I have this simple bit of code which is used regularly in my movie...
minNum = 1;
maxNum = 200;
number = Math.ceil(Math.random() * (maxNum - minNum + 1)) + (minNum - 1);
Is it possible to add something to this code to stop the same number being called more than once?
I thought I had a handle on the timer class (even just a beginners understanding), but I'm having trouble with it.I have an event listener for the timer and it starts fine i get a delay, then a tween,but when I place a myTimer.stop();in the fuction the listener called (to stop it) it dosent stop.it will repeat placing the first image, and then call the first function again
......Wait its placing the first image in (a couple of lines before the start), so Its restarting the whole movie, not just the function?
myTimer.addEventListener(TimerEvent.TIMER, tweenone)
myTimer.start();
function tweenone (event:Event):void[code]...........
On a recent project I am working on, I created an event-based sound engine. Different components within Flex will be registered, and then the controller will listen to events and handle the information correctly. So, it just takes a custom SoundEvent or ChannelEvent to alter one of the channels, or play a sound.
I can not quite figure out what is wrong with my code, and I am finding myself snow-blind to the issue at hand. At first, I was going to rewrite it but I figured it would be better to learn from my mistake. Also, I realize that this is not correct for streaming sounds, but I am working off a local sound library until I get it up and running smoothly.
Here is the code for the SoundEvent:
package code.events
{
import flash.events.Event;
public class SoundEvent extends Event
[code]....
Is it possible to play and stop a number of frames later, without using stop() in the frames? Like when I click a button frame 20 will start playing and it stops 30 frames later, all defined by the actions of the button..
View 3 RepliesIs it possible to play and stop a number of frames later, without using stop() in the frames? Like when I click a button frame 20 will start playing and it stops 30 frames later, all defined by the actions of the button.
View 3 RepliesI have a MovieClip.gotoAndPlay() statement in my code, but for some reason there is a chance that the statement will be completely ignored. When it's ignored, my movie acts as if the statement was never there, and I can't see a pattern in when my movie ignores the gotoAndPlay(). It seems like it just doesn't gotoAndPlay() when it feels like it.Anything that might stop a gotoAndPlay() from being called?
View 2 RepliesI'm trying to get a called swf to stop playing after a button is clicked.
I also need to have other swfs called on other btn clicks.
you'll see what I mean at
[Code]...
I am having problems with this function, which is called when a button is pressed. I am loading a JPG with a movieClipLoader into a newly created movieclip, and while this is loading the other is still viewable and is faded and deleted when the new JPG has fully loaded, using the code below:
ActionScript Code:
function loadBigPicture(iValue:Number, firstTime:String):Void {
this.createEmptyMovieClip("myBigPicture"+iValue, this.getNextHighestDepth());
trace(_level0["myBigPicture"+iValue]);
[Code].....
If the button is pressed extremely quickly again and again, the intervals begin to stop working
I have created a movie clip button but am stuck with the actionscript. I have created the rollover and rollout for this movie clip button but i want it to do 2 things after this i want it to go and stop on the first frame of a movieclip which has my content on it called portfoliogallery_mc (which is also the same instance name for it) when you then click the button i want it to go and play frame 11 of that movie clip portfolio gallery_mc. Here is my current actionscript i HAVE Flash 8 on my comp that i am currently using. Please note my actions are on a layer called actions and not on the movieclip button itself. nxtimagetwo_mc (is the movie clip button/instance of mc)
[Code]...
I'm having an issue with setInterval/clearInterval when it comes to dealing with objects. Take this example:
[Code]...
Why does clearInterval not stop the interval? Does clearInterval not work when called inside a setInterval? Am I doing something wrong? How do I get it to delete the interval when it reaches a certain count?
I want to load an external swf called 'signs.swf' into an empty mc called 'signholder'.
var loadit2 = new Loader();
loadit2.load(new URLRequest("signs.swf"));
signholder.addChild(loadit2);
Everything works. Cool. But, I now want to target something within the signs.swf. How do I do it though? What is the path? Do I have to give the child of signholder an instance name? Everything I try fails.
