ActionScript 2.0 :: Showing That External Movie Clips Are Loaded
Dec 12, 2004
On some sites i have seen usually portfolio or gallery type sites there are thumbnails, text or some shape that you click on to view a particular image. What I'm getting at is some of the sties show visually that the clip has been loaded with change of alpha (images that are not loaded greyed out and ones that have already been loaded are in colour etc..). An example of what i'm talking about is on [URL] When you click on the menu (selection uno), it loads a particular clip, and throughout the session on the site, u can tell which ones have been loaded and have not. I know there are probably many down and dirty ways of achieving this, but i know there is usually 1 or 2 'proper' methods for doing a particular thing.
View 1 Replies
Similar Posts:
Dec 12, 2004
On some sites i have seen usually portfolio or gallery type sites there are thumbnails, text or some shape that you click on to view a particular image. What I'm getting at is some of the sties show visually that the clip has been loaded with change of alpha (images that are not loaded greyed out and ones that have already been loaded are in colour etc..).
An example of what i'm talking about is onWhen you click on the menu (selection uno), it loads a particular clip, and throughout the session on the site, u can tell which ones have been loaded and have not.I know there are probably many down and dirty ways of achieving this, but i know there is usually 1 or 2 'proper' methods for doing a particular thing
View 1 Replies
Jul 28, 2010
I have 3 movie clips (Header_mc, Logo_mc, Introduction_mc) which all comes animating on stage at one time. Which looks all mess. What I would like is.
1)Logo.mc (Instance Name:Logo) comes on stage first after 5 Seconds
2)Header_mc (Instance Name:Header) should come second ater 5 Seconds
3)Introduction_mc (Instance Name: Introduction) should come at last
and I would like to do it all by using Actionscript 3.0 instead using Timeline in movieclip itself.
View 6 Replies
Mar 23, 2012
I'm working on an educational Flash animation. In one scene I have 4 buttons which need to show different movieclips. I have created all 4 movie clips and inserted into one layer in 4 frames, one after another one. I also gave the frames specific names. Then the buttons are all in one frame with a name so I could call it when we're on "rollout" mode. Now, when I go over the first button it shows its movieclip perfectly but the second one show two, overlapping, with the previous frame! I did also deleted the previous movie clip but still get the same error!!!
Here is the code that I use:
on (rollOver) {
gotoAndPlay("lobes", "think");
} on (rollOut) {
gotoAndPlay("lobes", "lobes-button");
stop();
}
lobes is the name of the scene, think is the name of the frame which has the movie clip and "lobes-button" is the name of the frame which has all the buttons without any movie clips.
View 5 Replies
Oct 4, 2010
Problem that I want to share with you is that I have two external swf. One is swf generated by Flex IDE and second one is generated by Flash IDE. When I load flex swf, loading progress output is not showing until the whole file is loaded. This problem is not presented when I load flash swf as you can see on this testing page 90.157.198.254/test/test.php.
[Code]...
View 4 Replies
Jul 6, 2009
I'm trying to use the scroll pane component for the first time, and I've spent most of the day getting nowhere. Based on my experience with other components and with loading content into movie clips, I expected that I would point my scroll pane to its content and be off and running, but that hasn't happened.
[Code]...
View 4 Replies
Dec 8, 2009
This is my final project for a multimedia class I have, a link of which is here[URL]...Basically, I have a movie clip instance (loader_mc). I have the buttons loading external swfs with this code:
[Code]...
View 9 Replies
Sep 14, 2010
I have a menu bar that has 2 Drop down menus. Each drop down is a separate movie clip, with 3 buttons inside that are separate movie clips. I have a class set to the buttons that are movie clips for a roll over effect. But when I mouse over it does not work. Also on the main time line I tried to add a like to a web page but it did not work. But I only have this problem with the movie clips that are inside the drop down movie clips.
Why is this? How do I add roll over actions and external links to movie clips that are inside of another movie clip? I really need some help this is a problem I have been having for about a month or more. I am still a AS3 newb and this is my first time using classes. The other classes I have work with everything else, Im just having trouble with the movie clips that are inside movie clips.
