i have a timeline animation inside a movieclip.it contains bitmaps. when i set the movieclip's alpha 50 etc, i cant see the alpha effect on the bitmaps except for bottom layer.that simple animation seems like these and i cant understand this situation
View 7 RepliesI haven't worked with AS3 for a few months, and even when I did I never took the time to learn it to extensively ..
I'm creating an isometric map editor, the bitmap that I'm using to take the tiles from has a transparent background, but when I draw the tiles to the main bitmap it displays as white, so it messes up the overlapping (since they're isometric).. How can I make the background of it transparent?
[Code]...
I'm loading an image in a UILoader Component (created during runtime).
var lb:UILoader = new UILoader();
addChild(lb);
Now when I load any image into this then it loads on top of everything.I know this is because it goes over the top of stack. But is there any solution by which i can move it downwards or even at the bottommost layer. I've tried setChildIndex(lb, 0) though but it didn't work.
when i attach a movie clip is it possible to draw it on the bottom layer of my clip?i'm generating a star field, btu the stars keep appearing on top of other static images.
View 4 RepliesI have some floating window that opens above my page. The problem is that I don't want buttons above to be trigerable. I tried to put an movieclip on bottom layer of floating window and tell him not to show hand cursor, but it looks as if my floating window is transparent. I could still push buttons below and cursor would change into hand. [URL] go to button "ostalo" and click any of galleries. Then go over reed floating window and you'll notice that you can push buttons underneath.
View 1 RepliesI have this tutorial code from AS3 Cookbook, fog like effect on Bitmap data
Code:
import flash.display.Sprite;
import flash.display.Bitmap;
[code]....
How can I punch out a alpha hole with the blue circle in the red circle with code? I can't wrap my head around setting up the blendMode properties.
View 1 RepliesI'm struggling to create an effect that I thought wouldn't be to complex to complete, however several hours latter...still can not make it work.
Using Motion tween Im attempting to make an image fade up! Meaning the image slowly fades up from the bottom of the image until the whole image can be seen.
I've tried using the fade effect and adding a masked layer that's tweened, however it fades in very harshly indeed, with the line of the mask very obvious.
Is there any way that I can do this so that it looks smoother and the line is less distinctive.
How can I make a shine effect with different intensity depending on the bottom logo?
(See attachment).
I have an .5 alpha layer that I want to fade out when any 1 of 5 buttons is clicked.
1) The alpha layer is on the screen, but its not at 50%, its solid
2) Its not fading when a button is clicked
3) Its not in the right position
4) I am getting an output error message that says:
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@3f7e34c1 to colorbars.
at flash.display::MovieClip/gotoAndPlay()
at Colorwheel/goColor()[Colorwheel::frame1:17] (
This code is telling the int_btn to go to the alpha layer frame, which continues thru frames 1 and 8) the code they are referring to is on frame 1 with a button that is also on frame 8 that I don't want the mouse up function to affect the alpha layer. The 4 other buttons on frame 8 should affect the alpha layer. The code on frame 8 tells the mouse up function to fade out the alpha layer:
var colorscreen:colorbars = new colorbars;addChild(colorscreen) //this is working its the alpha layer mccolorscreen.x = 0;
//this is not workingcolorscreen.y = 51;
colorscreen.height = 513;colorscreen.width = 612;colorscreen.alpha = .5; //not working
// all buttons below work but wont fadeout the alpha layer
[Code] .....
How do I tell it not to listen to the int_btn on mouse up? Should I be using an array or enter_frame or remove event listener or use all three to achieve my goal of fading out the alpha layer when any of the 4 btns are clicked?
I would like to create a dynamic 3 layer image that can have any of the 3 layers changed. i was thinking of doing this with alpha mapping where I have a back, middle, and front layer each defined by an alpha map. So if the style or shape of these changed I just render the texture with a new alpha map to define what portion actually takes the texture. So for each of the 3 layers there is a type(defines the shape), the texture which is applied to the shape, and an alpha map that is used to specify how the shape takes the image.
Imagine a fruit basket that can have the fruit switched out or the basket, and any combination of textures applied. You could potentially see the inside of the basket which may have a different texture than the outside. The fruit would all be one image that would then fit into the basket, and finally the basket would render. Then if you swap the color of the basket but keep the same model it would update, and you could then swap the model of the basket and keep the same color. But i'd want to do it where I have 1 texture that can fit over all the baskets but is just chopped off using alpha mapping.
Inside movieClip container, there are colored buttons on layer1 and on layer2 there is movieClip square which covers the buttons. I want to use the color efffects and blending options of movieClip square to make layer 1 alpha. There are some blending options called alpha, difference, lighten and substract but Im not getting the right combinations. I want to make layer1 alpha only by using layer2.
View 1 RepliesI am using flash to create an animation where text, once converted into a movieclip or a button, fades at a certain point. To do this I am using the text tool and converting the text into a movieclip.
I am trying to make the text fade away by using the alpha property, but the preview will never adjust the movieclips alpha value. I've tried embedding the font and linking it but it still just doesn't work.
Taken from http:[url].....Creating the DNA effect like in the FlashBox banner.Create an object like the one shown below.Give it an instance name of dna1.You can use any colours but the colours I used are as follows: A radial gradient set with colours from left to right:
255.255.255 at alpha 100%
255,255,200 at alpha 50%
255,255,255 at alpha 100%
243,126,12 at alpha 40%
255,255,255 at alpha 0%
Now create a layer and name it actions. In the first keyframe give action:
Code:
for (i=2; i<30; i=i+1)
{
duplicateMovieClip ("/dna1", "dna" add (i), i);
I have a series of nested movieclips that on rollOver they come to full alpha value and on rollout they go to like 20 alpha. In one of the clips it has a scroller but when I apply the alpha effect it makes the scrollbar not functional.How can I make an alpha effect like this with making everything inside the MC functional?I was using this type of code by the way: my_mc.alphaTo(20,1);
View 7 RepliesWell I have this interactive design for a website that I am making for myself. The problem is that on the top layer just under my actions layer I have a texture that I use to give my whole design a really nice feel even the buttons. The layer is blending using multiply in flash even tried a soft light blend using an external swc but it was slowing down my animation to much. Anyway my buttons are underneath that layer so it gives that really nice effect to them. How can I get around this cause when I publish I cant click on any buttons since the layer above them seems to be blocking them which is the texture layer?
View 3 RepliesI'm trying to figure out the best way to compare a single bitmap against perhaps an array of saved bitmaps to see how close of a match it may be to any one of the bitmaps stored in the array. Right now I'm running a for loop that uses the bitmapData.compare() method to try to compare to see how much of a variance there is but... to be honest I'm at a loss as to how to use the resulting data to do so. Does anyone know of any good method to accomplish what I am trying to do? Forget looking at my code it's a waste of time because simply, it's not working.
View 4 RepliesI have the code below positioned on a keyframe in the main time line which gives me a grid effect using the instance 'cube' of the MC 'cube.
gridy=30;
gridx=30;
num=0;
for (var i=0;i < 10;i++)
[code]....
The effect i want though is for the reduction in alpha to stagger from instance to instance, whereas at the moment they all fade together. Is there a way of tweeking the code i already have to achieve this staggering effect or does the whole thing need re thinking.
I am creating a 50 state map. You can see the swf right here - URL... am trying to quickly make it so each state fades to 50% opacity on rollover. But I haven't been able to make it work.[code]
View 7 RepliesI have set up a site I am building...real basic I know.rolling text boxes).So Here's my question...when you use the load movie command...in this case, I am using buttons on my main nav (level 0) to fire the load movie command for subpage swfs located on level 1...is there a script that I can write that would make the level 1 swf fade (dissolve) on using the _alpha command instead of just appearing (from thin air...like a cut in videospeak)???. Is there a way to create a similar transition for unloading the swf as well?
View 2 RepliesIs it posible to realize a alpha tween effect between two images with an interval of let'ssay 7 seconds, based on ActionScript.
View 3 RepliesDon't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesBelow is the code for dynamic image gallery from XML.
We have an alpha effect to the image animation when the image is loading. The affect is working fine (fade in).
But, when the next image is loading, we want fade out alpha affect to the current image before the next image loads.
delay = 6000;
//-----------------------
function loadXML(loaded) {
if (loaded) {
[Code].....
I'm creating a mask effect. i create 10 movieclip with a library class reference that appear on the screen with a random alpha effect. THe problem is that if i try the effect alone all works ok. if i mask the layer that contains the effect on an image i don't see the effect. i see directly the image masked with the boxes. i can't explain that because i've the effect first but it seems that when i test the movie the effect doesn't play and the boxes appear directly on the screen.
View 5 RepliesI am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 RepliesIm creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 RepliesI can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesI want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesI have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.