I have only one FLVPlayback in the stage but i need to load more than one flv files and collect them with an Array. Then switch one video to another.
View 2 RepliesI have five videos playing at the same time in a .swf. They are each .flv files of the exact same length, I'm keeping them external rather than embedding the files within the Flash, and it's imperative that they each play at the exact same time so I'm avoiding using streaming.They all need to be kept at the same time code as any other of the movies at any given time. Is it possible to make a scrubber or other controls that will allow the viewer to move positions within these videos simultaneously?
View 1 RepliesI have 1 flv with only 12 seconds of audio. another flv that is 10 seconds with only video another flv that is 2 seconds with only video Lets assume both video files are as long as my audio file. Which actionscript commands should I look further into to: 1. play audio simultaneously with video 2. play the 2 second video smoothly/seamlessly after the 10 second video is over as if it were a 12 second vide 3. if my audio or video were mp3/wma instead of flv would I run into trouble 4. I imagine a flash media server would be mandatory if my videos were other formats like avi/mpg and had to encode on the fly
View 1 RepliesI have been working on a flex uploader, where the user can select multiple files.It works fine when the files are uploaded in a queue (one at a time), however as soon as I try to have it upload 2 files at once I run into issues.
It seems that files will often lock up, and either stay at 1% until every other file is uploaded, or just not complete at all. There is never more than one file uploading at a time.Is there some issue with calling .upload on multiple files at once in Flex?
I'm trying to attach a single NetStream Object to two separate Video objects instead of pulling redundant streams from the server. The expected behavior would be for both Video's to display the same content. However, it seems that the last video I attach the NetStream to is the only Video that will display the content.Has anyone else run into this? I'd rather not go to the inelegant steps of using BitmapData to clone pixels if I don't have to.
View 2 RepliesI've been using the "Reusable Preloader Using MovieClipLoader" from the tutorial section of this site.The only difference is that i don't use'm for preloading jpg. I load external swf files containing video. Everything works fine so far. The only problem is that the preloaded video already starts playing while preloading (at about 30%), but without showing the video.This is the code i have so far:
Code:
bar._visible = false;
border._visible = false;
this.createEmptyMovieClip("container", "100");[code].....
Can't get this to work, and it only sends out an output error. The zombies.swf file is in the same directory so I'm clueless
import com.greensock.TweenLite;
import com.greensock.easing.*;
var loadBox:Sprite = new Sprite();
[code]....
I've built loads of preloaders in AS2 before. However I never ecountered so many problems as now. I'm confused about many things with preloading in AS3. This is my layout:I have a single frame on the first scene of my movie. The main content is inside a movieClip called container, placed on frame 1 of my next scene, which inherits from the class that holds the main code to initialize the game.(I read that this way my code will not try to access any movieClips, or sprites before they have been loaded... as they are not actually referenced from a document class).However my 1st frame where I have my preloader takes ages to load... My first question is... Does this happen because the loading procedure is different now? Or has it always worked like this... so that would mean that as I have many heavy assets in my library that are meant to load on frame 1. (Exported for actionscript in properties).I have a blank movie for a while. I'm using a simple code:
stop()
import flash.events.*;
this.loaderInfo.addEventListener(ProgressEvent.PRO GRESS, Loading);
[code].....
my site pretty much work like a slide show. the navigation (6 buttons) takes you from one place to another, moving the content back and forward. The problem with this, is that pretty much all content have to be loaded from start, sometimes when the page loads slow or you are on a bad connection, you get transported to a blank page, since that swf haven't been loaded yet.I'll give you my structure also.[code]If i could combine these two scripts, i think i could get the solution i'm looking for.
View 4 RepliesI'm an audiovisual interactive design student on a school that's screwed up. We work projectbased and this particular project requires a lot of flashstuff. But, we don't get taught anything by our teachers and we're supposed to find out ourselves once we need something with google and the likes. I wonder what I'm paying my schoolfunds for..Anyway! I'm working on my last project this year and it's an interactive DVD for our yearbook. On this dvd, several projects of students is displayed.