View 11 Replies
Aug 7, 2009
I wrote some actionscript that would load in different values from an xml file in order to play certain movie clips at certain times from a specified swf file. It actually works for the most part. I think the problem happens when I select a movie clip that was already previously selected. It actually won't load it at that point. I will post actionscript in the morning, but I feel like this should be a rather common issue, and I just don't know some general piece of info. I use an actionlistener to load the swf. I create an associative array that works as follows [action] => movieclip Then on an action it will make a movie clip object = loader.content.getChildByName(theActions[action]);
View 4 Replies
May 7, 2010
I have a movie clip where I store a value in a variable called "yourname" and then load a different .swf file in level 1. I display the value of "yourname" in a dynamic text box, that works fine. I then move on to a frame where the user has an input text box and can re-enter a value for the "yourname" variable, and then clicks a button symbol to reassign the value. Bear in mind, "yourname" was not originally stored on this level and this movie clip, it is stored on level 0 on the first (main) movie clip. Here is my code in the button:
on (release) {
_level0.yourname = String (inpt_newName.text);
}
inpt_newName is the input text box. My intent here is to have a "main" timeline where variables are stored, and then load and unload various .swf movie clips as needed, storing and variables (i.e. decisions) that the user makes.
View 1 Replies
Aug 12, 2010
Ok, I'm using actionscript 2.0, and I am trying to make a scrolling image gallery. I have a movie clip with three layers. the first contains a movie clip used as a scroll bar. The second is a mask used to hide the overflow content, and the third contains movie clip thumbnails. when I click one of the thumbnails, it loads a symbol containing a larger version of the picture over top of the thumbnails on the same layer. My problem is, the large image is added at the very top of the movie clip, even when it is scrolled out of sight. I want it to appear in sight, so the user doesn't have to scroll all the way back up to the top to see it. This is annoying and confusing. Is there a way to do this?
Here is the code I used to create the scroll effect (there is actually a whole lot more to the code but it is very long, so I am not adding it now. I will if it is needed though)(Oh, and there is no text involved in this. I just got this code off a tutorial and I haven't changed the variable names yet)
var scrollUpper:Number = 58; var scrollLower:Number = 309;
var textLower:Number = 60; var textUpper:Number = -179;
var scrollRange:Number = scrollLower - scrollUpper; var textRange:Number = textLower
[code].....
View 3 Replies
Jul 7, 2009
I try to code an as3 where I need to duplicate a mc casted from objects, which are loaded from an XML file. My goal is to make a wrap around effects for animated menu icons that use separate swf files.this is the function I try to create, but my concern is in the else statement:
Code:
private function onItemLoaded(e:Event):void
{
loadedItems++;
var contentitem:MovieClip = MovieClip(loader.content);
[code]....
in the copyFirst/Last declaration I try to dupe refFirst and refLast... but It seems not to be the good way (error).
View 2 Replies
Feb 9, 2010
So I am loading an SWF like this:
ActionScript Code:
public function layoutLoad(e:Event):void
{
FlashConnect.trace("Display.loadLayout()");
[Code].....
It will compile but I get a "Cannot access a property or method of a null object reference." So I am not targeting right. I did double check my instance name is correct and in the root of the loaded SWF
View 2 Replies
Mar 3, 2004
Im creating a booklet with turning pages, like the one previously posted, so all the content is loaded dynamically.On the right hand page i have text, of which some lines are interactive.On the left page, i have a hidden text box. When the user clicks on a certain line on the right page, the text box on the left page becomes visible, and the relevant txt is loaded into the text box.Now, i can make the text box on the left page invisible by placing _visible = 0; directly into the actionscript pane of the text box.What i cant do is make it visible by clicking on the right page text. Where should i put the code to make the text box visible?Is it as simple as movieClip._visible = 1; ?
