition
[code].....
I'm trying to create a loop which generates a single series of sine results ranging from 0 to 1 based on 100 loops ( ie 0 ,0.011 ,0.1111........up to 1 in a single run)The results I want start at 0 and increment in a series up to 1 and then stop. I suppose this would be one half of a sine wave I have tried the following but it goes from 0 to 1 ,1 to 0 , 0 to 1 etc whereas I want a single straight run of 100 values from 0 to 1
I tried :
for(var i:Number=0;i<=100;i++){
trace((0.5*Math.sin(i)) + 0.5);
}
This does not work.
I'm having a big problem with my tile-based game. I create tiles based on a 2 dimensional array. Each tile is a Movie Clip, created using attachMovie. The problem is that when there are many of these tiles, the game lags, because so many properties must be stored for each MC. Is there a better method for creating "tiles" than attachMovie, or a way to free the memory used for each one?
View 10 RepliesI have a multidimensional array based data and i'm pretty confused in bringing it to simple linear array. I know it requires some for in loop to set property and its value and some nested looping but i lost in the half way.
I have following data
records:Array = [0]
name = gender;
records:Array
[Code]....
I want to create a site with a multiple file uploading through a singe button. And as I'm very new to the world of Web-Based Scripts
View 1 RepliesI would like to dynamically create elements based on the array. I would like to just put the array name and append _panel. so menu_item_panel will become settings_panel, info_panel,etc. I cannot figure out how to do that?
[Code]...
I want to make multiple empty MCs and fill each one with a thumbnail for a menu. I want to do this using for loops so I can control as many as I need.
What's the most efficient way of doing this?
I'm used to creating empty MCs in AS2, but I'm not familiar with the new display object way of handling this method.
So far I have this:
Code:
for (i=0; i<numImages; i++) {
thmb.push(gallery.features.image[i].@thmb.toString());
var imageLoader:Loader;
[Code]....
I put together this code that builds a container that contains boxes(squares) in an ordered way. Problem is when I rotate the container, the boxes don't stay in their order. (something to do with swapping depths I think) . In fact, they look a bit confusing. Just create a movieClip 24 x 24 and Name it Box. Create another movieClip and name this one Container. Save them in your library. Then just copy this code and compile. You know the routine.
[Code]...
i'm having a problem with a for loop. The problem is that it doesn't create multiple movieclips with an unique instance, i think it copies over itself.
for( var i = 1, x = -20; i < 4; i++){
if(this['plaatje' +i] != undefined){
_root.again.createEmptyMovieClip("image", i);
[Code]....
i'm having a problem with a for loop. The problem is that it doesn't create multiple movieclips with an unique instance, i think it copies over itself.
for( var i = 1, x = -20; i < 4; i++){
if(this['plaatje' +i] != undefined){
_root.again.createEmptyMovieClip("image", i);
this._root.again.image += _root.again["image" +i];
[Code].....
i have created a map from an array using a for loop via this code:
for (var k in map1[0]) {
for (var i in map1[k]) {
if (map1[k][i] == ground) {[code]..........
my question is how do i set a delay timer thing so i can watch it put down each tile ie. there is a half second delay between each tile being put down
I want to dynamically create variables that will create and place instances of a movie clip on the stage at runtime.[code]
View 5 RepliesI'm trying to create multiple Functions inside a Loop.[code]I essentially want to make 4 Functions called closeButOut1, closeButOut2, closeButOut3 and closeButOut4.This is the error message I get:
-1084: Synax error: expecting identifier before this.
-1084: Syntax error: expecting leftparen before rightbracket.
I wished to create multiple copies of a variable in a loop.such as:
var pots:String = thisString [i]
and then i wish to reference one of these loop generated variables.Now how would you set it up so you could have all those variables of "pots" had their own names so one could reference say: "pots1" "pots2" or "pots17" ? This kind of situation would bee seen in a situation where I would be bringing in many array values and assigning certain parts of them to the variables. such as array[i][name]
I'm attempting to create a graphical representation of the microphone activity in flash for a conference.
I got a movieclip called eqNotch that's just a rectangle and its linkage name is EqNotch.I also have a movieclip where I am writing my as3 on the first frame, its called dynamicBar and linkage name is DynamicBar.
I've successfully written the code for the dynamicBar to create one column of eqNotches and the number of rows is dependent on mic activity.[code]...
I'm building out the basic code for a timer that does 2 things:Counts down "bonus points" -- 10th of the total milliseconds in the timerCount down seconds and tenths of secondsThe bonus points will tick down along with the time -- this is part of a larger quiz interactive project that I'm putting together.I can't quite figure out the following (my math is bad, I think):Why can't the setInterval fire off in 1 millisecond increments? Is it too fast for the Flash Player to handle?What's wrong with my math for the milliseconds on the time? I'd like to ONLY show 10ths of a second instead of thousandths.
View 7 RepliesIf I have multiple variables of the same type, can I create an array and loop to create them or do I need to create them individually.
For instance,
var ajArray:Array = new Array(mc1, mc2, mc3, mc4, mc5, mc6, mc7, mc8, mc9, mc10, mc11, mc12, mc13);
for (var i:number = 0; i<ajArray.length; i++){
var [ajArray[i]]:MovieClip;
}
[code]....
can we create multiple dimension array?
something like this
array[1]['name'] = asdf
array[1]['age'] = 22
[Code]....
I'm relatively new to AS3. There's one thing that I don't quite understand about Sprites. I'm making a tile based game, and all the tile graphics for a level are inside one movie clip in each frame. Would I be able to go about creating multiple sprites based on the frames in said movieclip's timeline I would I have to go through and make a separate library graphic for each.
View 2 RepliesWhat I'm trying to achieve is that I'm planning to fetch data from an XML file in certain time sequences. For this I would need a simple function that has a growing variable. I tried to test this as a text field that would show my variable go from 0 to 2 with one second between each change - but I can't get it to work.
[Code]...
its me again I posted destroying MovieClips a few days ago now I'm working on the same project (you can probably tell I'm a beginner) and a new problem occurred I need a way to test if the EvilSlingFuzit collides with a rock, but there is more than one rock. I tried to create an array for the rock, but the rocks are created by the SlingFuzit so the Sling fuzit would have to do something like this:
[Code]...
Code:
_root.leftButton.onRelease = function() {
for(var i=0; i<6; i++){
animateThumbsToLeft(variable_1, variable2);
}
};
ok how and where do i put the setInterval script if i want to execute the "animateThumbsToLeft" function for 6 times and inbetween each time have a delay of say half a second..
how to call a function via setInterval a limited number of times (e.g. 20 times).
Code:
function CallMe(Me){
trace(Me);
}
for(var i:Number = 0; i<=20;i++){
setInterval(CallMe(i),3000);
}
My intention for the above simple code would be to have 'i' get traced every 3 seconds. But it doesn't. 'i' just gets dopped out into the output pane all in one go. Do steady release!
I have only been using flash for a few months and have not yet utilized setInterval. I have a loop that I want to run through once and then pause and then continue etc. So I can have each little test.swf pop up one by one rather than all at once
Code:
createEmptyMovieClip("menu", 10);
function createMenus() {
aMenu = new Array();
aMenu = ["test.swf", "test2.swf", "test.swf", "test2.swf"];
for (i=0; i<aMenu.length; i++) {
menu.createEmptyMovieClip("menu"+i, 100+i);
menu["menu"+i]._x = i*100;
menu["menu"+i]._y = 100;
menu["menu"+i].loadMovie(aMenu[i]);
}}
Trying to replace a timeline loop with a setInterval. For some reason, the function I am using to duplicate my movieclips is not working from setInterval but does work from a normal function call. Why would this be??? I know the functions is actually being called because I traced it. But the duplication of the ball does not.
birthBall = function(){
ball.duplicateMovieClip("ball"+_parent.counter, _parent.counter);
this["ball"+_parent.counter].colNumber = random(4);
this["ball"+_parent.counter]._x = _parent.column[this["ball"+_parent.counter].colNumber];
[code]....
I have some simple code:
function testing(){
for (a=1; a<=4; a++) {
this["btn"+a].enabled = true;
}
}
If i run this function from anywhere it works fine. If i run this function from myTimer = setInteval(testing, 3000); it will not work. If i add other random code into the function it (the newly added code only) will work. So i have narrowed it down to something about this["btn"+a].enabled = true; specifically that is causing it to not run.I really hope this makes sense, appologies, it's 3am :
i want to be able to create multiple shapes and store them perhaps in an array to be able to dynamically move them and change them.is there a way to have a shape object and store it an array?so that i can do something like shapeArray[0].x =100 current code
for(var i=0; i<10; i++){
var sprite:Sprite=new Sprite();
sprite.graphics.lineStyle(1)
[code]...