I have made 2 scenes. I am trying to jump 1scene to next scene you can find source file from here
scene1 is LoderScreen
scene2 is GameScreen and frame label is "start"
I did this gotoAndPlay("start","GameScreen")
But it is showing error/
Original FLA file [URL]
I have an eventListener on a particular movieClip that triggers the timeline to play when clicked. This should play through a short tween, then hit another piece of actionscript in the last frame of that scene, which should take you to the next scene. I also have an audio file loaded into a soundChannel, as well as a few timers that operate a click prompt over the movieClip already mentioned. My bug is that if you click on said movieClip before the soundChannel is finished playing, all functions properly. However, if you wait for the sound to finish, this initiates a few timers that cause a prompt to fade in, telling you to click on the movieClip. If you click on it, still, everything works fine. But once the timers complete their work, and the click prompt fades back out, the tweens do not operate properly. If you then click on the movieClip, the timeline seems to play doubletime until coming to a stop() action in the next scene.
[URL]
jumping from from scene to scene once the play head reaches the end in AS3? Scenes do not play one after another like they used to. Below is some code I found that works with errors, however I'm not using a MC like the code displays "mc1". Not really sure on how the MC fits in? import flash.display.Scene; var scene:Scene = mc1.currentScene;trace(scene.name + ": " + scene.numFrames + " frames");
View 4 RepliesFor some reason i'm having problems swapping scenes in my flash movie. At first i put the action in a "actions" named layer and a link to a button. So basicly when scene1 loads the frame 1 action is "stop ();". The viewer clicks on button1 which has a code of;
[Code]...
I want to have an animated button that go's to the next scene and plays. This is the code I have on the button inside the movie clip:
ActionScript Code:
on (rollOver) {
gotoAndPlay("rollover");
} on (rollOut) {
gotoAndPlay("rollout");
} on (release) {
gotoAndPlay("Scene 2", 1);
}
For some reason this doesn't work? Is the problem that the code on the button is within a movie clip?
-How would I make it so when my clip gets to a certain frame, it will randomly gotoAndPlay a random frame on a different scene?
-All of the frames that I want it to randomly go to are labeled.
I am making a small website out of flash and I have a photo gallery in a separate scene. I have five photo galleries and so I have five buttons that will lead to those five galleries.
The code of one of the five buttons is
on (release) {
_root.gotoAndPlay("Content_Photography");
}
Works great, but the first 10 frames of this new scene "Content_Photography" is an intro and then I would like that it would jump to the corresponding gallery that these galleries will be laid out on the timeline.
What would i put after _root.gotoAndPlay("Content_Photography");?
I know that you are not supposed to target a frame number but here's the deal.I have 2 scenes (Scene 1 and Scene 2). Both scenes are currently the same and I will be customizing them at a later date.The scenes are made up of multiple MC's and I need to target a particular frame. I have named the frame and tried the following script to no avail. When it does work, it goes to the first frame of Scene 2 every time like it is just traveling along the timeline and jumping to Scene 2.[code]
View 9 RepliesI have a mc INSIDE one of the layers in main scene, how to make it go to specified frame back on the main scene, when finished playing? Flash, cs4, as3.
View 1 Replieshow to code a simple load sequence scene. This is how I had it set up in AS2 -I've got two scenes, "Scene 1" and "Scene 2". I've got a 10 frame shape tween in Scene 1. On the 9th frame, I assigned actionscript that will check to see if frame 40 of Scene 2 is loaded, and if it is, gotoAndPlay Scene 2, Frame 1. Then have action in frame 10 of Scene 1 that says to gotoAndPlay scene 1 frame 1 of the current scene. This way scene 1 loops until frame 40 of scene 2 is loaded, at that point, scene 2 frame 1 plays.
How could I set this up in AS3? Here is what I tried - I've got two scenes, "Scene 1" and "Scene 2". I've got a MC that is a simple shape tween that loops in the "Scene 1". I'm trying to assign codein "Scene 1" that will check to see if frame 40 of Scene 2 is loaded. If it is, gotoAndplay Scene 2 frame 1. If frame 40 of Scene 2 is not loaded, continure to loop the MC unitil it is. Here is the code I've got for the MC in the "Scene 1"
[Code]....
I need to make it so when the movie clip that is in frame 1 of scene 1 is done it plays frame 2 of my scene 1. How do I do this Im making a cartoon where a characters mouth which is the movie clip which is moving and when it is done moving i want it to go to and plays frame 2 on scene one. Its to late to do everything on the timeline, and I cant just copy the movie clip, i could but I want to just be able to do this go to and play on scene one from the movie clip instead of doing all my work all over again
View 3 Replieshow do you make a button use the gotoandplay action to go to another scene? Its scene 420 i need to get to
View 3 RepliesI put a movie stopped, I want that when I press (enter) the movie go to and play my next scene. How I can make that?
View 2 RepliesI have spent many hours trying to nut this one out.. I have an animated button which I am animating using a tween class. It works fine, my problem is this, I need to jump to another Scene after the animation has finished.
