I want to make a MC scale when my crsor is over it and go back to normal when it's not.
onClipEvent (enterFrame) {
if (_xscale<100 ) {_xscale = _yscale += 10;
}
}
This is all the as i have but i do not know how to make it so the mouseover function is involved.
i got a logo, each letter it a clip, cos the logo is bit more than just text, but thats beside the point. I want each letter to start of larger than it should be and zoom out (scale down) to the normal size, pref with a bit of a bounce at the end, so it goes from very big to, slightly smaller then proper size, to proper size, get it? with help from Master64 (via IRC) i worked out that i could use _xscale and _yscale (i am relativly new here, lol ) but the problem i got is that it scales, but in huge jumps, not smooth.The class is ment to be reusable (duh!) so my concept is
Code:
start_width = 90
speed = 50[code].....
I'm working on my portfolio gallery. I need a custom cursor show up when mouseover to the next and back buttons. To better explain what I meant I uploaded my fla to the following [url]...
View 2 RepliesI have a movieclip that I want to be scaled to 400.After that I don�t want it to scale anymore.How can I stop it going back to it�s original value and scale again and again.I have the as in "On enter frame",I dont want a button to be pressed to start scaling.
View 6 Replieshow to make a graphic scale from 0 - 150% and then back to 100% using actionscript. I am learning actionscript and I would really like to start to learn how to get away from standard tweening and move into scripting it. There is an example of the movements I am looking to accomplish here :: This is part of the mctween examples - but this is accomplished with a rollover/out. I am just interested in getting this effect but just a straight animation when the playhead stops on the frame.
[URL]
Under the stroke properties before or after I draw a line, I set it to NORMAL but when I re-select the line, it keeps changing it back to NONE. Some how it is now the default and I cannot change it I have tried opening new documents from scratch but I still cannot get it back to scale normally. All the lines are inside movie clips and these movie clips need to scale properly. I cannot seem to find any other answers besides telling me what I have already tried.If I change the line type from solid to dotted, it then scales (actually you cannot change the scale mode.
View 1 RepliesIf I have a movie clip that has an onRollOver event, how do I turn the back into a pointing cursor from the gloved button cursor?
View 2 RepliesI made this Code to scale the movie when mouse is over and turn it to the normal size when mouse out, I got this error and i don't understand it (TypeError: Error #1034: Type Coercion failed: cannot convert "mc1" to flash.display.MovieClip. at Scaling_fla::MainTimeline/DoMe()TypeError: Error #1034: Type Coercion failed: cannot convert "mc1" to flash.display.MovieClip. at Scaling_fla::MainTimeline/reDoMe()
[Code]...
How can I scale up an entire animation when the mouse moves over it? Background: I'm no newbie on web development (I do PHP, javascript, CSS et al, and get paid handsomely for it) but I've never done Flash. However I am updating this site [URL] (the guy in charge is a friend) and you can see the Flash radar thingy in the corner. That came from the original site and is very old, links to the wrong pages and has the wrong text anyway. I have compensated for its wrong URLs with redirects but the owner asked if I could update it.
Well, I have a new version in CS4 Flash (having spent several hours seeing if I could modify the original it became clear that a re-write was more sensible), and everything is fine - but the only thing I can't work out is how to scale up the whole image (and scale it back down when the user moves off it). The original code was this, which doesn't scale down even though the code looks like the original author meant it to:
[Code]....
I need to play an flv back at normal speed,back at half of normal speed, forward at half of normal speed in AS3 through netconnection and netstream.
View 1 RepliesI'm having a problem making my FlvPlayback go full screen. In FF it works great but in IE (8) it will only work once! the next time, it will flicker and return to normal state.
View 1 RepliesI'm looking for a solution to scale (gradually scaling) the movieclip on mouseover and return to previous state on mouseout. Any movieclip prototypes available for that
View 2 Replies1) if I create items in a for loop, is correct to add a new eventListener for each item ? Or should I add only 1 eventListener to the parent ? and call the event through ID ? 2) if I want to scale my item, (a LinkButton with icon image), I noticed that the icon is sometimes resized with delay, so I have a bit of flickering when I trigger the event. Should I not use icons, and set the image in another way ? How can I fix this?
View 1 RepliesI've made a flash application using actionscript 3, I wanted this application size to be dynamic, To be able to embed it in any size and let it adjust itself accordingly. I managed to accomplish this, theres a problem though: The original width of the application is 700 pixels. I'm embedding the flash in a smaller size, (400 for example) going to full screen, and when I exit, the application sets itself back to being 700 pixels wide, and isn't adjusting itself to the 400px width of the actual embedding area..
[Code]..
I am working on a game that will have couple of XML files and couple of images external to the game.
i would like to protect those files so that they cant be changed/editted
is there a way to encrypt all files and then convert them back to normal on the fly as the game loads?
[Code]...
Ok ... so i think this is related to bitmap caching however the "this" is a dynamically created object that then dynamically has a .jpg placed inside of it. I want the object to disappear on rollOver and go back to normal onRollOut. But i can't figure out how to assign bitmap caching to the dynamic jpeg or this.movieClip as they are both dynamic.
