I have a button that I want to have load a movie when pressed. It works, howerver, the movie loads in a separate window instead of the the main timeline where I would like it to. How can I correct this? Here's how I have it scripted now:
[Code]...
I want to load six seperate .swf's into the main movie while the main movie loads too. So in simpler words, i want to be able to load all of the swf's the same time i am loading the main swf.
View 2 RepliesUsually for my preloaders I have a separate swf that loads my main swf. Can anyone see any reasons this would be bad?
View 1 Replies[URL]
I made a site, but the menu isn't loading properly. If you reload the page the menu loads, but not sure why not loading every time.
Right now menu and site sections in main SWF file. Maybe I put the menu into a separate SWF file it would load properly?
If the site sections are in the main SWF timeline, then how do I do the actionscript for the menu buttons?
Ie)
menu in level7
main site in level0
site sections are "product section", "about us section", "glossary section" on main timeline
So I'm not loading any SWFs, just moving between sections on main timeline.
Hiding Button on Main Timeline from inside separate Movieclip
View 1 RepliesI'm an ActionScript noob so I'll try as best I can to explain what I need to do. I have a project where I need to have a floating window that controls a main timeline. The idea is to have a floating window that can be seen only by the operator. This window would control the main timeline or content on a separate screen viewable to the audience. So I'll be using a dual monitor setup. The controller window would have about 40 buttons on it that would turn items on or off on the main timeline. This seems like a relatively simple thing to do but being the noob that I am I'm not sure how to go about it. I essentially need one flash file, the controller, to talk to the other one, the content.
View 3 RepliesI have a html page that has a link, which links to another html page with a flash file on. What i need is when this flash page is accessed i need a new movie to load, which would usually load from the navigation when someone clicks on a button.Is there anyway to link to a page which then loads a new movie into the main movie. can this be done???
View 10 Replieswhy the timeline inside these movie clips and the timeline on the main scene have to correspond to work. [URL]
View 1 RepliesI cannot seem to find anything of what I need from google.(Well, I can find the reverse method to what i need ) Basically I wish to access a variable declared in the Root Timeline from my Movie clips timeline.
[Code]...
how to load images so they pop up in a seperate window to the flash movie, to see what mean check out this site and click one of the images [URL]
View 4 Repliesi am creating a website for a band, with an mp3 player. i want to be able to make an mp3 player that pops up in a separate browser window. the mp3 player would have a "playlist" that can be dynamically changed from the main window, which gives a list of albums & tracks to choose from. the model for this is Rhapsody's web interface. so, how would i go about creating & dynamically changing the playlist (while music is playing) across multiple browser windows? the "playlist" would be an array of references to mp3s, i guess-- so is there a way to pass events & variables across the windows?
View 4 RepliesI have a file comprised of 1 scene and two movie clips. The clips are instanced into the Main Timeline and occupy Frames 1 and 2 respectively.MovieClip1 is an animation that has navigation buttons that appear at the end of the clip. I'm trying to get mouse click navigation to make Frame 2 on the Main Timeline active.
Here is what I'm trying but it is not working:
btExplore.addEventListener(MouseEvent.CLICK, ExploreClick);
function ExploreClick (evt:MouseEvent):void {
gotoAndStop(2);
}
this takes the animation to Frame 2 of the Movie Clip Timeline not Frame 2 the Main Timeline.
on (release) {
_parent._parent.buttonClick("movie name", _parent._name);
}
For the above script, am trying to load a swf file to load into an main movie file. This is for a flash website am working on, and i wanted to know if the above .Since having all the pages (6 pages) in one flash file, it would take long time to load, so am planning to have each of the 6 pages in an separate swf file and load these into main swf file, on click of a button, Also there needs to be a loading bar for each page.
I am making a Flash portfolio for a college class. I am trying to make it when I click on a button, it will load an external .swf. When I click on another button, it will replace the previous .swf.I have it working, but the code is sloppy, .Also, within cleaning up the code, is there a better way to load the first external .swf when the main movie loads?
Code:
// FULL MENU ACTIONSCRIPT //
import flash.events.MouseEvent;
import flash.display.*;[code].........
I am diving in to learn AS3 and converting my site over to AS3. The majority of my code is for my navigation in my main movie that loads external swf files. Here is what I have and I don't know where to start to convert it. I know I need to do this in steps. So the audio is not important now or my other swf files.
