ActionScript 3.0 :: Flash - Player Crashing On Every Code Execution?

Feb 29, 2012

Every time I run this code my flash player (projector) is crashing.

function ftwoB(event:MouseEvent) {
navigateToURL(new URLRequest("lessons/lesson2/reading"));
}

[code]....

View 9 Replies


Similar Posts:


ActionScript 3.0 :: Flash Player Crashing IE

Feb 23, 2010

I'm trying to remotely debug a problem with another's teams game at work. They have a game, where if you play it through IE, eventually it will crash with the error "This application has requested the Runtime to terminate it in an unusual way".

Typically, being IE, there's no more info to give an idea of what's causing the crash. I did some searches on the web and found a number of things such as memory leaks (going above 1Gb will crash IE). I've forwarded the info, and the team removed their leaks, but it's still crashing.

View 1 Replies

ActionScript 3.0 :: Crashing Flash Player?

Apr 17, 2009

The Flash site I'm working on is causing Flash player to crash, both inside the browser (taking Firefox down with it) and inside the Flash IDE (taking Flash CS4 down with it) --this is regarding Flash Player 10,0,22,87 (debug version)

The exact point of crash varies considerably and no Flash errors appear, so I can't pinpoint the problem to any particular code.I thought there must be a nasty memory leak somewhere, but since I've started monitoring that (via System.totalMemory) that doesn't appear to be the problem.I thought maybe using hardware acceleration might be the cause, but turning it off hasn't made a difference. I'm using PaperVision3D Great White. Not using full screen--at least not YET. I'm streaming some video, streaming some audio... I don't know what's left.

View 1 Replies

Actionscript 3 :: Flash - Continuing Code Execution After The Error?

Apr 19, 2011

I want to be able to throw an error to be traced to the trace output window and to my flashlog.txt file but continue code execution after the error. Is this possible in Actionscript 3? A try catch will not work either because I need the error to be logged with its call stack.

View 2 Replies

ActionScript 2.0 :: Code Execution - Flash Application Hangs For 3 Or 4 Seconds?

Apr 6, 2009

I am using a while() loop which does its job as soon as I fetch CDATA content from XML. The while() loop basically contains text conversions using replaceText()... Depending on the number of user defined XML nodes, the while loop executes. I see that the flash application hangs for 3 or 4 seconds when this execution happens.

View 6 Replies

ActionScript 3.0 :: [flash Cs4] - Swc And Code Execution - Stop() Commands Don't Get Executed?

Sep 23, 2009

I'm trying this:

- create some asset in library, export for as in frame 1

- export an assets.swc, and set the relative library path publish option in othes flas that use assets.swc

- Then, there's a Main.as document class that uses other classes tha use the assets in assets.swc

Problems start when some asset has some code inside. Say, a button with stopped event states. Well, the stop() commands don't get executed, so the buttons are effectively instantiated, but their timeline plays until the end. Probably because they're not initialized in the timeline (being exported in frame 1, so, in fact, before).Usually, without swc, to solve this problem one would put all assets in frame 2 and then check for cuttentFrame == 3 (http:url...). This is what I'd really like to avoid. And from here the question: is that possible? Is there a way (in flash, not flax) to use swc to properly get assets containing some simple code (usually stop commands) in their timeline?

View 1 Replies

ActionScript 3.0 :: Crashing Flash Player Inside The Browser

Apr 17, 2009

The Flash site I'm working on is causing Flash player to crash, both inside the browser (taking Firefox down with it) and inside the Flash IDE (taking Flash CS4 down with it) --this is regarding Flash Player 10,0,22,87 (debug version)

The exact point of crash varies considerably and no Flash errors appear, so I can't pinpoint the problem to any particular code. I thought there must be a nasty memory leak somewhere, but since I've started monitoring that (via System.totalMemory) that doesn't appear to be the problem. I thought maybe using hardware acceleration might be the cause, but turning it off hasn't made a difference. I'm using PaperVision3D Great White. Not using full screen--at least not YET. I'm streaming some video, streaming some audio... I don't know what's left.

View 8 Replies

Flash :: Professional - NetStream And Player 10.1 - Crashing In Browser

Jun 24, 2010

I'm into LMS courses, and use a lot until today the combination of flv's for characters and loadSound for make them talk. Until today because after this week I've update my flash to 10.1 and boom, all my courses now are crashing in any browser that have the update. I already noted that the problem is the netStream. Here's my current Actions just to quote, I've been using this since version 9 of the flash player with no problems:

[Code]...

View 3 Replies

Flash :: Professional - Adobe Player Crashing While Playing On A Game

Aug 26, 2010

After installing the latest version of flash (10.1 I think) it keeps crashing while playing on a game that requires it. I have uninstalled and reinstalled and it just keeps happening.

View 2 Replies

ActionScript 2.0 :: Load YouTube Videos Into Flash Player Without Crashing It?

Sep 14, 2009

There are 10 buttons on the stage and a display area. Clicking any button runs this function[code]...

