I am trying to run a for loop that creates multiple instances of a movieclip.
public function movieclip()
for(var i:int; i < 4; i++) var
square_mc1:mcSquare = new mcSquare();
[code].....
I am trying to make a sound crossfading between the loops (an example would be: same as in a "Winamp" media player you toggle the Crossfading function in a Modern Skin and select a duration of it). Say I got a loop of 10 seconds, altho it is not perfect as its cut of the song without a proper editing tool. Any way I could accomplish it by using the ActionScript?
View 2 RepliesI am trying to create 6 TextFields with a loop which I have done but I can't seem to figure out the right syntax for setting the properties such as font, size, etc. in the loop. Here is my basic code:
var Tiles:Array = new Array();for (var i:Number = 1; i< 7; i++){Titles[i] = new TextField();
Titles[i].TextFormat.size = 17;}addChild(Titles[f]);}
I have created 2 separate arrays. One that contains all of the "options" and the other which contains all of the "products". Since the products change depending on the options, this way I can just update the products array whenever the filtering options get changed.So far, everything is working as expected. I can change the filters whenever I want and tabbing works exactly as expected.The problem arises when I click on one of the products.This brings up an informational popup. When that happens, I loop through the products array and the options array and set tabEnabled to false on all of them so that you can't tab through to items in the background. This works great. When you close the popup, I once again loop through the products and options arrays and set tabEnabled to true, but this is where the weird happens.
What happens is that you can now tab through the options and it goes through them all just fine, but when it gets to the end of the options, where it would normally start tabbing through the products, it skips them and goes back to the beginning of the options. HOWEVER, if you shift-tab from the beginning of the options, it goes to the products and as long as you are shift-tabbing, it will cycle through only the products. If you release shift and tab normally, it will tab through the products and when it reaches the end, jumps over to the options and tabs through those, once again skipping the products unless you are shift-tabbing.
I have traced the tab indexes and they aren't changing. I have no focusManagers implemented in the entire project. All of the various items are added programatically and dynamically at runtime. I'm at a loss here, and haven't been able to find anyone else with a similar problem... Any thoughts? Most of the options items are components (radioButtons and Checkboxes) if that might make a difference.On a side note, it also seems like whenever I set tabEnabled to false, when I set it back to true, I have to set focusRect to true as well. It seems to automatically set focusRect to false when you set tabEnabled to false as well. Is that normal? Seems like those should be independent of each other
I'm trying to create a grid of hexagons by using nested for loops. I picked up this code trawling the forums but this creates a diamond shaped pattern of hexes rather than neat rows that interlock together. I want to create one row in the first place, increment the x and y placing coords so as the next row is offset as appropriate to lock it into place under row above.
This is the code I'm using, which is clearly not doing the trick.
spacing = 35;
spacing2 = 35;
for (x = 0; x < 10; x++){
[Code]....
I create buttons, but I am trying to give them each instance names so can target them individually but I keep getting undefined property error.
Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
var menu_items:Array = ["CHAPTER I","CHAPTER II","CHAPTER III"];
[code]....
I have a button that is a movie clip that is set up with animations triggered with MOUSE_OVER and MOUSE_OUT event listeners. The glitch is that once the mouse is over the button ... each ensuing pixel that the mouse is moved, loops the animation again. That probably didn't make a whole lot of sense, so I posted the file on my test site [URL]. You have to drag your mouse slowly across the button to see this. The bottom part of the button works as I'd expect. When you roll over the text at the bottom of the button, everything functions as it should. The looping problem starts when you roll over the image portion of the button. For some reason it considers each consecutive pixel rolled over to be a new event and consequently triggers the "over" animation again.
The code I have is below. I've commented out the MOUSE_OUT function for now. There is also a screenshot at the above link of my Layers palette for the button clip in question. I put a "stop" label at each frame that has an action so you see the actions used.
oneBedButton_mc.buttonMode = true;
oneBedButton_mc.addEventListener(MouseEvent.MOUSE_OVER, overEffect);
//oneBedButton_mc.addEventListener(MouseEvent.MOUSE_OUT, outEffect);
function overEffect (e:MouseEvent) {
oneBedButton_mc.gotoAndPlay("over");}
function outEffect (e:MouseEvent) {
oneBedButton_mc.gotoAndPlay("out");}
I'd like to add event listeners to movieclips (already on the stage), whose names are called from an array one by one, into a for loop.
