I am using Senocular's code to dynamically create part of a circle using curveto.I am wondering how to change the start point, like where the circle outline starts. It is currently starting on the right of the circle, I would like it to start on top. How would I go about doing that?Here is Senocular's code:
Code:
// x: circles center x, y: circles center y
// a1: first angle, a2: angle to draw to, r: radius
[code]....
I want to add point to curve when i click on the curve ,make sure the Original point not change ,eg. a Original point is a control point after add it is Still a control point ，so，may be it is need add two point at the same time
View 3 RepliesLineTo() and curveTo() provide basic level drawing. However, the lines these functions produce look like they were drawn by the line or pen tools. Is there any way, through either existing functions or through modifying current ones, that I could made the drawings done through actionscript look like they were drawn using the brush tool?
My first thought was to see if this was in default actionscript and could not find it. My second was to see if someone had already created the class, and while for a time I thought someone had, I lost the link . I guess I could always create the class myself, but I honestly have no starting point (like what algorithm flash uses to create its brushstrokes) and don't want to waste my time if something similar is already in existence.
how to make a video start playing at a specified point in the middle of the video rather than from the beginning. Not sure if it's something that easily can be done in Dreamweaver or if it's involved with the flash settings.
View 21 Repliesi have mc cruisin along a sin wave curve, code:
[code]...
Q: how can i set an orgin/start point?
I've been working on a video-centric project that requires a very specifically designed video player, which I've built from scratch -- no skin. Things were going great until I actually uploaded the video and SWF to my server and tried it out. Here's the issue: The video, which is an F4V that's been imported into Flash as an external asset -- I'm not using NetStream, nor am I using a Flash media server -- starts loading almost immediately. But when you use the custom-built scrubber bar to jump ahead in the video, it freezes up until, I presume, the video has loaded to that point, at which time the video starts again. If you open the SWF and let it sit for a few minutes, this isn't an issue -- you can jump back and forth as much as you want.
So clearly the problem here is that the video is loading from the beginning and the user can only get to a certain frame when that frame has already been loaded. But it must be possible to start loading from a specified point, right? After all, the video doesn't load all together and become available only when the whole thing is done. It starts loading at 0:00 and continues progressively. I just want to change where it starts loading by telling it not only to play at that point but to start loading at that point, too.
Basically the code below has been designed so that a video starts at 52 seconds (rather than the beginning) when you press play. It works good right now, starts where it's supposed to, but I want to change the code so that it autoplays the video starting at 52 seconds. The problem with this though, is that when I try and set it for autoplay, the video starts at the beginning and doesn't wait for it to load to 52 seconds before it autoplays. Any input on the coding? I need it just so that the autoplay doesn't kick in until the video is loaded to the 52 second point
import fl.video.MetadataEvent;import fl.video.VideoProgressEvent;
import fl.video.*;
my_FLVPlybk.addEventListener(VideoEvent.COMPLETE, rewind);function
[code]....
I'm having a problem and I do not think the solution. I'm new using Flash.I have a video player and now we are implementing an HD button, the player always starts the video and 360P format and stream begins, if the user click on the HD I need to save the time of the video when it was clicked and then call another file. mp4 720P and start it at the same point that was recorded.I've tried various ways using CONNECTION.STREAM.seek(TIME); and always starts at (0), I feel that because of not being in Buffering he does not understand
View 1 RepliesGood afternoon staff. I'm having a problem and I do not think the solution. I'm new using Flash. I have a video player AS3 and now we are implementing an HD button, the player always starts the video and 360P format and stream begins, if the user click on the HD I need to save the time of the video when it was clicked and then call another file. mp4 720P and start it at the same point that was recorded. I've tried various ways using CONNECTION.STREAM.seek(TIME); and always starts at (0), I feel that because of not being in Buffering he does not understand. Can anyone help me solve this?
View 0 RepliesI was trying to modify the kirupa "falling snow" tutorial into a water bubbles effect which is just making it up side down. However, I was having trouble to make the bubble start from a certain point in a movie. For example, I was trying to make the bubble start from the bottom of the screen, but it didn't seem to work for me. Therefore, I was hoping if there is someone who can help me to solve the problem.
View 7 RepliesI am trying to use Flex Video Display as a preview player. The player is streaming the video from the server.While The buffering is not complete, if we try to drag the play head to an area beyond buffered region, the player will drag the playhead back to the current playing position. I need to implement the player like you tube video player which allows to drag to anywhere in the track even when data is not fully buffered.Is there a way for doing this.
View 1 RepliesI'm trying to have a movie clip with 4 buttons that moves to the four corners of the stage.Depending on which button is clicked, the movie clip goes to that corner.he trouble I'm running into is determining the variable start points. If the end goal is the lower right corner, it needs to be able to move there from the upper left, the lower left and the upper right. So I need to set the starting position as a variable I assume, but can't get it working.
View 2 RepliesI'm designing a platformer game, in which the code is all held within the character MC. I want to pause the game using something like 'delete this.onEnterFrame' as a start point to terminate code. The code layout within the character is like so:
onClipEvent (enterFrame) {
...
this.onEnterFrame = function(){ //within clip event
...
if(btnon == 1){ // when button pressed(on stage)) global value of 1 is true
delete this.onEnterFrame;
}...}}
Due to the fact its within a clip event structure, it doesn't pause it, instead it slows everything down. Would I have to construct all my code in a frame layer or can I still use an MC to terminate this?