[Code]...
i think i may have a challenge for you. I would like to have a flash movie load to a random keyframe in a timeline when the page loads. Basically, i'd like to set up a timeline with say 10 movies. When the page loads, i'd like the flash to randomly select from some predetermined keyframes (obviously where each movie starts) and when that movie ends, jump to another section of the timeline. This way, the loading of the movies is somewhat seamless and it looks like i've made 10 different flash movies.
Even if it's not possible to all load from the same timeline, i'd like to have it play the first movie, then when it reaches an ending frame, it loads another random movie from a directory on the server, and then keeps going and going until it can't stand it anymore.
Is it possible to target a loaded movie within the main timeline and stop sounds in that particular movie only?
View 4 RepliesI have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 RepliesI have a movie which contains a mc on the main timeline. that mc has a function in it that says
[Code]....
I am simply trying to tell my main timeline to go to the next frame when a movie clip reaches the end of its timeline (using AS3). Here is what I have which does not work.
Code:
MovieClip(root).gotoAndPlay(nextFrame);
I'm making a movie w/ no interactivity and I want to put a series of movie clips on the main time line, each to play after the previous movie clip is done. The only way I can make it work is to put the movie clips in keyframes and then allow all all the frames for the movie to play. My movie is way too long and I know there has to be a better way! I'm trying to figure out the action to assign to the keyframe that will play the movie clip within that one frame and when it's done, go on to the next movie clip.
View 1 RepliesI have a main timeline with a blank movie in it so that I can click the menu and various swf's load into it. This all works perfectly. Then, I have a contacts page with a form that sends to php which all works perfectly. The thing that doesn't work is that when I click submit the thank you frame immediately afterwards doesn't play. The code I've typed is: On the Submit Button:
on (release) {
form.loadVariables("email.php", "POST");
}
On the movie clip:
onClipEvent(data){
_root.nextFrame();
}
This all works fine in Publish preview but once uploaded to the servers it fails unless you type [url]....then it works fine. Is this something to do with layers and levels etc?
I've got mc and at the and I would like to go to the main timeline and do something else. How would I could do it?
View 1 RepliesI have a move clip with several buttons inside; their rollover seems fine.i am trying to get the buttons in the clip to address/go to the main movie timeline. Button names within the clip: c_btn, d_btn, etc. These are the symbols names; they have not been given unique instance names within the clip. The clip name is nav_all and its instance on the timeline is navall.mc.
View 6 RepliesI've created a movie clip symbol with it's own animation on its timeline. I've placed this symbol onto the first frame of the main timeline but when I test it, it doesn't play. There's no stop actions or anything on either timelines so I'm not sure why this is happening. I thought that the animation in a movie clip symbol will automatically play (i.e. if you test in a browser) once it's on the main timeline - is this right? Or am I doing something wrong. Maybe I need to tell it to play?
View 6 RepliesI've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 RepliesHow would one on a specific frame inside a movie clip cause the main timeline to go to a certain frame label?
I know how to use gotoandstop(), but i can't seem to find a working, correct syntax variable that accesses the main timeline and not the movie clip's timeline.
I'm in the process of designing this site as a portfolio for my art and am in the process of creating and laying out the galleries. My idea was to create movie clip animated buttons that would react to the roll over stuff. I got that part to work the way I wanted it. But now, I can't seem to figure out how to put a "Gotoandplay" type of code on the buttons so that the timeline would jump to the appropriate frame and play. (I put an "on(release) gotoandplay" on it the way I would put it on a button but it never responds. I have a couple of buttons that work fine with a "geturl". so I thought a "gotoandplay" would work fine. If this can be figured out in a way that I can easily use it for all buttons with just the frame number needing alteration, that would be best. After you click the splashpage door jpg, there will be a piece of paper on the floor. That is a button which should trigger the animation that starts at frame 114. When clicked, the page lifts up and spread open to two pages. But it never reacts
[URL]
Is it possible to have an instance of a movie clip symbol which has its own timeline "play" when you scrub the main timeline?You can do this with graphic symbols, but so far I've had no luck doing this with movie clips.See, I have a movie clip -- several actually -- with their own timelines which I want to place in the main timeline.When I scrub the main timeline I'd like to see them scrub as well, instead of simply seeing the first frame of the movie clip.I basically have to work blind like this.
What I'm trying to do is basically have several "slides" which are animated and then have a stop();. They'll sit there for a second and then the entire animation, or slide (movie clip) will move off the stage. I can't do this now. When I scrub the main timeline I can't tell what's happening in the movie clip. I can't tell when I can slide it off the stage.I tried to get around this by using graphic symbols with their own timeline, but adding a stop(); doesn't work in them.