This works well for the first few videos but after 5 or 6 unload/load cycles, the player gets slower and slower and eventually stops responding. I thought the basic idea of unloadMovieNum was to remove a movie from the stage and reclaim the memory but this doesn't seem to be the case.

View 9 Replies

Professional :: New Version Of Skype Crashing Adobe Flash Player Plugins?

Jul 12, 2010

Operating System - Windows 7, 64 bit Web Browsers - Mozilla Firefox, Version 3.6.6 Microsoft Internet Explorer, 32 bit, Version 8.0 Flash Player Version 10.1 For some reason, the new version of Skype is playing havoc with my Flash Player plugins for both Firefox and Internet Explorer.
 
I downloaded and installed the latest Skype software today and noticed immediate problems. Skype was not responding and the Flash Player plugins on both browsers began crashing. I uninstalled both Skype and the Flash Player plugins. I then restarted my computer and reinstalled the Flash plugins. Functionality was restored to the Flash plugins in my browsers. I then reinstalled Skype. It was immediately non-functional and my Flash plugins started crashing again.I am now at the point where I have reinstalled the Flash plugins again and functionality is restored. I know if I try to install Skype, the Flash plugins will crash again.

View 3 Replies

ActionScript 2.0 :: Optimizing Code Execution?

May 7, 2002

I have written a small bit of actionscript code which is designed so that small objects fly across a window from left to right at varying speeds, and then get moved back again with different attributes once they reach the right edge. The code is fully functional.My problem is that this eats a huge amount of system resources, and runs slowly on a 1Ghz machine. Is there a more efficient way to achieve this?

//Frame 1 Code - create 20 objects of varying scale, x/y position and alpha.

dcount = 1;
dupcount = 20;
while (dcount<=dupcount) {[code]......

View 1 Replies

ActionScript 3.0 :: Pause Execution Of Code?

Jul 29, 2009

How would I pause the execution of code? In Python it would beCode:pause(number of seconds)but I have no idea how to do this in AS3. I don't want to pause the frame, only the execution of the code.

View 7 Replies

ActionScript 3.0 :: Timer To Delay The Execution Of The Code

Feb 1, 2011

I am trying to delay the execution of the code within a function. But it is not working. I would like content of the doTour() function execute 25 seconds of interval.

[Code]...

View 7 Replies

Flex :: Measure Various Phases Of Code Execution?

Aug 12, 2011

Is there a way to measure the average time it takes my code to run and each frame to render for my Flex app? More specifically, I know how to use getTimer() but I'm not sure about which events I should listen to in order to do this. I was reading this post and am not sure how you'd figure out how long the actual rendering took (it would seem like it may be the time between the RENDER event fires and the next ENTER_FRAME event fires, but I'm not sure). Also, not exactly sure where the user code happens, or whether I should care about EXIT_FRAME and FRAME_CONSTRUCTED. [code]...

View 3 Replies

ActionScript 2.0 :: Forcing Code Execution Before Moving On

Jul 12, 2003

I am trying to set a couple of _global variables with if-then statement, and just after this, use these _globals in the code. However, the code moves on before the _globals are properly set. How can I make the code wait (no timers, please) until the _globals are set?

View 7 Replies

ActionScript 2.0 :: Code Execution Delay For Unknown Reasons?

May 8, 2009

The following code is on a movieclip being used as a button.The code is pretty simple. Originally the code was just the code after the gap. This code loaded up a movieclip (filtermc) off-stage that runs through an xml file and preloads a form. This takes a second or two, and when finished that newly loaded movie tweens into position. The tween code is on a frame in the 'filtermc' movieclip.

The problem is that in the second or two that it takes for this movie to load, people could click the button a second time which messes up the form/movieclip (everything on it is unresponsive, I think because two movieclips having the same name)

Anyway, I decided to solve this problem by loading a transparent blocker movieclilp in front of this button to keep it from being double clicked. This blocker clip is just a movie that has an empty onRelease function in it so that the button below it cannot receive any new clicks. Also, the button goes to another frame where it says "loading..." to provide feedback to the user.

The Problem When I click this button, there is a delay of about 2 seconds before the semitransparent (for testing) blocker appears. In fact it appears just as the filtermc clip has started it's tween into place.

It is almost like this code is running out of order. The traces come back in the correct order so I know it is not running out of order, but why the 2 second delay before the blocker movie gets loaded up? The button also takes 2 seconds to show the "loading" frame. The traces also have the same 2 second delay.

If I comment out the second half of the code (the filtermc part) then the blocker movieclip pops up instantly and the button changes frame instantly.

PHP Code:

on (release) {
//problems occur if button is pressed twice before filtermc scrolls into view
//this button must be disabled until the filtermc finishes loading

[code]....

View 1 Replies

ActionScript 3.0 :: Way To Start A Code Execution After Loading A File?

Jul 16, 2009

I try to execute a code on my Stage, the problem is when I declare my own class on which they load the file (xml) the code start in the background.I tried to add a listener in the custom class for Event.COMPLETE but it doesn't work because it only affect the custom class, not the whole movie.I tried something like this:

Code:
var xmlLoad: XMLLoadData = new XMLLoadData("navigation.xml");
var menuBox:MenuBox = new MenuBox();

[code].......