Code:
// there are 4 movielcips on the stage with name a1 - a4.
// create array
var Bro:Array = ["a1","a2","a3","a4"];
// for loop
for ( var i:Number = 0; i < 4; i++) {
// Add event listener to array values to buttons.
Bro[i].addEventListener(MouseEvent.ROLL_OVER, roll, false, 0, true);
//execute this function on rollover
function roll() {
trace("why wont my arrays work in for loops");
}}
[Code]....
I'm stucked here. I want the font type "BauhausMedium" to apply when ft_01 is clicked, font type "Haettenschweiler" to apply when ft_02 is clicked, etc... at the same time I want all" ft_01a", "ft_02a", "ft_03a" movieclips to hide except for the movieclip similar to the clicked button. E.g. if "ft_02" was clicked ft_02a to be visible =true and rest to be visible = false (ft_01a, ft_03a).
It's just a pure curiosity of mine . I'm using flash to create movie clip objects and never thought about creating them programatically. But today I came across this articlevertheless, there's no official explanation of the process.What if I have e.g. 5 images, and I wanna turn them into a short piece of animation. How can I do it using pure actionscript 3?
View 5 RepliesTo illustrate what I'm trying to do I think the best point of reference would be something like the original "The Legend of Zelda" game, that is, a top-down adventure type game, with single-screen areas created using a grid of images.I'm trying to create something similar for a local charity's website, something in which the player can navigate a created area and find out about the charity by interacting with NPC staff.The environments in the above game seem to be a grid of images representing various environmental objects. Up until this point in my project I've only had to add single objects. I'd do that like this:
Code:
// add a single placeholder graphic
public var myStage:Loader = new Loader();
[code]........
After a click event I want to dynamically create 2 movieclips with the sequential number in their name, e.g. mc_001 & mv_001 so that I can 'link' them together later on.How can I create a movieclip with a dynamic name?I am trying to use this at the moment:Code:var movieclip["name"+dynamicNumber]:MovieClip = new MovieClip();I can't use an array unless someone can tell me how to access it across multiple classes...
View 6 RepliesIs there any way to create dynamic animations? Say if I'm creating a game and there might be multiple sprite sheets for different NPC's, would I have to manually create the walking/whatever other animations manually?
View 5 RepliesI have a problem creating multiple movieclips inside a container mc. The one created later always overwrited the one created immediately before it and ended up with only the last one left in the container mc. Below is the code:
[Code]...
I am new to Action Scripting 3 and am struggling to create movieclips in a for loop. Basically I am trying to create a series for movieclips and add these to my stage based on an array of values.
[Code]...
I'm trying to create a container movie clip, then inside that, create several other movieclips with an image in each and display them with an offset x.It does the offsetting but only displays the last one at the last x.When i dont put the clips in a container it works fine. but i want them in the container so that i can movie the container around on a press.
Heres the code:
var itemsArray = new Array("pic1.jpg", "pic2.jpg", "pic3.jpg", "pic4.jpg");
var clipArray = new Array();
_root.createEmptyMovieClip("carousel", this.getNextHighestDepth());
[code]....
I have the following code, which should display some square clickable clips over a map. This is done by calling a function (shown below) with arguments. However, when I call this function, only the last box is shown... The clips are drawn on the same level (9000) but that should not be a problem as they wont overlay...functions calls....
ActionScript Code:
clipsideD=150;
city="Rome"
cityText=romeText
[code]....
Alright, So i have a function which generates alot of the same MovieClip on the stage, however i need to be able to both Hitcheck this MovieClips and Remove them in other functions, so somehow ( what i have attempted here and isn't quite working yet :confused: ) is putting each MovieClip in an array slot, so if you needed to remove them it would be as simple as a For Loop to run through the Array.
Also, when i hittest them, optimally since they are all in an array, i could just reference them via MovieClip.Hittest (movieClipArray[i]) i being the instance to remove.
Background for the project, adding and removing colored MovieClips Which are all systematically distributed on the stage. When the player Pushes the # Keys color it would run the construct function creating the MovieClips on screen. After that if the player hit the same color key again, before generating a new layout it will remove the previous first.
