ActionScript 3.0 :: Exporting Library Assets To Frame One Causes Delay
Apr 20, 2010
I have several small movie clips saved in the library of myCS4 Flash.fla file, I want to make them available to dynamically add to the display list as children, based on the button clicks of the viewer. I can get it all to work fine via Symbol Properties > Linkage > Export for Actionscript. When the movie clips are set to "export for actionscript" from the Library, playback seems to hang on frame 1 until all of these exported assets have downloaded.
The big problem is that I have an ultra-simple but totally custom preloader/progress animation coded in a loop in the second and third frames, which kicks out to frame 4 and continues playback as soon as the download is complete. Because of this, the preloader has essentially become useless - because all that can be seen is several seconds of empty stage, until the vast majority of the bulky assets have downloaded. Then the preloader flashes onstage for just an instant, and disappears because the content is already up.
So, my questions are:
A) Is there a SIMPLE alternate method to load these library assets in such a way that it doesn't cause this major lag on frame 1?
B) Failing that, I suspect I may have to retool my preloader to run as an ENTER_FRAME event in frame 1. Is this worth the effort (can this potentially resolve the lag issue and allow for a meaningful preload progress animation, despite the lag from the asset export?)
View 1 Replies
Similar Posts:
Mar 9, 2010
I have some fairly large movieclips in the library which need to be dynamically loaded at runtime. I don't want to export them all in frame 1, because that would slow down initial loading of the movie. I tried putting an instance of each of these clips later in the timeline where they wouldn't normally be encountered. When I then tried to load one from the library dynamically, I was able to successfully get an instance of the movieclip, but its currentFrame property was 0 and I couldn't see anything on the stage. As soon as I enabled "Export in frame 1", it worked properly. Does this old trick of putting an instance on the timeline somewhere no longer work in AS3?
View 1 Replies
Dec 15, 2010
I started using Flash CS5. I spent many hours working on a .FLA file. Saving as I went and at one point Flash CS5 crashed during the save. The .fla file is now corrupt. The new .fla format is essentially a .zip file. So I was able to change the file name to *.zip and explore inside of it. The DOMDocument.xml file is corrupt and dead. The DOMDocument.xml is the timeline so all my placement and animation is gone. However, my LIBRARY folder is in tact and has all of my library items as *.xml files. How I can get those library items into another .fla file so I don't lose ALL my work? I've tried creating a new .fla file and dragging the LIBRARY folder into the new .fla, but my library items don't show up when I load the new .fla in the Flash CS5 IDE.
View 2 Replies
Feb 19, 2009
Since I can access the library assets from external class, I have a question :
1. Is it possible to use any of library assets of one movie into another? Let's say in my movie A, I have McA1 movieclip in the library. Is it possible to access/display/addChild McA1 in movie B?
2. If there's a case that Movie B is loaded into Movie A - does all the library from Movie B will be inherited into movie A - vice versa - so it makes them accessible?
3. If the answer of 1, and 2, is no and no, is there any work around to make any library asset accessible accross the board? Is this what so called runtime sharing? Do you have any resource that I can refer to?
View 5 Replies
Sep 9, 2009
I have fla_A, and fla_B. fla_B contains a single MovieClip which contains a bunch of MovieClips that are all set to Export for ActionScript (NOT first frame, as this will need to be preloaded). I want to load fla_B into fla_A, and be able to instantiate the nested clips (inside fla_B) as if they were native to fla_A itself.
After loading the swf, I'm using:
[Code].....
Can I cast "e.currentTarget" as something useful like MovieClip (well, not MovieClip, 'cause that doesn't work), or something that will stick around from which I can dynamically load things?
View 1 Replies
Jan 8, 2011
I have a great shared library tutorial BUT I don't like one section. Assets.swf is the shared library with a variable array called availablegraphics on it's timeline where we put in the available assets That is the bit I don't like. Isn't there a better way to loop through to get the assets. Also they use a loop using library.availablegraphics - which I have never seen before and seems a little weird. In conclusion it's great but is there a better post or tutorial on shared library and how to loop through the assets without knowing exactly what or how many there are.
[Code]...
View 4 Replies
Sep 8, 2011
Specifically, various MovieClips seem to be missing all of its content. I work in flash for a while, make a series of changes, save the file and close it, and then reopen the file. Upon reopening, the artwork inside the MovieClip does not appear. The former artowrk can be bitmaps, shapes, drawn objects, or even other symbols. I can take the time to replace the missing artowrk inside the symbol (the symbol is still there on the stage and in the library, just the artwork is missing), but three saves and closes from now, the artwork may be gone again, or new MovieClips may appear empty - there appears to be no discernable pattern yet.
View 1 Replies
Dec 6, 2009
When I drag and drop images in flash library, the path is sometimes relative (./somefolder/someimage.png), and sometimes it is absolute (D:lahsomefoldersomeimage.png).
How can I use only relative paths in flash library in order to be able to update all images from any computer and/or from any folder ?