View 2 Replies

ActionScript 3.0 :: Allowing The Movie To Run During Complex Code Execution

Jul 17, 2009

I have this complex XML processing code that builds up thousands of objects on stage. This might take some time. Perhaps not that big time to bring up that message about slow code execution, however signifficant enough to cause interface uncomfortabilities. I understand very well that I can restructure my code in order to save all contextual variables, all counters in an object that is passed down to onEnterFrame events that process it a little bit and then pass it further, until the job is done. However, before I go into dissecting my code, I wanted to make sure if there really is not a way how tom tell flash player do it's frame rendering routine while a complex code is executed in background (without splitting it up).

View 1 Replies

ActionScript 3.0 :: Start A Code Execution After Loading A File?

Jul 16, 2009

I try to execute a code on my Stage, the problem is when I declare my own class on which they load the file (xml) the code start in the background.

I tried to add a listener in the custom class for Event.COMPLETE but it doesn't work because it only affect the custom class, not the whole movie.[code]...

View 7 Replies

ActionScript 3.0 :: Forcing Code Execution Order In Conditional Statements?

Feb 17, 2010

I have created an image gallery where each "slide" is an image loaded by one UILoader component. Everything works, except I noticed that as a user it is annoying to wait for each new slide to load.So, even with my limited knowledge of AS3, I decided to figure out a way to load the next upcoming image before the user requests itone for odd numbered slides, one for even numbered slides. That way, when the user is viewing a slide with an odd number in the first loader, the next image can be loaded into the second (currently invisible) loader and ready to go when requested button would simply toggle the visibility of these two loaders.

function nextButton(event:MouseEvent):void
{
imageNumber++;

[code].....

View 11 Replies

ActionScript 2.0 :: Pause The Execution Of Code For A Set Amount Of Time Before Resuming?

Jun 21, 2006

pause the execution of my code for a set amount of time before resuming?

View 4 Replies

ActionScript 2.0 :: CS3 Flash Player 6 Code To Player 7 Causes Script Not To Work

Apr 29, 2010

I have a slight problem when publishing to Flash Player 7 but works perfectly in Flash Player 6, below is the code:[code]In short this creates a list where the values are kept in SharedObject.I need to use a WebService so I require Flash Player 7, as I said this works as expected in Flash Player 6, so maybe someone may know a pitfall or two when migrating code form 6 to 7?

View 1 Replies

ActionScript 2.0 :: Code Works For Flash Player 6 Settings But Not For Flash Player 8?

Jul 1, 2007

I'm pretty new to Action script and I have a problem here that I can't seem to figure out.

I have this Action Script Code which is attached to a simple movieclip, and it all works IF the general settings are set for Flash Player 6.

It does not work for Flash Player 7 or above, which is probably because this is Actions Script 1 Code...

I attached the .fla file and also here's the code:

[Code]...

View 2 Replies

ActionScript 2.0 :: Flash Player 6 Code Not Working In Flash Player 10?

Mar 16, 2009

I would like to know how the following ActionScript, that only works in Flash Player 6, can be updated to work in a Flash Player 10 file.[URL]As it says, "On Publish Settings set Flash Player version on Flash Player 6, or this movie will not work."It works fine published as FP6 but not as FP10 as I need it to be. This AS is added to a movie symbol that contains a button for a rotating menu effect.

onClipEvent (load) {
hx = 300/2;
hy = 400/2;
r = 100;

[code]....

View 3 Replies

ActionScript 3.0 :: "Pause" Code Execution, And Wait For Result?

Apr 17, 2009

Visual Studio had a command "showDialog()" which allowed you to show your form as a dialog box on the screen. The advantage to this was that the code calling the dialog box would pause, stopping execution entirely until the dialog box closed. The benefit was you could write your code as follows (made "actionscriptey"):

Code:
var result:DialogResult = form1.showDialog();
if (result == DialogResult.OK)

[code].....

View 1 Replies

Flash :: Paste A Video Player's Code From A Website In It?

May 27, 2009

Is it possible to paste a video player's code from a website in flash?

View 7 Replies

ActionScript 3.0 :: Code For Flash Player 10 To Duplicate An DisplayObject?

Jun 21, 2010

im trying to make a tile map. is there a code for Flash Player 10 to Duplicate an DisplayObject?

View 4 Replies

ActionScript 2.0 :: Code Makes Flash Player Run Slowly

Jul 7, 2005

I am trying to get my mc to move up and have copies of that same mc follow about every 40 pixels. Basically a scroll with my "8ball" mc. Showing the mc every 30 pixels in the y-direction. I am using this code in the mc and I get a message saying that the script is causing Flash Player to run slowly.[code]

View 1 Replies

Professional :: Add HTML Code(stickam Player) To Flash Website?

Jul 28, 2010

I made a flash website, which is aflash movie. How can i add an html code to this movie or websiteinside flash adobe cs3 in the fla file?????

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved