I cannot seem to get the Object Actions Panel to display or I just cannot see it for some reason. I am trying to add ActionScript for a button.RESOLVED: I moved the status/toolbar from the bottom to the side and lo and behold THERS MY Object Panel.
View 4 Replies
I am unable to view the Actions Panel window in a document I've already done a lot of work in. It worked previously - I created an Actions Layer and was able to add action script, however, when I try to open it back up to edit the action script I wrote, neither the F9 shortcut nor the Windows>Actions pulls up the Actions Panel. In fact, when I try either method, nothing happens.
View 3 RepliesOn both my work and home computers I have this problem where the font in the action panel gets all screwed up and the ends of words get cut off even though the text is there and working. Anyone have an idea on how to fix it? Both computers are Macs running 10.5.5 and Adobe Flash CS3. See below for an example
View 1 RepliesI have finish my site and need to know how to embed my font. I know about going to the library and clicking new font then going to linkage, but I don't know the action script to put into my actions panel.
View 4 RepliesFor some reason, I can't select the current Frame in my actions panel. Therefore, all actionscript ends up in Frame1.
View 4 RepliesI hit some random key on my keyboard while writing AS3 and I activated Paragraph symbols (see attached image). How the heck I turn them off??
View 1 RepliesThis is kind of a lame complaint, but any benefit I have gained from upgrading from CS4 to CS5 is being eclipsed by the frustrating change that while I am trying to use the "Find" tool in the "Actions" panel, as soon as I hit "Find Next" the Actions panel closes and I have to close the Find tool then re-open the Actions panel then again to see if it found what I was looking for then re-open the Find tool if I need to go to the next instance. I know this does not seem like the biggest of deals, but is there a way to fix this?
I will also add that this happens when the panel is clicked from the icon. If the whole panel is free floating it works fine, but then it is obviously blocking the whole stage, and I have to collapse it to an icon to see anything. There is also the possibility that it is computer/OS difference since my CS4 machine and my CS5 machine are two different computers one running XP and the other running Vista.
Is there a way of importing my class using the Actions Panel on frame 1.[code]No errors but the constructor function does not run, how do I get this working? (Everything is fine when I use the Document Class box and typ in the name of my class - but I want to do this on the first frame of the main timeline).
View 5 Repliesanyone has any tips about why i have these yellow marked classes in my actions panel?
View 3 RepliesI'm trying to create text using html so I could format it in html.So I created a textbox, gave it an instance name, selected "Dynamic Text" and clicked "Render text as html".When I click F9 (to get to the Actions Panel) to insert my html code, I get the message "Current selection can't have actions applied to it".How do I insert html into the Actions Panel to format text?
View 3 RepliesI have a movie clip with an actions layer. Can I call a function from an actionscript file from the actions panel?
View 2 Repliesi have a movie clip with an actions layer can i call a function from an actionscript file from the actions panel?
View 6 RepliesWhat do the little red squares on the lower left hand corner of the movieclips in the actions panel mean? [Fig. 1]I'm working off this template in Flash CS3, that's using ActionScript 2.0 actually. I don't know whether or not that means anything in regards to the above inquire?
View 7 Replies have only been animating for several months now. I am now trying to get into simple games, and I am starting with what I was told is the easiest, a Dress-Up game.This is the source of the tutorial that I am following: http:[url]....
I am following the Dress-Up game. I have created a button, dragged it into the Movie-Clip, and then went back to the scene, and selected it, right clicked, and clicked Actions."Current Selection" is selected, and it says "Current selection cannot have actions applied to it".
when I try to add this action to Scene 1, or Symbol Definitions it is a syntax error, and says extra characters as the reason.The script I am trying to use to make my Ball movable is;
on(press) {
startDrag(this,false);
}[code]....
I have a bunch of code inside my actions panel but I want to switch it to being in an AS file which would be external to the FLA file. I am looking for a tutorial or data on this. What terms do I search under?
View 6 RepliesI was wondering how to distort a Flex object like Panel so it looks like a trapezoid?
View 2 RepliesI have a flashslideshow with three buttons.
1.slideshow play(which is a mc with frame labels open and closed)
2. next button
3. prev button.
My problem is that when either button 2 or 3 are pressed during the slideshow it doesnt reset my slideshow mc button to frame label "closed".
I am creating an animated menu for my personal website. All I need is a MouseOver and a MouseUp event on the same object. Because of the scrolling nature of the menu, I need to have MouseOver events on each menutab. Each menu item is hidden until a MouseOver event, then it scrolls out to reveal its title. If the user clicks on the now-revealed tab, it should become the current page. If the user does NOT click the now-revealed tab, it reverts to displaying the current page's tab instead.
This means that I need to have a MouseOver and a MouseUp (or Release) tag on my items. Since I probably confused you all as much as I just confused myself, here is the example. [URL]. The "Family" section should be displayed. As you can see, when the user runs the mouse over other tabs, they are revealed. When the mouse goes away, it reverts to the Family section because nothing else was selected. The menu operates on frame 2 - frame 1 sets the initial variables as shown.