I've made a root.exe projector file that's small on size and only displays a picture, some audio and a button that activates another .swf with an animation to the next screen. I load this one with the loadMovieNum command. After this animation, it will load a new .swf (again loadMovieNum, and in the new one unloading the layer below it) with many active buttons and animations.. it's the biggest .swf I have and I don't think I can split it up.Locally.. everything works just fine with hardly any pauses between the files loading.When I test it on a dvd though, the wait time is about 5 seconds and flash seems to be freezing. This is because of the lack of a preloader and reading speeds of a dvdr driveI've been looking around for preloading external files and I've read alot about them.. and tried alot too, but I can't seem to get it to work. I believe it's because I'm using loadMovieNum instead of loadMovie. I tried changing the way it's reading containers to levels, but that doesn't seem to work.
I have a site at www.asylumartists.com , and when you enter the site, it says its loading 23 files. Inside my site swf there is around 12 videos on the main timeline, and each of them are flv components. Also my external swf files are being preloaded with:[code]If you go to the work section and check out a work, it doesn't start to preload right away. This leads me to believe that the content is having trouble starting because its trying to load so many files. Does anyone know a code that stops all loading at a certain frame? Once my site loads, it just stops all cache entrees, and when you select a work it preloads as it should?
View 1 RepliesI have been playing around with this for few days and I am about to give up.. I want to be able to preload anythything thats being loaded to a certain MC. but I dont want to have to set any VARS in the file thats being loaded to indicate its done loading. I could make each swf thats being loaded give a var stating its done loading and make the loader gone.. but I want to be able to preload any swf.. mp3.. jpg almost anything that I load into the target.. Let me know if anyone has created something like that before..
View 4 RepliesI am trying to preload dynamic swf files from an asset folder into a blank movie clip within my main swf file. Some of the files are 2+ mb and need to preload.
I am dynamically importing the swf files from an external asset folder into a blank movHolder movie clip on the stage of my main movie. I have this working fine. I am having a hard time knowing where to place the preload script (in the asset swf or in the movHolder clip), and whether or not my script is accurate for this procedure.
Inside of the movieHolder clip, I placed the preload script script on frame 1:
totalBytes = Math.round(getBytesTotal() / 1024);
loadedBytes = Math.round(getBytesLoaded() / 1024);
percentDone = Math.round ((loadedBytes / tatalBytes) * 100);
framesloaded >=100) {
gotoAndPlay("start");
}
On frame 15 I have a looping action that tells flash to gotoAndPlay(5); as it loads the asset to frame 100.
On frame 20 I have inserted the label "start".
Obviously my approach is flawed and does not control the dynamically loaded asset. I am assuming that the asset swf if loading on frame 1 and ignoring my code.
I'm working in Flash MX
I made a site completly in flash.
But to lower file size I made the each section a different swf file
when you click a link you will have to wait for that section to load, it would be good if peoples can see the loading progress while they r waiting.
And i hav added a preloader in each of the external swf file.. and then i realise that if i wanna change or modify the preloader, i will have to change all the preloader too.. this is really kicking axx..
is there a way where on the main page there is only 1 preloader needed to show all the external swf files loading progress? i am using an empty mc as container to load thoose external swf files..
how im trying to preload external swf files:[code]i am loading first four swf files from swf directory (page1.swf, page2.swf, page3.swf, page4.swf) - However, I WOULD LIKE THEM TO BE INVISIBLE WHEN THEY ARE PRELOADED TO THE STAGE.. how should i do that.. "fileLoad._visible = false;" does not work-
View 2 RepliesI've a function to check the preloading of external SWF files. The code is below.
Code:
function checkStat (){
tracker.onEnterFrame = function() {
loadingStatus._visible = true;
[Code]....
I am trying to preload dynamic swf files from an asset folder into a blank movie clip within my main swf file. Some of the files are 2+ mb and need to preload. Let me tell you what I have done so far, and hopefully someone can put me on the right path.
I am dynamically importing the swf files from an external asset folder into a blank movHolder movie clip on the stage of my main movie. I have this working fine. I am having a hard time knowing where to place the preload script (in the asset swf or in the movHolder clip), and whether or not my script is accurate for this procedure. Inside of the movieHolder clip, I placed the preload script script on frame 1:
[Code]...
i never had this problemdont know whats going on actuallyi embeb a flv video in a mci simply apply the same preload acs that i use for yearsand it only shows when is loaded at 90%not from the begginingi apply the same script to another video and it works
View 1 RepliesI have an application that has multiple concurrent netstreams going on in the background that are basically preload videos behind the scenes. From time to time, I need to give preference to one of the streams over the other, so I want to pause the preloading of all but one stream.