View 7 RepliesI need to make it so when the movie clip that is in frame 1 of scene 1 is done it plays frame 2 of my scene 1. How do I do this , PLEASE HELP ME!!! Im making a cartoon where a characters mouth which is the movie clip which is moving and when it is done moving i want it to go to and plays frame 2 on scene one. Its to late to do everything on the timeline, and I cant just copy the movie clip, i could but I want to just be able to do this go to and play on scene one from the movie clip instead of doing all my work all over again.
View 3 RepliesI've just started self-learning Flash, so am not very familiar with it. I tried to do a game e-card and there were some problems which i couldn't find an answer for them after hours googling: I'm using Flash CS5 AS3. So I'm trying to create a button that would lead to another scene, i named it "ok button" (instance - "ok_btn") and the scenes are just "scene 1" , "scene 2"
[Code].....
I'm working on a friends site - Lorenshaw.net using CS3 and all of the code for the buttons is pointing to the right scenes yet it goes to the wrong scenes. Does anyone know what the problem could be? I also have some stop actions at the end of each scene. For buttons I'm using On release, gotoAndPlay "Scene, frame number"
View 1 RepliesIm designing my own game in flash, iv set up a score text box and it works fine. Except i just cant seem to get it to gotoandplay another frame,scene, when it hits a certain score??
View 4 Repliesive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
I'm adapting this iTunes coverflow style gallery for my own purpose [URL] Basically, the locations of the artwork and the URLs for when you click on a picture are stored in an XML file. Is it possible to adapt the AS or XML so that instead of opening a URL, clicking on a cover jumps to a particular frame on the timeline? Basically what I want to do is have the first and last items acting as previous and next buttons to go to a different frame on the timeline. I guess what i need to do is get the actionscript to do whatever is within and replacing that with the action I want it to perform?
View 2 Repliesso I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
No..not that type of parenting ;DOK,I have a main scene, then sitting in the root scene I have 2 movie clips.1)centro2)fotoIn the first movie "centro" there is a menu btnI want this menu btn to call up mclarge + its frame (1) thats housed 3 levels inside the foto mc in root.
Main scene - (1) centro (banner which houses menu btn)
(2) foto_mc
- Main_boy_mc (<---works if menu btn houses in here)
[code].....
I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesArgumentError: Error #2109: Frame label null not found in scene Scene 1. at flash.display::MovieClip/gotoAndPlay() at intro_fla::MainTimeline/intro_fla::frame606()[intro_fla.MainTimeline: :frame606:3]
View 3 RepliesI'm trying break down a large Flash project into smaller swf's using a Loader :
stop();
var reqA:URLRequest = new URLRequest("New_Inro.swf");var loaderA:Loader = new Loader();
function imageLoadedA(event:Event):void { addChild(loaderA);} loaderA.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoadedA);loaderA.load(reqA);
Some of these swf files are animations which have code that states :
MovieClip(parent).gotoAndStop("frameThree");
The first loader works but I cannot get that swf to move on to the next frame(frameThree) to load the next swf file
Instead I get this message
ArgumentError: Error #2109: Frame label frameThree not found in scene Scene 1. at flash.display::MovieClip/gotoAndStop() at New_Inro_fla::MainGuy_1/frame146()[New_Inro_fla.MainGuy_1::frame146:2 ]
I'm getting this error in the OUTPUT window, when I PREVIEW (COMMAND + RETURN) my SWF:
ArgumentError: Error #2109: Frame label nGallery_btn not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at BrookBrovazMusic004_fla::MainTimeline/pageSelect()
- The funny thing is that the SWF works the way I want it to. You can view it here: http://brookbrovaz.com
- I just don't like the idea that something's wrong, according to the OUTPUT window anyway.
[Code]...
the error is:
ArgumentError: Error #2109: Frame label instance121 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at Untitled_fla::MainTimeline/goLabel()
this is my code:
stop();
function goLabel(e:MouseEvent):void
{
[code]....
i am using a movie clip button to open a swf with a loader. hope i m not missing any information/other coding....
I've created a class which simulates an action for example a ball bouncing about a screen thus I'd create it like so:
Code:
var Ball1:ball = new ball(x,y);
How would I go about adding this to a loop, in a sense of every frame add another ball till you reach the maximum balls
currently after looking in help, google and forums this is all I could find
Code:
var ["Ball"+currentball]:ball = new ball(x,y);
but this doesn't seem to work and just causes
"**Error** Scene=Scene 1, layer=balls, frame=1:Line 15: Identifier expected"
I have created a new Flash file using A3.It has a menu system which all works, I have included trace code that outputs button pressed.So the next step is when the right button is clicked it takes them to the next scene. Please note I have coded it in AS3. When I compile it returns no error however at run time when I click on the buttomit returns the following error:
Menu 1, button 1
ArgumentError: Error #2109: Frame label contact not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at menuformason_fla::MainTimeline/itemButtons()
[code]....