View 10 Replies
Jul 16, 2009
im using this function to load my movies
[Code]...
i then place them into a grid (i load them into a created movie clip called thumbnail) and they are supposed to trace their name (or anything) when rolled over, but i cant put a working rollover on them, nothing happens with perfectly fine code. how to get loaded movie clips to work with button functions?
View 6 Replies
Apr 1, 2010
I'm building a flash player that loads various movie clips in succession depending on user input. The player should continue to play seamlessly when one clip ends and another starts playing, however there is always a slight noticeable delay between the COMPLETE event for one clip and the actual playing of the next clip. I am using the FLVPlayback component to load the video clips, with successive clips loaded in different players in the component.
I've tried playing the next video a short duration before the current video finishes by adding a cue point just before the end of the currently running clip (about 200 - 300 ms before the end). This improves matters somewhat, but it is not a reliable method as the timings are different for different browsers and computer specs. I was wondering if anyone here has any experience with smooth transitions between external video clips and could suggest possible optimizations I could use to improve the transitions.
View 2 Replies
Feb 9, 2003
I have a movie that loads multiple swf's... Some of these have buttons inside of movie clips, they don't work when the swf is loaded
View 1 Replies
Jun 1, 2006
I have approximately five external movies I am loading into one main movie. I load the movies using various buttons in the main movie.
My issue is this...I press a button and the first movie loads and then runs to the end of the timeline. Works great.When a push a second button the second movie loads and runs to the end of the timeline. Works great also.but I hate how there is a blank space between the movies.
All the movies start with a white stage and end with full graphics. When I press a second button, the movie on the stage disappears immediately and I am left with a white stage for a few seconds while the loading movie animates onto the stage.
I want there to be a cross-fade or some effect that allows the loaded movie to remain on the stage while the second movie is loading. Is there a way to make this happen?
I'm including the code I have for loading movies so you can see what I am working with thus far.
Here is the code:
designingbutton.onPress=function(){
loadMovie ("Quest Wall Animation.swf", "_root.content");
}
specifyingbutton.onPress=function(){
[code]....
View 2 Replies
Feb 3, 2010
I'm still a noob with flash. But I'm attempting to make my website using itSo far I haveseveral swf files that are all loaded into a "index" swf file.So all the code needs to work with that chain of MC's:_root.LoadedContent_mc.LoadedContent2_mc.Page1_mcThats the path to where I am working..Page1:I'm attempting to create a downloads list here. I have a phpfile already worked out that scans the directories "downloads" and "imgs", and generates a list of file names. It then formats each file name into a path to that file. And turns each path into a variable that can be loaded into flash.So basically after php does its thing we are left with this:
Code:
File1=Pages/PageData/Page1/Downloads/SomeTextFile.rar&File2=Pages/PageData/Page1/Downloads/SomeTextFile1.rar&File3=Pages/PageData/Page1/Downloads/SomeTextFile10.rar&File4=Pages/PageDat
[code].....
View 1 Replies
Aug 3, 2009
I'm making a very simple cross-fading slide show of JPEGs loaded from a folder. I'm loading them into movie clips with:
Code:
holder1_mc.loadMovie("images/home_flash/image1.jpg");
holder2_mc.loadMovie("images/home_flash/image2.jpg");
[code]....
View 2 Replies
Mar 2, 2010
I am currently trying to load a movie clip in the main SWF. Got that done.Then call and replace the first movie clip with another, got that done too.This is for a menu i am making, I am not too great in action script. I am working in AS2.Problem is after I call the second external movie clip into the main SWF, it all stops working.Is there a way I set this up that no matter what it keeps loading and unloading the external movie clips? This is what I have so far.[code]This starts with the "king_menu.swf" already loaded, i have it unload it and load "dqueen_menu.swf" to the call point named "load_king".I am guessing I need to have a universal call point for all my external movies to load and work in a random chain.
View 10 Replies
May 14, 2010
I need to load files from the library of another .swf file (AS3). How to accomplish that?
