ActionScript 2.0 :: Move Image When Mouse Is Over
Aug 10, 2005i have a panoramic image. and i want this image move to the cursors direction (left orr right) when mouse is over it.
View 5 Repliesi have a panoramic image. and i want this image move to the cursors direction (left orr right) when mouse is over it.
View 5 Replieswhen the mouse rolls over an image, text appears (in a small rectangle) and it moves with the mouse, only while it is still over the image.
Or at least, does anyone know what this is called or how to do it?
Here is what I've done so far: [URL] Basically my goal is to have this bottom image move horizontally according to the mouse. However it would be nice to have this image move slower and only go out of the stage by about 50px both ways (left and right). Here is the code I've used:
[Code]...
I've been working for awhile and I finally have the Mouse Pan to work. Now I can't seem to insert it into my project. It works fine if the object I am panning is on Frame 1. However if I move it to the correct frame (5) it throws the coding off. Does anyone perhaps know what I'm doing wrong. I have a playhead that moves down the timeline, when it stops on frame 5, that's when I want the image to be available and pann-able. [code]
View 1 RepliesI have 2 buttons that i made an up arrow and a down arrow. I would like them to move an image up or down on mouse click. Although i made the button rollover actions previously and i got the script below from researching online. Now I am not sure if i should even bother with it. I thought if i could get the actionscript to recognize the buttons and tell it what to move the (the ad) I could get them to work. But haven't figured out how to do that and if i have to make custom buttons for this. see what i have below thus far.
[Code]...
This probably will be very easy for some, but I am stuck on this. I have a map in a movieclip(mc_map) on stage and a small square which acts as a mask to the really bigger size of the same map. What I am want to do is that when I move the mouse on the mc_map(eg: say my cursor is on New York), the small sqaure window will unhide the same area, or will move that bigger image such that the same area is shown under the square mask. I also want to add another cursor(or crosshair) to the stage which is live only in the area of the square and replicates the position of mouse on map.
View 1 RepliesFor a project I am am working on I need a pan effect like the one in URL...Now I was just wondering how to do this. There are various ways I can think off to make the background move according to mouse movement, but nothing I have done comes close to the smoothness in URL...More specifically, I can trigger an event when mouse in moved left/right/up/down in the pressed down stage - this event can tween the background in any direction required. But how do I stop the tween movement when the mouse is released. Since I have asked the background to tween from one its central value to say its rightmost/leftmost value, how do I make it stop in the middle of the tween when the mouse is released.
View 3 RepliesHow is an effect like this created? The effect is after you click "enter site", you see the background moves a bit when the viewer moves the mouse.[URL]
View 2 RepliesDoes anyone know the algorithm used in this image panner [URL]
How to move the image in the opposite direction of mouse.
I want to create a simple static image on a 392 x 72 document. When you move your mouse over the image, it changes to a black screen with a cursor following mask in the shape of binoculars which reveals an image below (not the same image as static one).There is going to be a clickable monster which takes you to the next scene and from there,the next scene.I have attached a storyboarded idea of my banner.I have the images, I am just struggling with the ActionScript code.Click on the image to see comments on right hand side.
View 1 RepliesAny link or flash file which explain how to apply mouse move effect on images of gallery. I mean image sof gallery simply move with mouse direction and stop on mouse stop.
View 1 RepliesI have an image gallery which loads up an image full screen. Some of the image spills over the screen size and I would like the image to move based on the mouse position with easing, like in the following link:URL...
View 0 Repliesi'm making a small "add news" movie for a site in actionscript. When I insert an image in my textField, I can only move the cursor with my keys and not with my mouse anymore. I put the image always in front. I also have to click one time in my textfield, otherwise my text appears under my image. When I click it aligns to the right.
[Code]...
how to do an object move towards the mouse when i move the mouse the towards the object and backwards when i move the move away, something liike the menu on [URL]
View 2 RepliesIt has been awhile since I have worked in flash.Right now I am working on something where I would like a panel to disappear when someone mouses off the stage.stage.addEventListener(Event.MOUSE_LEAVE, leaveHandler); It usually works fine but if I move my mouse really fast it doesn't fire. I have also tried the same thing using a custom invisible button that surounds the perimeter of the stage and I have tried ROLL_OVER and MOUSE_OVERand again, if I do it too fast my event doesn't fire (I am using trace)I can't find anything on the net about this - is this typical of flash that if you move your mouse too fast you break it? Do I need to increase my frame rate (I would really rather not because I have perfectly timed animations - I am at 30 frames per second)
View 1 RepliesAs of Flash 10.2, Flash supports hardware accelerated mouse cursors:[URL]..Unfortunately, the mouse cursor doesn't update until AFTER the mouse moves. You can see this behavior on the web page above. If you click "Set to custom cursor" in the sample app at the bottom of the article, you'll see that the cursor doesn't change until you move the mouse.
