I'm going to create simply menu in AS2 and everyting is ok except this onRollOut.
"on", "off", "start" = are labels
My code in first frame:
Code:
stop();
this.onRollOver = function() {
[Code].....
and problem is that when I quick take off mouse from button the efect is not disapear.
I got this expendable Bigbox I made for my client. All works well. The only problem I have is that, where there is a quick mouse (not event THAT quick) rollout, the action (closes the expended portion) doesn't work.It get's stuck and doesn't gotoAndStop(1).
[Code]...
have one mc called mc1, and when the mouse cursor is over it, mc2 is sent to a certain frame and the _alpha set to 0. The problem I have is that when the user continued with the onPress (pressing the left mouse button) after the cursor goes outside of that mc1, mc2 does not become invisible and what I need is to do that, when the user goes out with the cursor of the mc1, the mc2 becomes invisible even if the left button of the mouse is pressed. And now don't detect the onRollOut if the button of the mouse is pressed.
View 1 RepliesThe main FLA has buttons linked to external swf files that are nested in a layer inside an html file. When rollover occurs, it opens up corresponding swf file. Problem is that when a user moves mouse too quickly over the stage, the rollout gets stuck in the last button the mouse posssibly passed by.
View 4 RepliesI have am wanting to do a quick calculation based on the mouse position.here is what I am trying to do.I have an item the site on the stage
stage.width = 400;
object.width = 900;
object.x needs to be at its most -900 and at its least -225.
and based on the mouse position on the stage object will scroll within these bounds.I have all the functional done but just need to know the basic equation to find these points.
I am replacing the mouse pointer with a custom graphic in an .swf that takes up part of a web page (.swf stage is about 350px wide, total layout is about 1000px). My code is all working fine, except that, if you move the mouse fairly quickly -- as you might do to get from a point on the .swf to the opposite side of a large monitor -- the .swf loses track of the mouse, and thinks that the ._xmouse/._ymouse values are still the same as the last point that that Flash saw the mouse, which is usually somewhere in the middle of the stage, thus "orphaning" the custom cursor. If I have a setInterval or something tracing the mouse position, the .swf still thinks that the mouse is sitting on top of it, even though the cursor is actually far away somewhere else. hitTest also still returns true as though the mouse was there (as you might expect, given that it's based on _xmouse/_ymouse).
The workaround/hack I have going now is that, once the pointer switches over to the custom cursor, it starts a setInterval, and then if the mouse appears not to move for a few seconds, it reverts back to the default cursor (i.e., Mouse.show). Obviously, this is not optimal, because that means that the custom cursor disappears if you don't move the mouse for a second or two, and it doesn't really solve the problem anyway because it still looks like the custom cursor gets stuck for a second when you move too fast.
[Code]...
I wrote a simple class to tranform the color of the btn clicked to a random color everytime its clicked but my lack of understanding of AS3 is giving me deadends, I'm not sure how to set it up and my current set up its giving me the following error:
ReferenceError: Error #1069: Property event not found on flash.geom.Transform and there is no default value.
at colorChanger$iinit() at mainBeta2_fla::MainTimeline/setName()
So this is my colour transform class:
package { import flash.display.MovieClip; import flash.events.*;
import flash.geom.*;
public class colorChanger extends Sprite {
// Not sure if I should put e:MouseEvent or a pass a variable to the function
public function colorChanger(colorPass) {
[Code] .....
I need the button to change to a random color everytime its clicked and I'm using a custom class because I have over a dozen buttons in one time line...
I have an issue that has been plagueing me all morning. I've searched and searched on google, here, other flash sites, and even though I've seen a couple people with related problems, no solutions have seemed to tailor to my project.I am working with a series of invisible buttons that perform actions on a movie clip and a text field to simulate the rollover. However, I'm finding there is a problem with the rollout. When you move your mouse over the buttons quickly, they often seem to ignore the rollout command and stay on the rollover state.
Warning to anyone downloading the zip is that I'm utilizing mc_tween. However, I created this same scenario a couple weeks ago (lost my work from a faulty drive, and I'm redoing it now), and I had no issues. Obviously, my code ended up slightly different in the rebuilding of this thing, but this side effect is really holding me back.
I have an image that will double as a button to make it larger if you click it. on the rollovers I have a plus and minus sign depending on which size the image is currently.if you click the image and it gets larger the cursor will probably still be on the image. Therefore the minus_mc won't play until you move your cursor off then back on the image. How can I have the rollover refresh without having the cursor move off of the image?
View 1 Repliesi wrote this code:
[Code]...
} // end btn4Loaded. and it works, once clicked, it does what it has to do. Ofcourse, me trying to break it, i found that if i click the buttons fast, it will re-import the external swfs causing me to have multiple instances of the external swf. so in short, if i click like normal(slow ) ie like a person that clicked to view a section etc, then its fine, if i click fast or repeated clicking ie like a person that double clicks etc, then the problem occurs.
I built a slideshow system a while back and have revisited the code. At the time I was getting an error so I just wrapped the function that was failing in a try and using brute force made it run the same function again and all worked but isn't very elegant. I click the next slide button in quick succession I get a #1009 error. Its as though the afterslideload function is firing even though there is properly loaded yet.This is actually a plug-in that hooks onto the back of the JW player. It picks up its xml from the players main playlist. So every item on the playlist has its on slideshow xml that contains all the info that the plugin uses to work. Every time the 'itemhandler' (clicking on an item on the playlist) is fired the xml is given to the plugin.The error is:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at com.mark::slideShowMP3/fadeSlideIn()
at com.mark::slideShowMP3/afterslideload()
[code].....