The only way, theoretically, that I could think of to do it is to set the maxPauseBufferTime to a very low number (say 0.1) and then pause the video. All of the preloading netstreams are already paused, so I don't know what it takes to make this kick in. I thought maybe doing resume/pause back to back would trigger the max buffer to kick in, and have it stop preloading, but it doesn't seem to be working.
No matter what I've tried, it continues to load the video. I've also set bufferTimeMax to 0, but still no luck. Does anyone know a way to prevent a netstream from buffering further until I'm ready for it to start back up?
I've made a video class that holds a video. I want to be able to create an instance of this class, give it a video to preload, check if its all preloaded, then start playing it.Currently the only way i can find to start it preloading is to call 'ns.play()', however this starts the video actually playing.Is it netstream that i should actually be using here?
PHP Code:
package{import flash.display.Sprite; import flash.net.NetConnection;import flash.net.NetStream; import flash.media.Video;import flash.events.*
[code].....
I wrote this script a while ago and it's worked extremely well for me ever since. I use it in nearly every project I do. But the other day I was asked to do a project where I could only use Flash 7.
This is a class I made to easily handle multiple file preloading by passing it an array of files to load. It only has two useful methods. One gets you the current total progress (total of all the files 0-100%) and an onLoadComplete. The actual usage is in the top of the file. It works great under Flash 8, so go ahead and use it.
I found out that I could only get the metadata of the 1st video I clicked. How does metadata works? It could only load once before the video ends?
Here's some example what I'm doing
//will be adding new video when this function is called
public function set newVideo():void
{
videoProperties();
[Code].....
I tried to load all the metadata at once, but seems like it needs the video to be play only it will manage to get the metadata.
I'm trying to preload a movie so that it doesn't stutter when it plays. So i thought preload the whole flv and then let it automatically play. I followed Adobe's tutorial [URL] on 'Controlling web video with ActionScript 3 FLVPlayback programming' and added a progress bar all using components. But I just can't get it to work, the progress bar disappears when it loads and the movie starts playing before its preloaded. Here's the online version; [URL] and I've attached the .fla too.
View 3 RepliesI am having an issue with tracking the progress of a URLRequest for a FLV file. My code is as follows:
ActionScript Code:
var backgroundVideoSourceRequest1:URLRequest = new URLRequest("video/loops/Loop1-1080.flv");
var backgroundVideoSourceLoader1:URLLoader = new URLLoader(backgroundVideoSourceRequest1);
backgroundVideoSourceLoader1.addEventListener(Event.COMPLETE, changeVid1Status);
backgroundVideoSourceLoader1.addEventListener(ProgressEvent.PROGRESS, video1status);
[Code]...
was just trying to make my site more efficient when its online. I have an image/video gallery. When the thumbnail is clicked, an image or video will be displayed in the container I have. Currently, the code is like
[Code]...
And if so, will it be in the cache or anything when it is loaded again within the click event?
I've tried exporting a MOV file using Flash 8. I've tried converting to a MOV using ffmpegx. Neither have worked.
View 1 RepliesI am running Media Server 3.5.2. The server is still non production. I copy video files to webroot/vod/video.flv. From the client workstation I attempt to access [URL] and get nothing. It was my understanding video's copied here could be viewed as such.
View 5 RepliesI am wanting to play a number of movie clips and flash produced video clips. On the main timeline I have a frame for each clip I want to play. In that frame is a flash movie that contains the video that I have embedded onto the timeline for the movie. The filesize for this project is massive and I am struggling to work on the file. I want to be able to play the video files with the playback component in each of the frames where the video was.
[Code]...
We have developed flash video player which needs to playe large videos (at least 500 MB videos).We have some issues in the player right now.I am playing a 100 MB + video, it start playing and say it is buffering upto 50% of that video. Then I am closing that page. If I take that video again, it starts downloading from beginning. It never resume downloading from where it buffered previous time. But for small video files, this is looking ok. Is there any size limit a video player can buffer?Is there any better way to play large videos (more than 500 MB). Any other protocol or any other settings in flash player?
View 1 RepliesI have no experience with Adobe Flash because others have done this out of house in the past. (time has come for me to learn - quickly)
I need to simply create "swf" files from a number of videos I have finished in Premiere Pro 5.5.
These videos are 800 x 600 videos that display at "point-of-sale". The spec is swf and not flv.
(I do not need to do anything else in Flash apart from create the video file with the swf extension.)