Anyone have a trick for updating the mouse cursor immediately, before the user moves the mouse? I tried doing Mouse.hide(); Mouse.show(); but that doesn't work.
I am creating mouse scroller and when I insert actionscript my images wont move depending on the mouse movements..I am using Flash cs5 and Actionscript 2.0...this is my actionscript:
[Code]...
I am trying to have two guestures on a SpriteVisualElement which I thought should be pretty simple implemented: Mouse_Move for sweep Gestures and mouse click to enable.. So I have 2 Eventlisteners on my stage:
[Code]...
The main problem is that every type of sweeping on the screen also fires the taphandler().. how to identify the correct event? I tried to to my taphandler only if(!event.buttondown) but no success.
I started another thread where i had gotten help and combined the snow tutorial and the programatic mask tutorial to create particles that reveal an in-focus image over a blurred one. I just need help making the particles swarm around the mouse when it is present and have the particles just float around when not. Presently the random motion is just fine and looks like this (i just inverted the this._x and this._y so that they would go with the mouse direction not away from):
[Code]...
I'm wondering how is this task done that listen to mouse move event when user cursor is out of stage?
View 6 Repliesi am using this on Mc
onClipEvent(enterFrame){
diffx = _root._xmouse - this._x ;
diffy = _root._ymouse - this._y ;
[code]....
How can you restrict the mouse so that users cannot move their mouse into a certain area, (or a certain y or x value)? This is useful to me because I need it for a game.
View 2 Replieswas wondering if anyone could assist me with some actionscript. I am working on a project similar to this (thehideout.org.uk/refuge/) and making the background image move around as if it the scene is a POV.
View 1 RepliesI would like to make a flash movie with a picture, where when the user holds down the mouse button, part of another picture will emerge in that general area (like a magnifying glass looking into another dimension).
Technically, my idea was to make a flash file with two images, and then code the mouse to be able to make the top picture transparent in a circle-like area around the cursor, while the mouse button is down.
But how to do that? I am using Flash CS4, but I don't really care if the solution is in AS2, or AS3, as long as it works
I have a panning background with buttons in it. It would be nice if when the button is pressed i could move the position of the mouse so that the movie pans and catches up with the new position. Is this possible?
View 4 RepliesCan You with a code move the point where the mouse is placed?
Example. If you have a row of buttons on a frame and when you click one of the buttons you don want the mouse to be on that very same spot because on the next frame are the buttons on the same place. You want the mousearrow to be placed on the top of the frame.
I make my flash-site, & i want to make that, when the mouse don't move (for example for 10 seconds) then start an Mc.
A know, that i have to add a stageEventListener with Mousemove, and i know how to start an Mc, ... but the others...
I tried to translate this old code into actionscript 3, but unfortunately the new code doesn't work anymore.The mouse events of the old code are general, not linked to a movieclip (which I did in the new code with the addEventListeners). How can you do this with as3? Something like Stage.addEventListener? (but then I got an error feedback from flash, so it must be done differently).I also don't know how to translate the onMouseUp part. Maybe with a removeListener?
old code:
Actionscript Code:
import com.flashcreations.utils.MathExtra;onMouseDown = function() { // define this
[code].....
I'm trying to create a script that locates the objects location, and moves it smoothly out of location (but not out of stage) when the mouse is close. When the mouse moves away, the object should return to its place. I've really been searching for hours, and I cannot seem to find anything that works.
View 2 RepliesI've seen couple of websites [URL]...in these websites the text & the objects move with the mouse moves. I just wanna know how to move the objects with mouse movement or you can say how to make an object follow the mouse (left-right-up-down)
P.S. In the 2nd website there's a 3d character also which I don't have in my project so there's nothing to worry about 3d in flash. I've just couple of images & text