View 1 Replies
Oct 10, 2011
what I am trying to do is create class that loads assets(images) from library and places them on the a stage.I want my class to be something like this...I know it needs to be more complex, I am just trying to "draw" out my idea for you, I have tried using getDefinitionByName to pass the linked MovieClip and some variations on that but for some reason I can't get it to work.[code]
View 3 Replies
Feb 19, 2010
I'm building an avatar class that will allow a user to swap out character assets during runtime. The idea is pretty straight forward. The artist I am working with designed the art assets for the individual pieces of the avatar and performed the animations in flash. Since the animations were created in flash using vector art as opposed to pre-rendered 3d, I want to simply replace each individual movieclip within the animation with the asset selected by the player.
Problem:The issue i'm running into is that the animations have several key frames. My thought is to load the avatar object (an external swf) into my main application. Once loaded, I obtain a reference to all library assets that are used in the animations. For example, to get the face, I have something like:
Code:
if(this.loaderInfo.applicationDomain.hasDefinition("face"))
{
[code].....
View 4 Replies
Dec 13, 2010
I have a swf called "myfile.swf" with a mp3 set to export for actionscript, and the Class has been called "soundName"With the following code, the sound plays great...
Actionscript Code:
var bgURL:URLRequest = new URLRequest("myfile.swf");var swfLoader:Loader = new Loader();swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadProdComplete);swfLoader.load(bgURL);function loadProdComplete(e:Event):void { var tmpSound:Class = e.target.applicationDomain.getDefinition("soundName") as Class; var snd:Sound = new tmpSound() as Sound; snd.play();}
This lets the sound play great. But, because of what I'm trying to do, i would like it better to put the swf into a movieclip, then play the sound from there.
But i cannot seem to get it to work. The following code adds the movieclip to the stage fine, but then i have no way of accessing the library assets (i.e the "soundName" mp3) from the swf inside of the movieclip.
Actionscript Code:
var bgURL:URLRequest = new URLRequest("myfile.swf");var swfLoader:Loader = new Loader();swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadProdComplete);swfLoader.load(bgURL);function
[code]....
View 2 Replies
Mar 26, 2009
This is the concept I want to get into code:
1) Have a Document Class attached to the Main.swf
2) Have a Assets.swf that has all MovieClips that set to Export and have been given actual Classes.
3) Have the document class Load the Assets.swf.
4) Once loaded, be able to create instances of the MovieClips from Assets.swf by writing the code in the Document Class of Main.swf
I can get all this to work.. However what I am finding is if I have a public function on the Document class that creates an instance of something from the Assets.swf, lets say var okTest:TestClass = new TestClass(); I have to also import it in the Document Class (import com.test.TestClass). When I compile it, yes it works. If I remove the Assets.swf file it doesn't display. Ok.. But I've noticed that the Main.swf file is including all the imported classes (eg: com.test.TestClass) so the Main.swf filesize is pretty much the same as the Assets.swf file.
I also ran it through a decompiler and can see yes in fact Main.swf is including all those Classes from Assets.swf because I'm trying to access them from Main.swf and had to import. So the biggest question is how do I go about this properly? Being able to load the asset file that has movieclips etc that have custom classes. Then create instances of those classes within the document class but only if Assets.swf is loaded.
View 2 Replies
Jul 11, 2009
I've seen that it's very simple to create a document class (a class associated to the main timeline itself), or an instance of a class which is linked to a single asset (e.g. a movie clip).But what if I need to implement a class (let's call it Main) which uses multiple assets from the Flash library? The only way I know to do this is by instantiating any asset with its linked class, and passing them all to the Main constructor like this:
ActionScript Code:
var asset1:Asset1 = new Asset1(...);
var asset2:Asset2 = new Asset2(...);
var asset3:Asset3 = new Asset3(...);
[code].....
This is kind of a tedious process, especially when the composition hierarchy is long and you have to pass them all as arguments through many nested classes.For instance, I needed to link a preload sprite (the typical circle in gradient color which is constantly rotating until the load is complete) from the library to any thumbnail class of a gallery, which in turn is part of another class, which in turn is part of the main class. So I needed to pass this preload clip as an argument throughout the nested classes.
View 8 Replies
Sep 16, 2010
I have built a component, but the assets do not appear in the symbol library of the destination fla when I drag the component to the stage. This is fine, except that I have embedded a font in the component. To ensure the font exists in the destination swf, it must exist in the symbol library of the destination fla.My component extends the UIComponent class, and I have a component shim, although I'm still not entirely sure of its functionI have followed all of the steps found in the 9 part MenuBar tutorial, and everything works, except for this one issue.
View 2 Replies
Feb 17, 2009
I have a Canvas object with a number of imported SWF's that the user can move and resize within the Canvas. What kind of object or library would I need to invoke to export just the Canvas to a SWF or preferably another vector based file type such as EPS?
View 1 Replies
Jul 3, 2010
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
View 4 Replies
Jun 23, 2003
Anyone might know why a movie I'm attaching with 'attachMovie ' method screws up my preloader? During the preview my preloader disappeared. So I clicked off the 'export in 1st frame' check box and suddenly my preloader shows.
View 1 Replies
Sep 30, 2009
My website has hundreds of flash graphs that are all being updated automatically via web services and external xml. My boss wants to publish a book now and the publisher needs the graphs in vector format. My problem is that the flash graphs first load data, then draw the charts dynamically.