View 1 Replies
Oct 7, 2010
I'm creating a Flash interactive thing which is basically a couple minute animated intro and then a menu of products to choose from. You click on one of 12 products and get a little animation about how it works. So my question is where to put these 12 product animations? I was originally thinking to just put them in the main timeline and just jump to them with labels but I'm thinking that the timeline is going to get too hairy, it's already got a lot. Now I'm wondering what the best approach should be. Should I produce 12 external SWF movies to be loaded when clicked on, or should I just make each product animation an internal movie symbol and just add an instance from the library to my main timeline? Or is there any other approach that might be better for some reason?
View 5 Replies
Sep 10, 2009
On one of the pages, i've posted 6 pictures, and make them buttons. And when i click on them, i want to pop up a player with a FLV video clip. FLV video clips that are located on my hard drive and in the root directory of the site. I didn't want to use one of CS3 players, so i have embedded a flvplayer (JW, i think).And, for two days, i search the forums for the AS3 code to make this work, and no luck. And here, i observed that the users get help. Probably it's easy enough for AS3 users, so nobody have problems with this, and for that reason i didn't find posts with this problem. However, if that doesn't work with an external player, i'll do it with whatever player you say.
View 2 Replies
Mar 8, 2010
I want to have two movie clips that each have their own button leading to an external URL. Both of these movie clips have classic tweens (only making them fade in and out).If I do one, it works, but when I do two, it fails on me! The error message I always see is "TypeError: Error #1009: Cannot access a property or method of a null object reference.
at mh2_fla::MainTimeline/frame1()"
I have tried doing them in the same scene and on separate scenes (see attached).
View 3 Replies
Jan 29, 2003
I'm writing a preloader to load external movie clips but my function doesn't seem to be working properly. I call the function and it says that 100% is loaded and makes the movie clip thats showing the out put invisible...thats what supposed to happen except for the going to 100% straight away. the percent is being calculated properly but i think that the function is being executed before the new movie even starts to load...i've tried movieClip.onData but it doesn't seem to work..
Well heres the code
Code:
function loader() {
percentClip._visible = true;
targetClip._visible = false;
percent = 0;
[code]....
View 1 Replies
Nov 25, 2006
i'm trying to create a simple site with three buttons and three different screens rotating (so if one button is clicked the current screen fades out, a new one fades in, then when a second button is clicked the same thing happens and so on).i was using the tutorial found [url]my problem is that i need everything pre-loaded from the begining. i was trying to create a preloader that loads all external files, but it would be a lot easier to have the different screens as movie clips in one file. the problem is, i'm not sure how i should modify the code to place a movie clip in my "container", rather then load an external file...
[code]...
View 3 Replies
Oct 31, 2010
I am new to AS and stucked in a situation. I have a keyboard in which all grayed keys are single image but another layer have all active keys as separate movie clips. What I need to do is get external variables and make the opacity of relevant keys to 100% rest buttons should have opacity 0
like i receive variables key1= F10, key2= R key 3= pgdwn on flash file only these 3 movie clips will have opacity 100 rest all should have opacity 0. external variables can have any number of variable keys ( like 1 key to full keyboard).
View 21 Replies
Sep 18, 2011
This is my first time working with As3 and im a bit lost, everything is so different from the old good As2... what im trying to achieve is to create a simple virtual tour, i have a map with a few buttons on it that when clicked should lead to a panoramic swf that contains a picture of that particular place in the map. I already have the map and the panoramic swfs. But im clueless as to how to actually put them all together in one document. I tried by using this method but for some reason that loads just the panorama swf and not the picture inside it.
[Code]...
View 0 Replies
Aug 4, 2008
I generally don't mess with the timeline, but I need to for this project. In a nutshell: user can customize a product reference sheet with her choice of crossection, footprint, etc. All those choices exist as external swfs. In order to be legible, the reference sheet must be two pages.I know how to print multiple frames with Flash. But what I cannot yet achieve is loading external swfs into movieclips on different frames, and then print that. Here's my code from a test fla:[code]Now, this code will print both frames as separate pages, but the loaded image in printArea.holder2 does not print!
View 3 Replies