If I wanted the root timeline of the external swf to gotoAndPlay(2) for example,...would i say...
signholder.loadit2.gotoAndPlay(2) ???
var wow:MovieClip = loadit2.content as MovieClip;
wow.gotoAndPlay(2) ????
I am having issues with startDrag(). I have a movie clip called circle. Inside circle, I have a movie clip called circleFill and another called circleOutline.onEnterFrame, this movieClip is duplicated 4 times.
When I use this:
private function onPressNow(event:MouseEvent):void
{
startDrag();
}
IT DRAGS ALL 4 MOVIECLIPS.
[Code]...
how can I make it drag my movieClip called circle? (meaning both circleFill and outlineFill)
i have a box called infoBox that contains a text field called caption. infoBox expands on mouse-over. When it does so, I do not want the text in caption to scale up - I want it to stay at 11 pt. So far my code to prevent this from happening is not working:How do I fix this?[URL]..
View 2 RepliesOkay, so I've got a happy little movie that shows an atom diagram. Every seven frames shows an electron popping up in the ring around the nucleus. This is all contained in a movie clip. I want a button that when pressed, tells the movie clip with the atom to advance the seven frames ( making an electron pop up ) and then stop. The same button if pressed again, will advance the movie clip an additional seven frames ( thus adding another electron ).
I've looked around quite a bit but haven't found a solution that will work for me. Also, I am working in AS2. (if you're feeling especially helpful, do you also know how to do the same but in reverse? I've found how to play movie clips in reverse, but not for a certain frame interval.)
I'm working on a visualisation where the user inputs the number of songs they have and it shows you a visual of how many CDs this is (for a uni assignment). I have my variable 'output' and somehow I need to code a button so that when the user clicks it it takes them to my movie clip 'cdstack' frame 'output - 10' and plays then stops when it gets to frame 'output'. So it will play for ten frames then stop when it reaches 'output'.
View 1 RepliesI have a movie clip that loads variables from an XML file. One of those variables is a number between 1 and 100. I have an movie clip file of a "speedometer" that has a needle. The needle is set with a motion tween between frame #1 and frame #100. The number in the XML file is, currently, set to "gotoAndStop" to the corresponding frame # in the speedometer movie clip. What I want to do is for the speedometer to "play" and THEN stop at the frame # that corresponds to what the XML is feeding it. All of this happens "on load". There is no "button" that activates it.
Here's the code I have for the parsing the XML into the speedometer. This is working. I just want it to "play" then "stop".
Code:
var SideGRAPH_01_01:XMLList=contentINPUT_01.StudentRptItemDetailDefinitions.StudentRptItemDetailDefinition.(@StudentRptItemDetailID=="5").(@Seq=="1").attribute("Value");
for each (var GRAPHElement_01_01:XML in SideGRAPH_01_01) {
MovieClip(root).page_01.dashboard.speedometer.gotoAndStop(GRAPHElement_01_01);
}
I am new to AS3. Trying to create a dice that generates a random number.Almost got there, but I can't get the dice to stop continuously generating a new number.[code]
View 2 RepliesI need to make the whole ad repeat X number of times and then stop on the last frame (it always stops in the first frame for me) then I need to link the clickable button to go to a website when clicked. [URL]
View 4 RepliesIm tring to create a slot machine game...I have a mask.and I have 3 layers each of which has a motion tween of 120 frames.they animate my 3 slots..the problem is how and where I can assign a random number so that the motion tween should stop at any image.?
[Code]...
I have a wordpress based site that stores information about an image in a database field called "background" in a table called "wp_postmeta".The 'loader' gets an url such as "/thisImage/background.swf"The "background.swf" should somehow display "background.jpg" instead but since I've changed the field name in the database (from background to temp_background) it doesn't work.I pass variables to the "loader" swf and they are correct based on the new field name but it still isn't working.I need to know if there is anything in the .fla's (and therefore the .swfs) that is pointing to somewhere in the database hard-coded. Basically I need someone to look at them and tell me how they are working.