Setting up a web page to progressively stream video to whoever goes to that page. We are not streaming live video but streaming a video fileon the server.
The Question: Instead of starting the video at the begining we want the video to start at some mid-point based on the time of day... (therefore emulating "joining" a live broadcast.)
Now I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 RepliesI have a long mp3 file hosted on a standard apache server (30 minutes long so far, but I would like it to work with longer sounds too).I'd like to start playback of this audio within at a specified point. When attempting to use Flash Actionscript 3, my basic tests show that ALL the audio from the start to the position I choose is buffered before playback (Sound.bytesLoaded was my friend here). If I start one second in, it takes about 3 seconds to start playback, 30 seconds in, takes about 25 secondsObviously with a really long mp3, like skipping playback to the middle of a 3-hour audiobook, this isn't going to be practical.Here's the ActionScript 3.0 code I'm using:
button.addEventListener(MouseEvent.MOUSE_DOWN, function():void {
var s:Sound = new Sound();
var req:URLRequest = new URLRequest("http://example.com/audio.mp3");
[code].....
Can I use curveTo on a line that already exists?
I want to make a line bend as animation...
Take the following AS3 that will draw a curved line using curveTo()[CODE]...
View 3 RepliesI have tried to draw a circle using drawing API curveTo function. But the result is not a perfect circle. Flash documents also suggest this method. Check this link >> This is the code I have used to make a circle of radius R and the registration point of circle movie clip is at the center.
[Code]...
I have a curveTo line and want to duplicate movieClips and run them along its path to represent the direction of flow from 1 point to the other.
View 3 RepliesAnybody got a method of drawing a line from the mouse down point to the mouses current position.
But taking into account the direction the mouse is moving in to make the curve look more natural and directional.
This is what i have currently which is basic and rubbish:
catapultLine.graphics.moveTo(startX, startY);
catapultLine.graphics.curveTo(Main.gameStage.mouse X/3, Main.gameStage.mouseY/3,Main.gameStage.mouseX, Main.gameStage.mouseY);
Basically I'm using the curveTo function to draw some lines for flight paths, what I'm not sure how to do is dynamically finding the curve points, so for example if you look at the ryan air site: [URL]
current_line.graphics.curveTo(curveX, curveY, map.mouseX, map.mouseY);
I need to find the curveX and curveY
I've got some code that reveals a mask in that swooshy/wavy style, which starts of nice and smooth at the top of the reveal but as it gets further down the page it speeds up and doesn't look smooth.Here is the code. I've also attached the example of what it is doing.I've been looking at this code blankly for a couple days now and I'm still no furher forward.
Code:
//Global vars
mWidth = 600;
[code].....
I'm just starting out with AS3, so I'm trying my hand as some of the more basic drawing functions, to try and get a handle on them. The problem I've hit is using 'curveTo' to create a smooth curve is creating some very poor aliasing results. Here is an example: [URL]
The first part (which is actually on the right) is a very simple curve from 50,50 to 100,100, through 100,50. I would have expected the end points of the line to be single pixel width, but it's aliased over two pixels.
The second part (on the left) shows why this is a problem for me. I'm trying to draw a basic shape outline with a semi-circle at the top, but it really doesn't look great (it looks shifted half a pixel to the left relative to the rest of the shape).
[Code].....
"mc.graphics.moveTo"and...mc.graphics.curveTo....to draw out some dynamic lines.What I need is some sort of equation that sets the "controlX" and "controlY"depending on how long the line is and in what position it is.The below is a pile of pap and doesnt actually work... but thats me trying to figure out some set equation for it...
Code:
lineForItem.graphics.moveTo(childDisplay.x, childDisplay.y);
var newB:int = familyData.mumsY - childDisplay.y / 2
[code].....
Im pushing Point locations into an array to Shift em out later. like this:
tempmoves.push([new Point(roundx,roundy)]);
..
ob.movestoplayer = tempmoves;[code]....
What am i doing wrong?
It's been a long time since I've done any work with actionscript, and alas I've forgotten nearly everything. I've tried to look for a tutorial that would explain basic animation with actionscript, but the one that I found on Kirupa was no longer there.
Basically I'd like to do this:On the stage I have a movieclip and I'd like the movieclip to move along the x-axis to a certain point and then back to the starting point again. The moving speed of the movieclip should also be adjustable.
I'm creating a game in flash for a university project, and learning actionscript and programming as I go. I'm very much still at a beginner level - at the moment al I have is some actionscript for drawing rectangles and moving them about the screen. This is what I'm having trouble with at the moment: I have a class called 'Creature', and I want instances of it to interact with each other. I want them to do something when they come within a certain distance of another instance. And I want them to be able to pick a random other instance to get the location of, in order to do something with that information.
What I think I need is: A function for telling the distance between two (x,y) points.
A way of referencing the nearest other instance of the class. And a way of randomly selecting from all of the instances of the class.
How to convert 3d point to 2d point? I've found next formula in Internet(camera is situated in origin)
[Code]....
But these formulae give me strange result when z are less than zero(z<0) I need build line from A(100,100,100) to B (100,100;-100) As you can see these equations give really strange result when I try to convert B point in 2D dimension
i have the follow issue :
I have a point which is setted at the border on a component, with changed transform point to the center of a component in order to match the component rotation.
the important part is when i try to get the point XY after rotation - they remains the same as before rotation.
how to get XY, after rotation ( changeing point.rotation property to specific degrees of rotaion )