so i know how to make a movieclip play from a button but how do you do it just by inserting an action at a keyframe? i have a keyframe at frame 5 with the action
squaresRedMovieclip.gotoAndPlay(2);
but it doesn't work. I want the movieclip 'squaresRedMovieclip' to start playing at frame 2. but it doesn't work. am i meant to add some extra code that i'm not aware of?
Can a button play a movieclip if it lives within another movieclip? Let me explain: Buttons in a map key ran route animations on the map. Code for button (accessed by selecting button and F9) ..reads : on (release) { gotoAndPlay("BusRoute_375");}
[Code]...
All layers and consequently all route movieClips that relate to the map as well as the stop codes for the individual route animations now reside within that MovieClip which sits on a new layer above the map key layer. However, the key buttons no longer run the route animations. What should be done so that when clicked they still play the route MovieClips. Its like the button code cant see the layers it once refered to, now that they are in a movieclip.
I have a movieclip called 'mcBox'. and I have a button called 'playBtn'all that I want to happen is when you click the button the movieClip plays, so simple, but really finding it hard to get to work. This is what I have
playBtn.addEventListener(MouseEvent.CLICK, onPlayClick);
function onPlayClick(event:MouseEvent):void
{
mcBox.play();
}
I know it's the 'mcBox.play();; part but can;t figure what it is?
I have a simple actionscript 3 problem I cant solve. Basically I have a movieclip, with inside it an imported FLV on the timeline. I placed the Movieclip on the stage with an instance name "animation" and next to it a button with an instance name of "btn_1", that will activate the movieclip to start playing when you hover over it. I figured that it should be something like this.
Code: Select all
btn_1.addEventListener (MouseEvent.ROLL_OVER , btn_1_ROLLOVER);
function btn_1_ROLLOVER (e:MouseEvent):void
{
play the movieclip here
}
I tried a load of different codes trying to get this work, but I can't get it done. Can anyone help me out with this?
I have a button that I would like to play a slideshow movie clip. The movieclip instance is "samples". And there are "stops" in each of five frames.
I only want the next frame to play when the "nextSlide" button is pushed. And at the end of the slideshow, loop back to the first of those five frames.
how to play a movieclip on button click in actionscript 2.0.
View 3 RepliesI have an MC which plays when movie is loaded. I have a button which I want to use to stop the MC playback. Then when it has stopped, have the same button to make it play.
Well my code went like this:
if (roller.stop = true) {
btn.onRelease = function (){
roller.play();
}} if (roller.play = true){
btn.onRelease = function () {
roller.stop();
}}
I need to add code to my game. All the levels of the game are in separate frames of a movieclip called 'game'. I need a pause and play button to stop everything going on and then a play button to start it again.
View 0 RepliesI have a play button (instance name - play1)
When I click it I want it to play a short movie clip (called - introExpandMC) then for it to move on to frame 2 of my my main time line.[code]...
i already create one main movieiclip(index_mc),including menu button to link multiple movieclip, which is containt: aboutus_mc, story_mc and gallery_mc. all button in index_mc run perfectly.
In gallery_mc i've made thumbnail mc (btnthumb1_mc, btnthumb2_mc,btnthumb3) which inside already has button(btn1,btn2,btn3) to show large images in movieclip (largeimages_mc) which is large images contain several jpeg
the problem thumbnail as button cant link to show largeimages_mc, and i already put as2 in button, which is:
Code:
index_mc.gallery_mc.btnthumb1_mc.btn1. onRelease = function() {
largeimages_mc.gotoAndStop(6);
};
I am trying to play a nested movieclip by clicking on a button. I have an instance name for the nested moviclip, and this is the code I atatched to the button:
on (release) {
_root.conference.gotoAndStop(35);
}
Nothing happens when I click the button with that code. However, if I take out the instance name, the button will play the frame specified:
on (release) {
_root.gotoAndStop(220);
}
I have a college project to hand in within 2 days. I'm making a website and what I want to achieve is a button that plays the movieclip (which is a piece of paper going onto the stage) and when you click it again it reverses that clip. I've tried loads of things and only got code that allows two buttons to reverse and go forward.
View 2 RepliesI have a movieclip within the main clip called "playPause" which starts with the Pause button shown. When clicked the movie clip moves to show the play button and pauses the current parent movie with the AS "_parent.stop();" when the play button is then pressed the movie plays via "_parent.play();" and reverts back to showing the pause button.
Simple so far. What is getting me is if I add a movie clip within the parent (say some scrolling object) I cannot get the added clip to pause. For example say the "parent" movie clip the playPause moveclip is within is called "intro" and the moving object is called "introObject" which is embedded in a frame along with "playPause"
What I have setup for the playPause buttons is for pausing
_root.introObject.stop();
and playing
_root.introObject.play();
I am trying to load a movieclip and have it be controlled by a play and a pause button. The load works good and the code for the play/pause works.
I need the "test2" file to load the "ball_mc" file and then I should be able to play and pause the ball as it runs across the screen. I think I need it to be a swf file also, but Flashkit won't let me upload that type of file.
I'm looking to have a movie clip pop up, play itself after a user clicks on a flash navigation button.
(something like this???)
message_btn.addEventListener(MouseEvent.CLICK, goMessage1);
function goMessage1(evt:MouseEvent):void{ ???(play message movie clip here)???;}
Is there an easy way to switch out a movieClip for another dynamically loaded movieClip?
I have and eventListener onCLICK that when selected it starts an FLVPlayback but I would also like to swap out with another movieClip Play Now / Now Playing button.