Code:
var sel = "family";
var games = "0";
var movies = "0";
var artwork = "0";
var yugi = "0";
var about = "0";
var links = "0";
Frame 2 operates my rollovers in a frame action as shown.
[Code] ......
I've finally got the animation and MouseOver events done - all I need is a MouseUp event! Why it doesn't accept MouseUp or OnRelease events? This is, of course, a work in progress. A few artifacts of testing:
* The green squares on the left of each tab are invisible buttons to activate my rollover. I wanted to see them during testing.
* The blue rectangles sometimes visible over the tabs' text was a theory gone wrong; I was hoping I could click those rectangles, which are buttons (which would be invisible) to initiate the MouseUp event instead of the actual tab, which is a movie clip.
* Needless to say, graphics are temporary! LOL
* Coding is also not optimized yet, so it's a little messy for now.
i'm using .position with an mp3 sound object to create a timer which i'm using to trigger actions in my main movie:
_level0.theTime =Math.floor(soundTrack.position/1000);
//on enterframe event
if (theTime==10){
[code].....
I just downloaded Flash CS5 for mac which installed without any errors. However, when I first launched the software I am getting the following error: The following panel layout is missing or could not be read: /users/rob/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Workspace/Essentials.xml The application will not have a correct layout. load one from Windows ->Workspace Once past this message none of the panels load.
View 3 RepliesI have a map in a panel.When maximizing the panel,the map remain the smaller size.How to make the map growing synchronizely with the Panel? When maximizing the Panel,I added Resize Effects.How to apply Resize effects on the Map when the extent of the map changing? It seems to me that I should dispatch extentChange event when maximizing the panel.
View 1 RepliesI discovered this while doing some programmatic panel resizing:Components in a spark Panel will still be visible when their location is outside the physical Panel boundaries. This does not happen with the mx Panel.unning Flex 4.1 on Windows 7I tried putting mx and spark controls in the spark Panel, and they both appear outside of the boundaries. Note this doesn't happen with the mx Panel. What am I missing to make the spark behave like the mxSample Code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code].....
I want to create a panel docking to a pop up panel in my flex app, like Winamp's playlist window can dock to main window. but I didn't find any useful on docking in flex
I've traced the PopUpManager, but I didn't find any available interfaces or events about popup window's moving, I think it's design shouldn't be so bad.
Does anyone knows of a way to get the output panel in flash or the console panel in flex builder or flash builder, to format the "traces" with html or any thing else? for example:
trace( <b>brett</b> ); and to get that to appear in bold in the console window or the output window?
I have a series of frames one the timeline. Each frame has a graphic and a mouse click leads to the next frame. Think Myst.
[Code]...
When the middle frame is returned to, clicks no longer change anything. I believe that the actions of the 'left' frame are replacing the one's in the middle frame so then it is told to gotoAndStop to itself.
I'd like to know if that is indeed what is happening and how I can make it stop.
1. Can i put another set of actions in frame 2 of the actions layer?i tested but it doesn't seem to work..it has 836 rows of code and it's getting annoying when tryin to search for a function..
2. I am not that familiar with classes, i usually put all the code into movieclips or in actions layer.. i am not sure if i can call a function from a actionscript class..
3.I am curios if there is any way i could specify an alternative for the if statement like in this pseudocode:
if ( apple is not clean BUT is tasty)
{
eat(apple)
}
I've got an object (an instantiation of my own class that extends Sprite) being created in the actions for a frame, like this:
Code:
import Scripts.CFoobar;
var foobar:CFoobar = new CFoobar();
[code]........
I'm running macromedia flash mx, and I'm trying to make a linkable swf by following this procedure: I select the object and then convert it to symbol. Then I choose " button " Right click at the object---> actions ---->[+]--->browser/network ----> getURL. I type my url and choose 'self" target.
When I test movie the hand symbol appears at first, but when clicked it turns to arrow. Exactly the same happends when I appload the swf and of course there's no link ...
I have basic movie clips, On roll over, show arrows [NEXT, PREVIOUS] on movie clip [they then show other images inside movie clips]I can show arrows on roll over.But when i roll over the arrows the main ROLLOUT function gets called, the arrows hide. I've tried several flagging methods and have resulted in using a larger invisible border around the clip, rolling over that hides them.
View 1 RepliesWhen you open the Library panel and then my a new library so like you have 2 on the screen now pretty helpful if you want to open an external and have your current project open and drag and drop right. But here is the part I don't understand you have your 2 panels open now and every time you open your Library panel 2 pop up instead of one. God forbid if you every opened like 4 or 5 of these free floating Library panels I already have 3 going and there up there. is there a way to have all your open your Library panel with out having multiple un-needed Library opening along with the one you want?
View 1 Replies