On most of my option MC's I have something like:
this.onRollOver = function(){
this.gotoAndPlay("onanim")
}
this.onRollOut = function(){
this.gotoAndPlay("offanim")
}
Obviousy if you quickly roll on and then off the MC the animation is staggergy and not a fluid animation.I would like to set it so that everytime you touch/roll on the option MC it will always play its full on animation right, then it will go to the off animation.
im trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 RepliesI have a very simple piece of code but it has one very annoying bug. When I press the button a second time, the code doesn't work. The only way to get the code to work is by moving the mouse a tiny bit, or moving the mouse off the button and back on. make a button that can be clicked many times without moving the mouse?
Code:
randommultiquiz.onPress = randommultiquizOnPress;
function randommultiquizOnPress() {
_root.attachMovie("connect", "newconnect", 200);
newconnect._x = 0;
[code]....
I changed the mouse cursor using a tutoral from this forum, but when I press the right mouse button,the standard mouse cursor reapears.How to prevent that?
View 10 RepliesI would like to make a flash movie with a picture, where when the user holds down the mouse button, part of another picture will emerge in that general area (like a magnifying glass looking into another dimension).
Technically, my idea was to make a flash file with two images, and then code the mouse to be able to make the top picture transparent in a circle-like area around the cursor, while the mouse button is down.
But how to do that? I am using Flash CS4, but I don't really care if the solution is in AS2, or AS3, as long as it works
I need to perform an event when the mouse moves AND when the mouse button is down, how can I do that? What will happen is that when I click and drag the mouse, the width of an object will change. Here is what I have so far:
[Code]...
This is quite a complicated problem to explain.Basically I had some buttons with a on mouse out, and on mouse over effects.I wanted each button to load a different scene of the movie.For some reason the on mouse over and mouse out button effects work until I link them to load a scene in the movie.The only button I have linked to load a movie is the Drinks button. It loads the drinks scene, no problem, however the mouse over effects don't seem to work anymore.I have included the .fla file so if someone could maybe have a quick look at it, it is probably just a small bit of coding I have done wrong!
View 2 RepliesI changed the mouse cursor using a tutoral from this forum, but when I press the right mouse button, the standard mouse cursor reapears...
How to prevent that?
made a custom mouse cursor but the cliente wants that little hand when the mouse is over a button and/or links.
View 1 RepliesIf I roll over the button tweens from alpha 50 - alpha 100%.If I rollout it goes back to 50% via a tween.If I click and hold and or I click very fast and move the mouse away from the button the rollout fails.It keeps the picture at 100%.Is there a way to stop this from happening.Basically with the mouse button held down and moving the mouse off the button prevents the rollout from working properly.
View 3 RepliesI've got mc which onRollOver goes up and onRollOut it goes down.The problem is when I test the movie and move over the movieclip it works fine, but when I am doing it fast over it, it goes up and doesn't go down even I rollOut.
View 4 RepliesI have a small big (well I hope it's small, that I can't see where I am goign wrong).
I have a check box and when the user selects that and then clicks a ok button then it should load some new XML into a textfield. The problem is it doesn't seem to want to get past the actual function. I know with the trace statement that it knows it's selected and the OK button has been clicked but it just won't go to the loadXML function. Can anyone see something I'm not?
[Code]...
I have a movie which is serving as a button. When you rollover the image, it grows, and stops. When you rollOut, it shrinks, and stops. This code works fine.The Problem: When you scroll the mouse over quickly, the animation get stuck and doesn't execute the rollOut code.Here's my code:
Actionscript Code:
thumb_test_4.onRollOver=function this.gotoAndPlay(2);}thumb_test_4.onRollOut=function () { this.gotoAndPlay(6);}
[code]......
I have a button that I basically want to give the action:
on (press) {
gotoAndPlay (3) ;
}
[code]....
This may be simple. All i want to do is prevent the onRollOver event from firing while the tween for the onRollOut event is playing.
View 1 RepliesOk, the WD who designed my site put a flash header at the top w/ my testimonials. Now I have another WD fixing stuff on my DW template & there seems to be a problem for me in Fire Fox. Whenever I go onto certain pages, the flash catches & doesn't load smoothly with the rest of the page or some times not at all. See page... [URL] (or any page in that test folder)
I'm about to launch the site & he says there is nothing wrong, but this didn't happen b4 & the last thing I want is for my beautiful site to show white space at the top LOL He had deleted the flash cards (is that what they are called?) saying the testimonials are in the flash file, but I still have them on my HD just in case. Can someone tell me what the problem is & how to fix it. This is my first time using flash & I want it to be a positive experience for all.
is it possible to have the snow moving from right to left?someone had designed something completly sideways as they were rotating there monitor 90 degrees instead of buying a video card that would do it for them.
View 3 RepliesI have some thumbnails on my stage inside a movieclip, and the following code which basically moves them right or left, when the mouse goes right or left. What I want to do is stop the scrolling when I rollout the movieclip which contains the thumbnails.
Here is the code:
Code:
panel.onRollOver = panelOver;
function panelOver() {
this.onEnterFrame = scrollPanel;
[Code]....
I just have a simple button set up to move a BOX on rollOver using tweens and move it back into position onRollOut.
Problem: The onRollOut function doesn't work consistantly. It works ok most of the time, but if I move the mouse quickly (not like crazy quick), the BOX doesn't get back into place.
Is there a way to "secure" an onRollOut statement to make sure it works at all time? I try also adding onReleaseOutside, onDragOut... but that is not the problem.