Is there any solution to export the SWF after it has loaded my data and preserve the dynamically generated graph? Some graphs have a drill down feature that is only accessible after there is user interaction. These sub-graphs are important to capture in that moment.
Screen shots are not vectors, so they will not work.
I basically need to find a way to export a swf frame after its done loading.
View 1 Replies
Mar 15, 2011
I am using Flash CS3, and creating a game in AS2. Is there a way I can make a movieclip export in another frame other than 1st? Such as frame 3? I had to uncheck all of the movieclips exporting in frame 1, but now they don't work. Is it possible to export them in Frame 3?
View 14 Replies
Apr 29, 2010
I am making a site in flash and trying to add a preloader. I followed some steps from this [URL] and it says to change the AS settings to export classes on frame 2. This makes the preloader work but now I cannot see any items added to the stage from the library. In my init() function I tried adding gotoAndStop(3); but that doesnt do anything. [URL]The main file is Test.fla. The code that adds the objects that I cannot see is in Test.as and the objects that I cannot see are menuBG, menuBGL, menuBGR, menuBGB, shader, grid, and imageStatus, or anything that is imported from the library.
View 1 Replies
Jun 19, 2005
is it possible to use attachMovie without exporting the MC in the first frame.because i tried to do it so i wouldn't have problems preloading, but when i uncheck export in first frame it doesn't show up at all. here is my code just in case it mattered.
i have five buttons 'b1, b2, b3, b4 and b5' and 5 mc 'words1, words2, words3, words4, and words5' being attached to an empty mc on root called 'holder'.
Code:
for (var i = 1; i<6; i++) {
_root.nav["b"+i].onPress = function() {
num = this._name.toString().substring(1, 2);
_root.holder.attachMovie("words"+num, "words"+num, _root.holder.getNextHighestDepth());
};
}
View 3 Replies
Oct 25, 2008
I made a thread about this over on ultrashock and nobody seemed to know the answer, so maybe Kirupa knows! It's like this, I've got a music file in the library of my flash, and I want to play it using ActionScript. So far so good, so I go into properties of the music file and check for it to export for actionscript, and export it to frame 1. But what I've noticed is that then the music file loads BEFORE the preloader, so the preloader doesn't show up in this relatively small flash until it's at the very end. Before that it just seems like the flash isn't working cause nothing shows up. But if I uncheck ""export to frame 1", the sound won't play at all! So what I'm wondering is how I export the sound to actionscript AFTER the preloader
[Code]...
View 6 Replies
Nov 6, 2009
I'm creating library swfs in as3 this way, works like a charm (except for the slow mxmlc compiler):
package {
import flash.display.Sprite;
public class Library extends Sprite {[code]....
I would like to create the same kind of libary using swfmill. I've tried the following swmfill simple xml:
<movie version="10">
Examining the libraries in FlashDeveloper's explorer reveals that the as3 library exports BOTH classes and symbols, but the swfmill library exports ONLY symbols.My host application is accessing the as3 library assets this way:
private var loader:Loader = new Loader();
private function onCreationComplete():void {
this.loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);[code]....
But with no exported swfmill classes, there's obviously nothing to instatiate...Is swfmill expected to export classes this way? If not,is there a way of accessing the symbols without instantiating them as classes?
View 1 Replies
Feb 10, 2011
I want an air application to be able to update the assets it uses, but minimizing the download needed, so only downloading files added since it last updated.I'm thinking this would include a server portion which would zip the needed files based on a version number? Has anyone implemented anything similar / got any thoughts on the best approach to building this sort of system?
View 1 Replies
Apr 12, 2008
I am using a Flasloaded component called flipNavigation Works well but frame one is huge in my movie clip Been following Senolcuar's tutorial as below to ease my preloader [URL] But still get a an issue when publishing the movie as below
[Code]...
View 4 Replies
Dec 24, 2010
I want to reuse the TitleWindow's closeButton inside a simple Flex component I am writing, but I'm having trouble getting it to compile. I copied the code that deals with the closeButton, which looks somewhat like this:
[Code]...
View 1 Replies
Jul 19, 2010
I have a lot of Flash files for which I need to export jpgs of their last frame. write a command for moving the timeline's playhead to the last frame, then exporting a jpg (at Full Document Size, 72 dpi, 96% quality)?
View 10 Replies
Dec 28, 2011
Here is my code:
public function main() {
stage.addEventListener(KeyboardEvent.KEY_UP, hurdlesReactToArrowKeys);
var loginScreen:dealerLogin = new dealerLogin
[code]......
View 1 Replies
Dec 6, 2005
How can I use a linked object without exporting it in the first frame? I'm asking that because I don't want to put an aditional load on the beggining of the loading progress...
View 4 Replies
Jul 27, 2010
I'm unable to make it work :Flash exports the first frame in the SWF file as a PNG file, unless you mark a different keyframe for export by entering the #Static frame label.When publishing the fla, the png is build from the frame that is currently displayed in flash (if my timeline is at frame 3, frame 3 get exported)
View 2 Replies