Also a key is to be able to hittest the colors against other MovieClips on stage so it needs to be linkable. Right now im attempting that by containing all my generated colors in
ActionScript Code:
"ColorContainer"
Currently my color Remove Function has Children Being removing which aren't referenced to the Array, i realize this... But want to get the generation of the Array down before i start cutting away at it.
Here is the code i have so far: For some reason i keep getting:
ActionScript Code:
TypeError: Error #1007: Instantiation attempted on a non-constructor.
at ColorantConfusion_Current_fla::MainTimeline/frame1()
[Code].....
I have set up a Qwerty keyboard within a swf using duplicateMovieClip() - all works fine. If I have no tabbing whatsoever then I can use the tab key to randomly jump all over the keyboard.
But I would like it to tab in an order. Other buttons at the _root level are tabbing fine but these dynamically created ones are not doing a thing.
The keyboard buttons are created within a movieclip called mcContent which is sat at the _root level, anything within this mc is usually referenced by mcContent. or _level0.mcContent. (if it is being really fussy).
I have an instructions button - if this is NOT included in the tabIndex then the tabbing will work on the keyboard, erratically, but it at least goes there. As soon as I set _root.mcInstructionsBtn.tabIndex = 1; then nothing but the _root level buttons work
I have tried to add the tabIndex when creating the movieclips but this has not worked either. I have tried to set the tabIndex in a copy version where the keyboard buttons are created at the _root level and it functions exactly the same.
create movieclips in a for loop.Basically I am trying to create a series for movieclips and add these to my stage based on an array of values.
for (var i:Number = 0; i < product_total; i++) {
product_mc.name = productid[i]
addChild(product_mc);
[code]....
This code works fine to add one but I can't add more instances?Appears addChild not render mutiple instances on the stage.
I make classes that extend movie clip, but I want to dynamicaly create instances of this class, so I really create MovieClips, but with the added features of the class. How should I create this instances? I want 'this' to be the root of this new movieclip with added features
View 4 RepliesI'm trying to create 10 empty mc using a for loop, with each mc containing a textfield. Below's how i've done it...
Code:
yPos = 0;
for ( i = 0; i < 10; i++ )
[code].....
I am trying to create a movieclip, load a jpg into it, and if successfull, create another movieclip (or even better: create that movieclip right away too), with a textfield in it, and place it under the loaded jpg, depending on the postion and height of the jpg. I tried something like this, but the jpg and text don't show.
Code:
this.createEmptyMovieClip("nieuwsfotoMC", 2);
nieuwsfotoMC._x = 15;
nieuwsfotoMC._y = 194;
var loadFoto:LoadVars = new LoadVars();
[code]....
creating some with the .createEmptyMovieClip() method.you see i have a variable rks and accoding to the amount specified in the rks,i want flash to create that number of movieclips
View 2 Replieswhere I can find a tutorial to create resizable movie clips? The viewer should be able to resize movie clips during playtime... I tried a lot of things... the objects get resized but they just "blow up" from all sides...
View 3 RepliesI make classes that extend movie clip, but I want to dynamicaly create instances of this class, create MovieClips, but with the added features of the class. How should I create this instances?
View 4 RepliesI'm trying to create 10 empty mc using a for loop, with each mc containing a textfield. Below's how i've done it...
[Code]....
I'm trying to create a series of scripts that will create some custom event listeners. I have three movie clips on my stage. One is a movieclip who's sole function is to hold array's and the event listeners. A second which moves around the screen. And a third that is motionless. The problem is that the argument I want to test (which activates the custom event) is held within a string. What I want to know is, how do you test to see if the string argument is true?
Is it something similar to this:
var myCode:String="1<0";
if(myCode){
trace('one is smaller than 0'); //Strangely apparently one IS smaller than 0!!!
}
I think I'm going about this in the wrong manner, however this is the only way I can think of this working... (since I need to be able to dynamically create these events).
I have a problem creating multiple mc's and adding images inside each mc. This will add all the images inside last movieclip...
[Code]...
I'm trying to create a magnify glass tool.I am familiar with copypixels() function for Bitmaps so i've had no problem making a magnify glass on a regular bitmap image, the problem is i want to magnify a movieclip full of other movieclips, layers, videos, active links etc....is there an efficient way to do this? i really dont want to load the whole thing into another movieclip just bigger....?
The idea is that the user can scan over the content and read, view, watch in a slightly bigger view.I have a zoom function when the user goes to full screen mode but this isn't an option in this case.