Just some background. I am looping and loading a play button jpg's into one movie clip and assigning an incremental number as a name to the play button movie clip. On Click that play button plays a movie but now I would also like to switch the play button graphic to a playing now graphic.
//ADD EVENT LISTENER TO ALL MY THUMBS_BUTTON
thumbs_button.addEventListener (MouseEvent.CLICK, playVideoThumb);
for (var i:Number = 0; i < my_total; i++) {
[Code].....
So, in my base flash file I have movieclips playing inside of a container.
They are cued from external .swf files.
When one is pushed another checks to see if that movie is at its "midframe" and then plays the remainder of that movie before playing the movie that was pushed.
ALL OF THIS, works fine. The problems is that I have a button inside of these movieclips that I need to play the remainder of the movie to then return to the main menu.
This is the code on the buttons which cycle through the movieclips:
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "illustration";
container.loadMovie(illustration);
[Code].....
If I wanted the movie to only return to to the main menu I could use this code, but it's flawed for two reasons:
on(release){
_root.gotoAndPlay(1);
}
a. This doesn't play the rest of the movie before returning to the main menu.
b. Once it returns you to the main menu, none of the other movies will play again.
I've got a button that tells a movie clip to play its animation (goto and play frame 2), but I only want it to play that frame if the current frame is frame 1 - meaning that I don't want people to be able to keep clicking the button while the clip is playing and have the clip restart.
I'm guessing it would be something like:
If ( current frame is frame 1 ) { goto and play frame 2 }
But I can't seem to get it to work.
I have a movieclip within the "over" section of my button, which contains both an roll over and a roll out animation. My problem is that I cant seem to get flash to play the rollOut animation.
I placed the following code in the button itself
on (rollOut) { this.start_mc.gotoAndPlay("mouseOut");}
I tried setting up a function to find when the user rolls off the button but it didn't work either.
What I want to do is have one movieclip that has many frames and turn that into a button and then make different instances of the button and have those instances display a certain frame of the underlying movieclip.
View 17 RepliesI have a movieclip playing and when I click a certain button I want the movieclip to first play an "outro" animation (which is also inside the movieclip) then go to the real target of the button. For example, I am at the Homepage of my website then I click on the Contact button. The homepage will first go to Homepage's outro animation then go to the Contact page. I need the button to recognize the page/clip being played and the page it will go to.
View 6 RepliesWhat im trying to do is play a movie clip between frames. So say we have two menus, when you are on menu 1 and you click the button for menu 2, a short movie clip plays and then you stop on menu 2. I realise I can do this by putting the movie clip on the main scene timeline, but is there anyway i can put it on the button? I think the action script would be something along the lines of "On release play MovieClip and goto frame X" As i said i want the movie to play as an almost filmic transition between menus, with a fade up and then out (Have got that bit sussed using the alpha controls)
View 3 RepliesI have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10.
View 7 RepliesI'm building a photogallery base on this tutorial http:[url]....I'm trying to add a play button, so the gallery would play the pictures onRelease of the button at interval of 3s.It's not working. my code is:
playBTN.onPress = function() {
this._alpha = 50;
setInterval(this, "nextImage", 3000, 1);[code]....
How do I make a button rotate or a movieclip play onRollOver without stopping or changing background movie
View 1 RepliesI Have a flashmovie thats almost done and will soon hit the internet, but I want to add some animations into the website it�s two gears that I�m about to put at the bottom of the page and when a button releases in the main flashmovie the two bottom gears will turn a few frames and just stand still.These three movies are all separate (main movie, first gear and second gear).
It's a homepage designed in HTML and flash that has this "main flashmovie" in the middle of the screen, the size is about 1500(width)X800(height). And the gears is about 800wX200h placed at the left and right side bottom of the page. Dont worry the site is easy to apply to any screen resolution.I have been looking everywhere for any soul out there who suffering from the same problem but no success. Is it possible to script a button in the main movie to launch two separate movies in their own contents?
I have a movieclip playing and when I click a certain button I want the movieclip to first play an "outro" animation (which is also inside the movieclip) then go to the real target of the button. For example, I am at the Homepage of my website then I click on the Contact button. The homepage will first go to Homepage's outro animation then go to the Contact page. I need the button to recognize the page/clip being played and the page it will go to.
View 1 RepliesI am building a flash interface and I would like a menu where it is hidden to begin with (just a tab). You click the tab to expand it, and click again to collapse it. I've made a movieclip with animation of the menu opening up and closing, but I can't seem to work out how I'd go about making the movieclip open and close properly.
View 4 RepliesI am trying to make a swf with one FLV playback player and 6 buttons. I've got 6 different videofiles that I want to have linked to this swf. Some of the videos are quit large.When starting the Swf, the first video has to start, after playing it, it has to stop. Then you must be able to choose which video to play by clicking one of the buttons. I don't want to have small thumbnails of the video, just plain and simple buttons.I have to have all my files, both fla, swf and xml files in the same directory (I cannot have them stored in different folders, since I have to upload this to a cms system which has limited upload properties).
I've tried to find the right script on the internet, I'm not very good at scripting myselve, actually rather poor educated there.It seems to me that I have to make an xml file with a list of all my videos, I have my default swf ready, with a FLVplayback and buttons.Now there's just the coding part....
I have created two buttons for separate audio files. Essentially if you click on the button it will play and stop. This works great! I have also injected a SoundMixer.stopAll(); to ensure if you click between both buttons that it will stop the current audio file to play the next one. My problem is when I select the 2nd button for the first time everything seems to be working...it's when I attempt to click on the first button again, that it will require 2 clicks and then it stops and plays accordingly...anyone know how I could eliminate this annoying two click process?
[Code]...