How can i reset a frame so everything starts again instead of manually coding for everything to go back to normal positions because i have lots of objects and it makes it real hard.
View 1 RepliesI have a png image which has been converted to an MS and used as a button. When I mouse over the button, I _xscale and _yscale it so that it's smaller and on roll out the opposite needs to happen. However, when I move my mouse just over the edge of the button the xscale and yscale vibrate erratically and I am not sure what is causing this. I have already put a transparent vector rectangle behind the image thinking this will sort out the problem but it seem it still happens.
View 1 RepliesI am trying to make a grid of photo thumbnails where the thumbnail grows when you mouse over it. Sort of like the Mac Dock effect but in a grid. [URL]I don't need to load the photos as the above sample does. And I'd be happy with an effect in which the individual thumnbail grows on mouseover, or one more like the Dock effect in which the nearby thumbnails grow too, but less.
View 3 Replieshow I can keep my cursor an arrow when I mouseOver a button or mc, instead of it changing into a hand.
View 4 Repliesif i was to make a flash website is there a way that i could have it scale the width to fit the browser, and scale the height so that it keeps the same aspect ratio and doesn't stretch the contents out of proportion?
View 3 RepliesI want to make two custom cursors. One to be visible on rollover and second visible only on mouse down. Is this possible. I want to make game where cursor changes into mc1 and moves around with mouse but when you click mc1 is changing to mc2. Till now i managed to hide cursor, make mc1 to move with cursor but dont have any idea how to change mc1 with mc2 on mouse down and then mc1 to come back on release. Is there any other way to make this, my idea was to make 2 clips to follow cursors and use as to determine when each clip is visible, but it doesn't work.
View 4 RepliesI need to show different custom pointer when mouseover 2 different invisible buttons. These are next and back buttons which cover the entire left and right part of the stage. How this can be done in as3? Or is there a better way of doing it? I checked out the import flash.ui adobe live doc but can't quite make head and tail of it. I guess the example shown is only to change to custom cursor for entire stage.
View 4 RepliesI have a master movie with navigation that loads a external swfs. The external swfs serve different purposes and typically have a series of buttons that navigate the timeline. The external movies with their buttons work fine running individually. When the movies are loaded through the master movie, the buttons in the external movies looses the cursor change on rollOver. These are basic invisible hotspot - button symbols. The buttons typically navigated to different frames. I am curious why the cursor change fails when loaded through the main movie, but works when run on its own.
Throughout all the movies, I probably have over 200 buttons, I don't want to create rollOver and rollOut cursor changes for each. Again, these are basic button symbols.
I have a master movie with navigation that loads a external swfs. The external swfs serve different purposes and typically have a series of buttons that navigate the timeline. The external movies with their buttons work fine running individually. When the movies are loaded through the master movie, the buttons in the external movies looses the cursor change on rollOver. These are basic invisible hotspot - button symbols. The buttons typically navigated to different frames. I am curious why the cursor change fails when loaded through the main movie, but works when run on its own.I have done some searching in Google, but didn't find a similar issue.Throughout all the movies, I probably have over 200 buttons, I don't want to create rollOver and rollOut cursor changes for each. Again, these are basic button symbols.
View 2 RepliesI've created a piece that uses various custom cursors depending on what "tool" the user is using (like in the Flash or Photoshop UI). is there was a way to disable the scaling of these custom movieClips in case the user decides to view the piece in fullscreen? I would like the cursors to remain the same size as the system cursor, regardless of how big the asset is.
View 1 RepliesAS3 page with text links that change to a new color on mouse_over and change back on mouse_out. Sometimes the links do not change back and all remain colored after mouse-out. I have never been able to simulate the problem on my several computers at several locations but have seen it happen on the clients computers. Is there a known issue perhaps with Flash/AS3/Flash Player Version# that might cause this?
View 1 RepliesI searched and found the code below which works fine to change the color. What do I do to make the color go back to it's original color on mouseout?
pedals.buttonMode = true;
pedals.addEventListener(MouseEvent.ROLL_OVER, changeColor);
function changeColor(e:MouseEvent):void {
var color_transform:ColorTransform=pedals.transform.co lorTransform;
color_transform.color=0x004433;
pedals.transform.colorTransform=color_transform;
}
Is it possible to make a custom cursor with restraints (meaning you only see the cursor when you put your mouse in a certain spot, by defining both the max and min of the x & y), that is placed inside a movie clip; then make the movie clip move on the stage when you click certain buttons.
[Code]...
My site has a header and footer and then has an empty mc the full size of the stage (overlaps the footer and header). I'm loading 3 separate movable windows into this mc. I would like both the header and footer to scale proportionally with the browser (including the empty mc.), but not the windows. So basically I want everything to scale but the windows as they have pixel fonts.I'm not happy with my current website because its not scalable and when I drag the windows around I have huge margins on larger resolutions. Since my header and footers are vectors I realize I can make things alot more flexible if I can just figure this out.
View 3 Replies