View 2 Repliesi'm trying to control a movie clip called "nosotrosmc" with a frame label inside called "historia" but does not work this is the code:
[Code]...
Dear Guys I Want To Generate A Random Number Between 2 Number BUT Without Generating 2 Same Number I Mean If For Example Already Generated Number "2" Next Time Did Not Generate It , Is There Any Solution
View 5 RepliesI just finished a simple music player... For testing purposes. I upload it in the following address:http:[url]....with 10 music songs that I had recorded from radio stations(added the last 2 twice for testing).The problem is that when a song has totally loaded, stop action taken needs about 1 second to be applied!I.e. When I press "STOP", the sound continue to play for 1 sec before stop. When I push "pause" it takes one second for the music to stop!
However when using resume (second time pause) the sound starts instantly! Thus I guess there is an issue with stop()function of the SoundChannel object that I am using to stop the sound. Also notice that when unpause the music, it continue ~one second before the last sound - which means that I saved the soundChannel.position number (and also call soundChannel.stop()) in correct time, but it didn't stop immediately - bug!?
This only happens when the application runs through a browser(plugin v. 10) - programmed in CS3.
PS1. Notice that ,this also happens when I change Volume too. Thus because Stop and Volume are parts of SoundChannel, I guess there might be a bug with SoundChannel in online plugins..... :/
PS2. Notice that ,this also happens when I close the browser (firefox). Even if browser is closed the music continue for 1 sec the same way as when pressing stop!.. Thus I guess it's flash bug!...
I Want To Generate A Random Number Between 2 Number BUT Without Generating 2 Same Number I Mean If For Example Already Generated Number "2" Next Time Did Not Generate It,
View 4 Repliesi'm trying to build a flash site and ran into a problem... i have a gallery page with a bunch of page numbers at the top. when you click on one, a movieclip loads of some images coming in.so the problem i'm having is that i made a little animation for when you roll the mouse over the page number (they scale up when the mouse is over, scale back when the cursor moves away)... what it's doing is when you roll over, it goes to a certain frame in the timeline and plays that animation.that's all working cool, but i need it to not do that once it's clicked on. so basically when you actually click on a page number, the over script should stop until you go to another page... here's the code i've written,
function over(event:MouseEvent):void {
this.gotoAndPlay(30);}
function out(event:MouseEvent):void {[code].....
i have a movieclip on my stage called dude inside the moviclip is a frame with a movie clip called axeframe with yet another movie clip called axe. what i want to do is make a hittest in the axeframe a so that when the axe (only axe not the character) hits an enemy(named enemy) on the stage he will disappear. this is my code:
[Code]...
Inside my code i have some variables declared as Numbers, and i get some others from an external source; these variables can either be Numbers or String representation of Numbers. Now, i have to implement some equality controls on these variables, and since i don't know in that moment which type are them of, i'm converting all of them to Numbers (i don't need and neither want to compare strings) via the Number() function which accepts either Numbers or Strings as an input. These controls can compare 2 single variables or a variable and a sum (or subtraction) of other variables, for example:
[Code]....
I have a contact form for which I have a tween. That contact form consists of two keyframes, first the form, I tried putting the code stop(); in the first keyframe but it didn't stop. I then changed stop(); to _root.stop();, which didn't work either. I have to stop it because otherwise users would see a thank you note before they even enter their details. What can I do? Converting to movieclip didn't work either, besides it puts a funny character when I press AltGr
View 2 RepliesI'm trying to create a shuffle button for my mp3 player. I don't want it to repeat any song in the xml playlist until all the songs are played. Is there to display a random number on the click of a button, without repeating any number in the array until all the numbers in the array are used?
View 9 Repliesmy functions in this fla i have. I use the function to create a random number and the char move accordingly depending on the number.
View 4 Replies